配置firewire or IEEE1394摄像机环境
来源:互联网 发布:淘宝客服统计销售额 编辑:程序博客网 时间:2024/06/15 21:00
.. Optional: Setting up Firewire and libdc1394/libraw1394
The two libraries libdc1394 and libraw1394 can also be installed with a package tool. For instance, under Debian Linux, the libraries are installed with:
apt-get install libraw1394 and apt-get install libdc1394.
1.2. Installing a firewire camera
In order to use a firewire camera under Linux, the four kernel modules named raw1394, video1394, ohci1394 and ieee1394 must be loaded. This is accomplished under Debian Linux using the command modprobe. modprobe raw1394 and modprobe video1394 are sufficient to activate all four modules. With the command lsmod | grep 1394, it can be checked whether the four modules have been successfully loaded. This command should list the above mentioned four modules. If this should not be the case, try to add each module individually with the command modprobe.
In order to allow a user or an application to access the interface to the camera, the user has to be registered in the appropriate groups (usually video) of the devices /dev/raw1394 and /dev/video1394, or the user privileges of the devices must be set appropriately. For this, root privileges are necessary.
1 方案
1.1. Installation of libdc1394/libraw1394The two libraries libdc1394 and libraw1394 can also be installed with a package tool. For instance, under Debian Linux, the libraries are installed with:
apt-get install libraw1394 and apt-get install libdc1394.
1.2. Installing a firewire camera
In order to use a firewire camera under Linux, the four kernel modules named raw1394, video1394, ohci1394 and ieee1394 must be loaded. This is accomplished under Debian Linux using the command modprobe. modprobe raw1394 and modprobe video1394 are sufficient to activate all four modules. With the command lsmod | grep 1394, it can be checked whether the four modules have been successfully loaded. This command should list the above mentioned four modules. If this should not be the case, try to add each module individually with the command modprobe.
In order to allow a user or an application to access the interface to the camera, the user has to be registered in the appropriate groups (usually video) of the devices /dev/raw1394 and /dev/video1394, or the user privileges of the devices must be set appropriately. For this, root privileges are necessary.
2方案
http://tldp.org/HOWTO/libdc1394-HOWTO/intro.html
有很详细的介绍和指导
- 配置firewire or IEEE1394摄像机环境
- IEEE1394
- EasyCamera摄像机配置
- EasyCamera摄像机配置
- 大华摄像机ntp配置
- 笔记本关键字:IEEE1394接口
- USB AND FIREWIRE HELP
- VS2017+PCL1.8.1+Cmake(3.6 or later)环境配置
- IEEE1394技术与原理简介
- IEEE1394(火线)接口全面了解
- USB与IEEE1394的对比
- 摄像机
- 摄像机
- 摄像机
- 摄像机
- 摄像机
- 摄像机
- 摄像机
- Python内存池管理与缓冲池设计
- (简单)maze(CD1480)
- Winloader 从手机读取信息时出错的解决办法
- 迷茫的计算机专业
- 字符串处理函数
- 配置firewire or IEEE1394摄像机环境
- 3 Fancy Forms with JavaFX CSS
- sqlserver 取月初月末的时间
- 调优Linux及Websphere调优资料整理
- 修改TI SensorDemo例程,摆脱烦人的摇杆与按键吧!
- 反射
- Linux下几个比较好用的软件
- GUID生成器(二)
- 提高工作效率 WebSphere调优的感受