Creating A Bootable WinPE 2.0 USB Key
来源:互联网 发布:超好听的伤感网络歌曲 编辑:程序博客网 时间:2024/05/22 00:50
Creating A Bootable WinPE 2.0 USB Key
Windows Preinstallation Environment (PE) 2.0 is a slimed down version of Windows (hence all the MiniNT references) that used to be the exclusive domain of OEM's providers. Microsoft has wisely chosen to offer this to the masses as part of the Windows AIK. USB keys can be found just about anywhere these days for next to nothing. Combine the capabilities of WinPE with the portability of a USB key and you just made a very powerful troubleshooting, imaging, and data recovery tool. Here is a quick step by step on how to do just that:
Step 1. ) Get USB Key
You probably already have a few and if not you can purchase these just about anywhere, so I won't tell you where to get one. You should get a USB 2.0 device of at least 512mb in size, but if you plan on putting a lot into a custom PE install or plan on using it to transfer data too then you are better served getting a larger size (2.0-4.0GB)
Step 2.) Download and Install the Windows Automated Installation Kit (Windows AIK)
This deployment oriented tool set contains Windows PE 2.0.
Step 3.) Format the USB key
Note: This must be done from Windows Vista
Start a command prompt and run the following. This set of commands assumes your USB key is detected as disk 1, you should double check that by doing a list of the disks before cleaning it. If you have multiple hard drives you could end up wiping your second drive using this command. You have been warned.
- Diskpart
- select disk 1
- clean
- create partition primary
- select partition 1
- active
- format fs=fat32(此处非常重要,我第一次在Win7下用的是NTFS,结果启动不了)
- assign
- exit
Step 4.) Setup Windows PE
- In this step you will create and customize WinPE for your disk. From the machine that you installed the Windows AIK go to the start menu and select "Windows PE Tools Command Prompt" from under the Windows AIK program folder.
- Run Copype.cmd x86 c:\winpe_x86
- you can create an 64-bit version by changing the architecture from x86 to amd64
- Add customizations to WinPE
- copy any tools you want available to the C:\winpe_x86\iso folder such as imaging tools if you want to use this for capturing images (imagex, wimscript.ini)
Step 5 .) Copy Windows PE to USB Key
Insert the USB key into the machine that you have WinPE on and run the following command to copy the contents to the USB Key
xcopy c:\winpe_x86\iso\*.* /e /f e:\
change c: to reflect the drive your files on and e: to be your USB key.
There you have it...a quick way to make a handy USB version of WinPE that you can take with you anywhere. These can be used in almost any modern computer that supports USB booting. More information on this and other great things you can do withWindows PE are located in the Windows AIK.
- Creating A Bootable WinPE 2.0 USB Key
- Creating A Bootable WinPE 2.0 USB Key
- How To Create A WinPE 2.0 Bootable CD or DVD?
- create a bootable USB stick
- Making a Kali Bootable USB Drive
- make a bootable osx usb sticky
- Creating a key
- How to create a bootable USB stick on Ubuntu
- How to create a bootable USB stick on OS X
- How to create a bootable USB stick on Ubuntu
- How to create a bootable USB stick on Windows
- Bootable USB Stick
- win7 -- bootable usb drive
- Create a Bootable Version of the OS X Mavericks Installer on a USB Flash Drive
- Bootable USB stick with G4L
- [LINUX LIVE USB]How to Make a bootable USB Drive to Install Fedora instead of using a physical DVD
- How To: Install Portable Linux Ubuntu on a bootable USB Flash Drive from SUN VirtualBox
- How to make a bootable[Win VISTA/7/8] USB flash Media
- 系统平均负载(Load average)与CPU利用率
- flash builder 4 与flex3组件对照
- jQuery中queue和dequeue的用法
- Wince 驱动动态加载调试
- Solrj实时更新遇到数据变化的问题
- Creating A Bootable WinPE 2.0 USB Key
- SQL SERVER 典籍
- 显示构造函数
- VxWorks与SNMP代理的开发
- Spring事务问题 - 大数据clob插入需要事务
- Spring Security 中的盐值加密
- Android Intent 和 Intent Filter
- 不改动已存在代码,程序退出时检测内存泄露
- quart 总结