Ora10g How To Configure Server Side Transparent Application Failover [ID 460982.1]

记录一下： [ID 460982.1]

How To Configure Server Side Transparent Application Failover [ID 460982.1]转到底部
修改时间:2011-11-18类型:HOWTO状态:PUBLISHED优先级:3
注释 (0)


In this Document
  Goal
  Solution


Applies to:


Oracle Server - Enterprise Edition - Version: 10.2.0.1 and later   [Release: 10.2 and later ]
Information in this document applies to any platform.
Goal


How to configure Server Side Transparent Application Failover (TAF)?


Server side TAF settings override client-side counterparts that might be configured in TNS connect descriptors. If TAF is not configured on the client side, then at a minimum, the failover type must be set to enable TAF. If the failover type is set on the server side, then the failover method will default to BASIC. Delay and retries are optional and may be specified independently.


Solution


1. Create a service on the RAC cluster to setup for TAF. Example creates a service called server_taf to the database called rac, with instance names rac1 & rac2


srvctl add service -d rac -s server_taf -r "rac1,rac2" -P BASIC 
2. Start the service server_taf


srvctl start service -d rac -s server_taf
3. Check service is running


srvctl config service -d rac 


ractest PREF: rac1 rac2 AVAIL: 
server_taf PREF: rac1 rac2 AVAIL:
4. Find the service_id value for the service just created


sqlplus /nolog 
Connect / as sysdba 
SQL> select name,service_id from dba_services where name = 'server_taf'; 


NAME                                                             SERVICE_ID 
---------------------------------------------------------------- ---------- 
server_taf                                                                6  
5. Review the standard setup for the services


SQL>col name format a15  
col failover_method format a11 heading 'METHOD' 
col failover_type format a10 heading 'TYPE' 
col failover_retries format 9999999 heading 'RETRIES' 
col goal format a10 
col clb_goal format a8 
col AQ_HA_NOTIFICATIONS format a5 heading 'AQNOT' 


SQL>select name, failover_method, failover_type, failover_retries,goal, clb_goal,aq_ha_notifications  
from dba_services where service_id = 6 


NAME            METHOD      TYPE       RETRIES  GOAL       CLB_GOAL AQNOT 
--------------- ----------- ---------- -------- ---------- -------- ----- 
server_taf                                                 LONG     NO
Please note there is no values for method, type or retries. These are required todo server side TAF.
The cause of this problem has been identified and verified in an unpublished Bug 6886239 DBMS_SERVICE parameters are not added using srvctl add service. This is fixed in release 11.2 onwards.


6. Add the server side failover parameters to the service.


Server side TAF method is BASIC. BASIC is the only value currently supported. This means that a new connection is established at failure time. It is not possible to pre-establish a backup connection. (which is to say, PRECONNECT is not supported)
SQL> execute dbms_service.modify_service (service_name => 'server_taf' - 
, aq_ha_notifications => true - 
, failover_method => dbms_service.failover_method_basic - 
, failover_type => dbms_service.failover_type_select - 
, failover_retries => 180 - 
, failover_delay => 5 - 
, clb_goal => dbms_service.clb_goal_long); 


PL/SQL procedure successfully completed.
Addtional failover parameters value can be found in the Oracle? Database PL/SQL Packages and Types Reference 11g Release 1 (11.1), under section 116 DBMS_SERVICE


7. Check the service and we can now see values for Method, Type and Retries.


SQL>select name, failover_method, failover_type, failover_retries,goal, clb_goal,aq_ha_notifications  
from dba_services where service_id = 6 




NAME            METHOD      TYPE        RETRIES GOAL       CLB_GOAL AQNOT 
--------------- ----------- ---------- -------- ---------- -------- ----- 
server_taf      BASIC       SELECT          180 NONE       LONG     YES
8. Check the listener has the service registered.


lsnrctl services 


Service "server_taf.za.oracle.com" has 2 instance(s). 
  Instance "rac1", status READY, has 2 handler(s) for this service... 
    Handler(s): 
      "DEDICATED" established:0 refused:0 state:ready 
         REMOTE SERVER 
         (ADDRESS=(PROTOCOL=TCP)(HOST=dell01)(PORT=1521)) 
      "DEDICATED" established:0 refused:0 state:ready 
         LOCAL SERVER 
  Instance "rac2", status READY, has 1 handler(s) for this service... 
    Handler(s): 
      "DEDICATED" established:0 refused:0 state:ready 
         REMOTE SERVER 
         (ADDRESS=(PROTOCOL=TCP)(HOST=dell02)(PORT=1521))
9. Create a net service name. Here we have client load balancing between the two nodes.


SERVERTAF = 
  (DESCRIPTION = 
    (LOAD_BALANCE = yes) 
    (ADDRESS = (PROTOCOL = TCP)(HOST = dell01)(PORT = 1521)) 
    (ADDRESS = (PROTOCOL = TCP)(HOST = dell02)(PORT = 1521)) 
    (CONNECT_DATA = 
      (SERVICE_NAME = server_taf.za.oracle.com) 
    ) 
  )
10. Testing...


SQL*Plus: Release 10.2.0.1.0 - Production on Tue Oct 2 12:15:44 2007 


Copyright (c) 1982, 2005, Oracle.  All rights reserved. 




Connected to: 
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production 
With the Partitioning, Real Application Clusters, OLAP and Data Mining options 


SQL> select host_name,instance_name from v$instance; 


HOST_NAME 
---------------------------------------------------------------- 
INSTANCE_NAME 
---------------- 
dell02 
rac2 
11. Shutdown the database in the node the connection has routed to


SQL> select instance_name from V$instance; 


INSTANCE_NAME 
---------------- 
rac2 


SQL> shutdown abort; 
ORACLE instance shut down. 
12. TAF will now kick in


SQL> / 


HOST_NAME 
---------------------------------------------------------------- 
INSTANCE_NAME 
---------------- 
dell01 
rac1
Oracle Net client trace of sqlplus connection during failover shows :


Shows the calling net service name 


[02-OCT-2007 12:15:44:618] niotns: Calling address: (DESCRIPTION=(LOAD_BALANCE=yes)(ADDRESS=(PROTOCOL=TCP)(HOST=dell01)(PORT=1521)) 
(ADDRESS=(PROTOCOL=TCP)(HOST=dell02)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=server_taf.za.oracle.com) 
(CID=(PROGRAM=d:\oracle\102ee\bin\sqlplus.exe)(HOST=sflood-uk2)(USER=sflood)))) 


Selected node dell02 


[02-OCT-2007 12:15:44:648] nttbnd2addr: looking up IP addr for host: dell02 


Connection handshake 


[02-OCT-2007 12:15:44:878] nscon: sending NSPTCN packet 
[02-OCT-2007 12:15:45:229] nscon: got NSPTRS packet 
[02-OCT-2007 12:15:45:229] nscon: sending NSPTCN packet 
[02-OCT-2007 12:15:45:429] nscon: got NSPTAC packet 


The select running 


[02-OCT-2007 12:16:04:046] nspsend: 00 00 00 00 00 E8 64 0B |......d.| 
[02-OCT-2007 12:16:04:046] nspsend: 01 2E 73 65 6C 65 63 74 |..select| 
[02-OCT-2007 12:16:04:046] nspsend: 20 68 6F 73 74 5F 6E 61 |.host_na| 
[02-OCT-2007 12:16:04:046] nspsend: 6D 65 2C 69 6E 73 74 61 |me,insta| 
[02-OCT-2007 12:16:04:046] nspsend: 6E 63 65 5F 6E 61 6D 65 |nce_name| 
[02-OCT-2007 12:16:04:046] nspsend: 20 66 72 6F 6D 20 76 24 |.from.v$| 
[02-OCT-2007 12:16:04:046] nspsend: 69 6E 73 74 61 6E 63 65 |instance| 


Here the the time the instance was shutdown 


[02-OCT-2007 12:16:05:077] nioqrc: exit 
[02-OCT-2007 12:18:20:642] nioqsn: entry 


Select attempts to run again 


[02-OCT-2007 12:18:20:652] nspsend: 00 00 00 00 00 E8 64 0B |......d.| 
[02-OCT-2007 12:18:20:652] nspsend: 01 2E 73 65 6C 65 63 74 |..select| 
[02-OCT-2007 12:18:20:652] nspsend: 20 68 6F 73 74 5F 6E 61 |.host_na| 
[02-OCT-2007 12:18:20:652] nspsend: 6D 65 2C 69 6E 73 74 61 |me,insta| 
[02-OCT-2007 12:18:20:652] nspsend: 6E 63 65 5F 6E 61 6D 65 |nce_name| 
[02-OCT-2007 12:18:20:652] nspsend: 20 66 72 6F 6D 20 76 24 |.from.v$| 
[02-OCT-2007 12:18:20:652] nspsend: 69 6E 73 74 61 6E 63 65 |instance| 


Fails, due to instance was shutdown


[02-OCT-2007 12:18:20:652] nserror: nsres: id=0, op=68, ns=12537, ns2=12560; nt[0]=507, nt[1]=0, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0 
[02-OCT-2007 12:18:20:652] nsrdr: error exit 
[02-OCT-2007 12:18:20:652] nsdo: nsctxrnk=0 
[02-OCT-2007 12:18:20:652] nsdo: error exit 
[02-OCT-2007 12:18:20:652] nioqer: entry 
[02-OCT-2007 12:18:20:652] nioqer: incoming err = 12151 
[02-OCT-2007 12:18:20:652] nioqce: entry 
[02-OCT-2007 12:18:20:652] nioqce: exit 
[02-OCT-2007 12:18:20:652] nioqer: returning err = 3113 


TAF kicks in 


[02-OCT-2007 12:18:20:652] nsc2addr: (DESCRIPTION=(LOAD_BALANCE=yes)(ADDRESS=(PROTOCOL=TCP)(HOST=dell01)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=server_taf.za.oracle.com)(CID=(PROGRAM=d:\oracle\102ee\bin\sqlplus.exe)(HOST=sflood-uk2)(USER=sflood)))) 


Connection fails over to node dell01 


[02-OCT-2007 12:18:20:652] nttbnd2addr: looking up IP addr for host: dell01 


Connection handshake is completed 


[02-OCT-2007 12:18:20:863] nscon: sending NSPTCN packet 
[02-OCT-2007 12:18:23:547] nscon: got NSPTRS packet 
[02-OCT-2007 12:18:23:547] nscon: sending NSPTCN packet 
[02-OCT-2007 12:18:23:747] nscon: got NSPTAC packet 


Select is run 


[02-OCT-2007 12:18:47:861] nspsend: 00 00 00 00 00 E8 64 0B |......d.| 
[02-OCT-2007 12:18:47:861] nspsend: 01 2E 73 65 6C 65 63 74 |..select| 
[02-OCT-2007 12:18:47:861] nspsend: 20 68 6F 73 74 5F 6E 61 |.host_na| 
[02-OCT-2007 12:18:47:861] nspsend: 6D 65 2C 69 6E 73 74 61 |me,insta| 
[02-OCT-2007 12:18:47:861] nspsend: 6E 63 65 5F 6E 61 6D 65 |nce_name| 
[02-OCT-2007 12:18:47:861] nspsend: 20 66 72 6F 6D 20 76 24 |.from.v$| 
[02-OCT-2007 12:18:47:861] nspsend: 69 6E 73 74 61 6E 63 65 |instance|
 
相关内容
 
 
产品
 
Oracle Database Products > Oracle Database > Oracle Database > Oracle Server - Enterprise Edition > Real Application Cluster > RAC Manageability - SRVCTL, GSD, SRVCONFIG and GSDCTL
 

关键字

   

DBMS_SERVICE;FAILOVER;LOAD BALANCED;LOAD_BALANCE;ORACLE NET;TAF;TRANSPARENT APPLICATION FAILOVER