c++ 多线程问题
来源:互联网 发布:苏州长风航空电子 知乎 编辑:程序博客网 时间:2024/05/17 18:12
1.Solaris .vs. Linux Posix 库函数
Solaris 库(lib 线程)Linux POSIX 库(libp 线程)操作sema_destroy()sem_destroy()销毁信号状态。sema_init()sem_init()初始化信号。sema_post()sem_post()增加信号。sema_wait()sem_wait()阻止信号计数。sema_trywait()sem_trywait()减少信号计数。mutex_destroy()pthread_mutex_destroy()销毁或禁用与互斥对象相关的状态。mutex_init()pthread_mutex_init()初始化互斥变量。mutex_lock()pthread_mutex_lock()锁定互斥对象和块,直到互斥对象被释放。mutex_unlock()pthread_mutex_unlock()释放互斥对象。cond_broadcast()pthread_cond_broadcast()解除对等待条件变量的所有线程的阻塞。cond_destroy()pthread_cond_destroy()销毁与条件变量相关的任何状态。cond_init()pthread_cond_init()初始化条件变量。cond_signal()pthread_cond_signal()解除等待条件变量的下一个线程的阻塞。cond_wait()pthread_cond_wait()阻止条件变量,并在最后释放它。rwlock_init()pthread_rwlock_init()初始化读/写锁。rwlock_destroy()pthread_rwlock_destroy()锁定读/写锁。rw_rdlock()pthread_rwlock_rdlock()读取读/写锁上的锁。rw_wrlock()pthread_rwlock_wrlock()写读/写锁上的锁。rw_unlock()pthread_rwlock_unlock()解除读/写锁。rw_tryrdlock()pthread_rwlock_tryrdlock()读取非阻塞读/写锁上的锁。rw_trywrlock()pthread_rwlock_trywrlock()写非阻塞读/写锁上的锁。
http://fanqiang.chinaunix.net/a4/b8/20010811/0905001105.html
http://blog.csdn.net/meteor1516/archive/2008/05/07/2409705.aspx
如何在linux 下c++中类的成员函数中创建多线程
linux系统中线程程序库是POSIX pthread。POSIX pthread它是一个c的库,用C语言进行多线程编程我这里就不多说了,网上的例子很多。但是如何在C++的类中实现多线程编程呢?如果套用C语言中创建多线程的方式,在编译的时候会出现...does not match `void*(*)(void*)..这样的错误。出现这种情况的原因是,编译器在处理C++和C文件上是不同的,也就是说C++和C语言里边指针函数不等价。解决这种错误的方法
有两种:
1、不要将线程函数定义为类的成员函数,但是在类的成员函数里边调用它。
例如:
[test.h]
#ifndef TEST_H
#define TEST_H
class test
{
public:
test();
~test();
private:
void createThread();
};
#endif
[test.cpp]
test::test()
{}
test::~test()
{}
void *threadFunction()
{
printf("This is a thread");
for(;;);
}
void test::createThread()
{
pthread_t threadID;
pthread_create(&threadID, NULL, threadFunction, NULL);
}
[main.cpp]
#inlcude "test.h"
int main()
{
test t;
t.createThead();
for(;;);
return 0;
}
2、将线程函数作为类的成员函数,那么必须声明改线程函数为静态的函数,并且该线程函数所引用的其他成员函数也必须是静态的,如果要使用类的成员变量,则必须在创建线程的时候通过void *指针进行传递。
例如:
【test.h】
#ifndef TEST_H
#define TEST_H
class test
{
public:
test();
~test();
private:
int p;
static void *threadFction(void *arg);
static void sayHello(int r);
void createThread();
};
#endif
[test.cpp]
test::test()
{}
test::~test()
{}
void *test::threadFunction(void *arg)
{
int m = *(int *)arg;
sayHello(m);
for(;;);
}
void sayHello(int r)
{
printf("Hello world %d!\n", r);
}
void test::createThread()
{
pthread_t threadID;
pthread_create(&threadID, NULL, threadFunction, NULL);
}
[main.cpp]
#inlcude "test.h"
int main()
{
test t;
t.createThead();
for(;;);
return 0;
}
====================================================================================
http://bigbossman.blogbus.com/logs/10761605.html
Linux下的编程一直是C语言的天下,但老是用C感觉写的很乏味。用面向对象方法编程,听着都倍有面子。于是决定先在的这个项目用C++来写。虽然不一定能“以C++的思想”来写C++,少会有C++的样子。
但是问题来了:我需要在程序中动态创建一个线程,而pthread不接受C++类的成员函数作为参数。
原因也很简单,类成员是在类被实例化成为对象后才存在的,即在编译时是不存在的,编译器无法取得函数的确切入口地址,自然无法通过编译。
照这个分析,如果把要调用的类成员函数声明为静态的,pthread_create就可以找到函数的地址了。但这样一来的话,由于类中的静态函数无法调用类的非静态成员。线程函数的功能就受到了很大限制,也就没有比要将其放在类中了。
最容易想到的解决方案就是写个C函数,然后再C函数中调用C++对象的成员函数。
比如类为
class foo(){
public :
thread();
}
class *f;
void *bar(void *arg){
f->thread();
return NULL;
}
int main(){
.........
f=new foo();
pthread_create(&tid,&tattr,bar,NULL);
}
显然这种发法太笨了,而且对象只能是全局的。
注意到线程函数bar可以有一个任意类型的指针作为参数,那我们何不将对象通过这个指针将对象变为bar的一个参数,从而让我们的程序好看一些。
class foo(){
public :
thread();
}
void *bar(void *args){
foo *f=(foo *)args;
f.thread();
return NULL;
}
int main(){
.........
foo *f=new foo();
pthread_create(&tid,&tattr,bar,f);
}
如果把上述两种方法结合起来即对象中的静态函数+通过指针参数传递对象,那又会怎么样呢?
class foo(){
public :
int thread();
static void *wrapper(void *args){
foo *f=static_cast<foo *>(args);
f->thread();
return NULL;
}
}
int main(){
.........
foo *f=new foo();
pthread_create(&tid,&tattr,foo::wrapper,&f);
}
这样就比较规整了吧?
其他参考网页
http://www.ibm.com/developerworks/cn/linux/l-cn-mthreadps/index.html
http://www.cppblog.com/bigsml/archive/2006/09/07/12137.html
- c++builder 多线程问题
- C-多线程,冰淇淋问题
- c-多线程同步的问题
- C-多线程-哲学家进餐问题
- Linux C 多线程执行顺序问题
- Linux C 多线程执行顺序问题
- Linux C 多线程执行顺序问题
- Linux C 多线程执行顺序问题
- python多线程ctrl-c退出问题
- Linux C 多线程执行顺序问题
- 多线程(C++)临界区Critical Sections问题
- 关于c++/c#/java 多线程绘图问题说明
- C 多线程
- C 多线程
- C++:多线程
- c# 多线程
- C#---多线程
- 【C#】多线程
- 这些伤胃的坏习惯你有吗
- how to get the function back trace in php
- POJ 1321 棋盘问题
- java加密解密研究7、SHA算法家族
- NFC和物联网
- c++ 多线程问题
- 2012 广义货币M2统计以及预测
- jquery validate.js表单验证的基本用法入门
- 索引的rebuild和rebuild online的区别
- 画一个渐变色球,用内部类实现监听两个button
- 非关系型数据库NoSql之mongo
- 上帝能造出他自己都搬不动的石头吗?
- windowManager
- Java程序员从笨鸟到菜鸟之(七十七)细谈Hibernate(十九)Hibernate二级缓存详解