文中代码的link
下面是一个ALSA录音的测试程序，只能录5秒。
编译之后用法如下：./test > /test.wav
遇到的问题：
1.运行时遇到的问题是:alsa的设备节点都建在了/dev下面而不是/dev/snd下面，导致程序出错。
可以用下面3条命令手动建立节点：
mknod dev/snd/controlC0 c 116 0
mknod dev/snd/pcmC0D0c c 116 24
mknod dev/snd/pcmC0D0p c 116 16
2.由于缺少动态库，导致很多接口都找不到。但是实际上这些动态库里面用的方法静态库里面都有，所以干脆改了程序直接调用静态库。
附录：
/*
This example reads from the default PCM device
and writes to standard output for 5 seconds of data.
*/
/* Use the newer ALSA API */
#define ALSA_PCM_NEW_HW_PARAMS_API
#include
int main() {
long loops;
int rc;
int size;
snd_pcm_t *handle;
snd_pcm_hw_params_t *params;
unsigned int val;
int dir;
snd_pcm_uframes_t frames;
char *buffer;
/* Open PCM device for recording (capture). */
rc = snd_pcm_open(&handle, "default",
SND_PCM_STREAM_CAPTURE, 0);
if (rc <0 br/> fprintf(stderr,
"unable to open pcm device: %s\n",
snd_strerror(rc));
exit(1);
}
/* Allocate a hardware parameters object. */
snd_pcm_hw_params_alloca(¶ms);
/* Fill it in with default values. */
snd_pcm_hw_params_any(handle, params);
/* Set the desired hardware parameters. */
/* Interleaved mode */
snd_pcm_hw_params_set_access(handle, params,
SND_PCM_ACCESS_RW_INTERLEAVED);
/* Signed 16-bit little-endian format */
snd_pcm_hw_params_set_format(handle, params,
SND_PCM_FORMAT_S16_LE);
/* Two channels (stereo) */
snd_pcm_hw_params_set_channels(handle, params, 2);
/* 44100 bits/second sampling rate (CD quality) */
val = 44100;
snd_pcm_hw_params_set_rate_near(handle, params,
&val, &dir);
/* Set period size to 32 frames. */
frames = 32;
snd_pcm_hw_params_set_period_size_near(handle,
params, &frames, &dir);
/* Write the parameters to the driver */
rc = snd_pcm_hw_params(handle, params);
if (rc <0 br/> fprintf(stderr,
"unable to set hw parameters: %s\n",
snd_strerror(rc));
exit(1);
}
/* Use a buffer large enough to hold one period */
snd_pcm_hw_params_get_period_size(params,
&frames, &dir);
size = frames * 4; /* 2 bytes/sample, 2 channels */
buffer = (char *) malloc(size);
/* We want to loop for 5 seconds */
snd_pcm_hw_params_get_period_time(params,
&val, &dir);
loops = 5000000 / val;
while (loops > 0) {
loops--;
rc = snd_pcm_readi(handle, buffer, frames);
if (rc == -EPIPE) {
/* EPIPE means overrun */
fprintf(stderr, "overrun occurred\n");
snd_pcm_prepare(handle);
} else if (rc <0 br/> fprintf(stderr,
"error from read: %s\n",
snd_strerror(rc));
} else if (rc != (int)frames) {
fprintf(stderr, "short read, read %d frames\n", rc);
}
rc = write(1, buffer, size);
if (rc != size)
fprintf(stderr,
"short write: wrote %d bytes\n", rc);
}
snd_pcm_drain(handle);
snd_pcm_close(handle);
free(buffer);
return 0;
}
3. 其他：oss测试方法如下。
录音 cat /dev/oss > test.wav
播放 cat /mnt/test.wav > /dev/oss
