mysql5.6.11解压版安装

一、下载mysql5免安装版本

二、解压mysql5到任意目录

三、配置mysql5

my-small.ini：用于小型系统的配置文件，MYSQL运行内存小于等于64M；
my-medium.ini：用于中等系统的配置文件，MYSQL运行内存在32M - 64M之间；
my-large.ini：用于大型系统的配置文件，MYSQL运行内存在512M，该系统主要运行MYSQL数据库；
my-huge.ini：用于巨型系统的配置文件，MYSQL运行内存在1G-2G之间，该系统主要运行MYSQL数据库；
my-innodb-heavy-4G.ini：4G的RAM，只支持事务，很少连接数，很大的查询量。
我们只需要从中选择一种将其复制到桌面改名为my.ini文件，此文件就为MYSQL数据库默认的配置文件，将其剪切放在mysql-5.6.11目录下。

目录下新建一个my.ini，拷贝my-small.ini代码至my.ini；修改后如下(中文说明为添加部分)：
# Example MySQL config file for small systems.
#
# This is for a system with little memory (<= 64M) where MySQL is only used
# from time to time and it's important that the mysqld daemon
# doesn't use much resources.
#
# You can copy this file to
# /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is C:\mysql\data) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.

# The following options will be passed to all MySQL clients
[client]
#password = your_password

# The TCP/IP Port the MySQL Server will listen on
port = 3306 //端口
#socket = /tmp/mysql.sock
[mysql]

#设置mysql客户端的字符集
default-character-set=utf8   (gbk)


# Here follows entries for some specific programs

# The MySQL server
[mysqld]

# The TCP/IP Port the MySQL Server will listen on
port = 3306 //端口

#Path to installation directory. All paths are usually resolved relative to this.
# 设置mysql的安装目录
basedir=D:\\mysql-5.1.50
# 设置mysql数据库的数据的存放目录，必须是data，或者是\\xxx-data
datadir=D:\\mysql-5.1.50\\data

[WinMySQLadmin]
Server="E:\Program Files\MySQL\bin\mysqld.exe"

 

 

 

socket = /tmp/mysql.sock
skip-locking
key_buffer_size = 16K
max_allowed_packet = 1M
table_open_cache = 4
sort_buffer_size = 64K
read_buffer_size = 256K
read_rnd_buffer_size = 256K
net_buffer_length = 2K
thread_stack = 128K

#设置mysql服务器的字符集，默认编码

character_set_server = utf8

lower_case_table_names=2  //区分大小写
max_connections=1800    //连接数

#default-character-set=utf8
#default-collation=utf8_general_ci
#default-storage-engine=innodb//数据库引擎方式

 

# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (using the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking
server-id = 1

# Uncomment the following if you want to log updates
#log-bin=mysql-bin

# binary logging format - mixed recommended
#binlog_format=mixed

# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = C:\mysql\data/
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = C:\mysql\data/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 16M
#innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 5M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates

[myisamchk]
key_buffer_size = 8M
sort_buffer_size = 8M

[mysqlhotcopy]
interactive-timeout

//区分大小写
lower_case_table_names=2
四、然后编写启动脚本startup.bat

在D:\mysql-5.1.42\bin路径下编写startup.bat：
@echo off
echo start mysql5 on localhost
mysqld --install mysql5 --defaults-file=D:\mysql-5.1.42\my.ini //将服务注册到win服务中去
net start mysql5 //启动mysql
pause

注册服务用

mysqld --install mysql5 --defaults-file="C:\temp\TopSoft\service\mysql\my.ini"
或：mysqld-nt.exe --install mysql5 --defaults-file="..\my.ini"
五、停止脚本stop.bat

在D:\mysql-5.1.42\bin路径下编写stop.bat：
@echo off
echo stop mysql5
net stop mysql5
mysqld --remove mysql5
pause

 

删除服务：
mysqld-nt --remove mysql5
六、配置完毕后检查

双击D:\mysql-5.1.42\bin路径下的startup.bat批处理文件，在系统服务中有一个mysql5的服务，并且已经启动，然后测试下数据库的安装情况，在dos窗口下，进入D:\>cd D:\mysql-5.1.42\bin路径下，输入mysqlshow，即可显示数据库信息，
示例如下：
Microsoft Windows XP [版本 5.1.2600]
(C) 版权所有 1985-2001 Microsoft Corp.

C:\Documents and Settings\guoy>d:

D:\>cd D:\mysql-5.1.42\bin

D:\mysql-5.1.42\bin>mysqlshow
+--------------------+
|     Databases      |
+--------------------+
| information_schema |
| test               |
+--------------------+

D:\mysql-5.1.42\bin>

如上信息说明数据库安装成功还有其他测试命令：
mysqlshow -u root mysql
mysqladmin -u root version status proc

 

七、修改用户密码

登陆：
mysql -u root -p
输入密码即可

选择数据库：use mysql

修改密码：update user set Password=password('123456') where user='root';
flush privileges;

八、查看服务

：net start
启动服务：net start mysql5
停止服务：net stop mysql5

 

 

windows 7 64位下配置mysql64位免安装版
文章分类:数据库
1、官方网站下载mysql-noinstall-5.1.51-winx64.zip
2、解压到E:\Program Files\MySQL.（路径自己指定）
3、在E:\Program Files\MySQL下新建my.ini配置文件，内容如下：

*****************配置文件开始*********************

# MySQL Server Instance Configuration File
# ----------------------------------------------------------------------
# Generated by the MySQL Server Instance Configuration Wizard
#
#
# Installation Instructions
# ----------------------------------------------------------------------
#
#
# CLIENT SECTION
# ----------------------------------------------------------------------
#
# The following options will be read by MySQL client applications.
# Note that only client applications shipped by MySQL are guaranteed
# to read this section. If you want your own MySQL client program to
# honor these values, you need to specify it as an option during the
# MySQL client library initialization.
#
[client]

port=3306

[mysql]

default-character-set=gbk

# SERVER SECTION
# ----------------------------------------------------------------------
#
# The following options will be read by the MySQL Server. Make sure that
# you have installed the server correctly (see above) so it reads this
# file.
#
[mysqld]

# The TCP/IP Port the MySQL Server will listen on
port=3306

#Path to installation directory. All paths are usually resolved relative to this.
basedir="E:\Program Files\MySQL\"
#Path to the database root
datadir="E:\Program Files\MySQL\Data"
[WinMySQLadmin]
Server="E:\Program Files\MySQL\bin\mysqld.exe"

# The default character set that will be used when a new schema or table is
# created and no character set is defined
default-character-set=gbk

# The default storage engine that will be used when create new tables when
default-storage-engine=INNODB

# Set the SQL mode to strict
sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"

# The maximum amount of concurrent sessions the MySQL server will
# allow. One of these connections will be reserved for a user with
# SUPER privileges to allow the administrator to login even if the
# connection limit has been reached.
max_connections=100

# Query cache is used to cache SELECT results and later return them
# without actual executing the same query once again. Having the query
# cache enabled may result in significant speed improvements, if your
# have a lot of identical queries and rarely changing tables. See the
# "Qcache_lowmem_prunes" status variable to check if the current value
# is high enough for your load.
# Note: In case your tables change very often or if your queries are
# textually different every time, the query cache may result in a
# slowdown instead of a performance improvement.
query_cache_size=0

# The number of open tables for all threads. Increasing this value
# increases the number of file descriptors that mysqld requires.
# Therefore you have to make sure to set the amount of open files
# allowed to at least 4096 in the variable "open-files-limit" in
# section [mysqld_safe]
table_cache=256

# Maximum size for internal (in-memory) temporary tables. If a table
# grows larger than this value, it is automatically converted to disk
# based table This limitation is for a single table. There can be many
# of them.
tmp_table_size=26M

# How many threads we should keep in a cache for reuse. When a client
# disconnects, the client's threads are put in the cache if there aren't
# more than thread_cache_size threads from before.  This greatly reduces
# the amount of thread creations needed if you have a lot of new
# connections. (Normally this doesn't give a notable performance
# improvement if you have a good thread implementation.)
thread_cache_size=8

#*** MyISAM Specific options

# The maximum size of the temporary file MySQL is allowed to use while
# recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE.
# If the file-size would be bigger than this, the index will be created
# through the key cache (which is slower).
myisam_max_sort_file_size=100G

# If the temporary file used for fast index creation would be bigger
# than using the key cache by the amount specified here, then prefer the
# key cache method.  This is mainly used to force long character keys in
# large tables to use the slower key cache method to create the index.
myisam_sort_buffer_size=52M

# Size of the Key Buffer, used to cache index blocks for MyISAM tables.
# Do not set it larger than 30% of your available memory, as some memory
# is also required by the OS to cache rows. Even if you're not using
# MyISAM tables, you should still set it to 8-64M as it will also be
# used for internal temporary disk tables.
key_buffer_size=40M

# Size of the buffer used for doing full table scans of MyISAM tables.
# Allocated per thread, if a full scan is needed.
read_buffer_size=64K
read_rnd_buffer_size=256K

# This buffer is allocated when MySQL needs to rebuild the index in
# REPAIR, OPTIMZE, ALTER table statements as well as in LOAD DATA INFILE
# into an empty table. It is allocated per thread so be careful with
# large settings.
sort_buffer_size=256K

#*** INNODB Specific options ***
innodb_data_home_dir="E:\Program Files\MySQL\Data\INNODB\"

# Use this option if you have a MySQL server with InnoDB support enabled
# but you do not plan to use it. This will save memory and disk space
# and speed up some things.
#skip-innodb

# Additional memory pool that is used by InnoDB to store metadata
# information.  If InnoDB requires more memory for this purpose it will
# start to allocate it from the OS.  As this is fast enough on most
# recent operating systems, you normally do not need to change this
# value. SHOW INNODB STATUS will display the current amount used.
innodb_additional_mem_pool_size=2M

# If set to 1, InnoDB will flush (fsync) the transaction logs to the
# disk at each commit, which offers full ACID behavior. If you are
# willing to compromise this safety, and you are running small
# transactions, you may set this to 0 or 2 to reduce disk I/O to the
# logs. Value 0 means that the log is only written to the log file and
# the log file flushed to disk approximately once per second. Value 2
# means the log is written to the log file at each commit, but the log
# file is only flushed to disk approximately once per second.
innodb_flush_log_at_trx_commit=1

# The size of the buffer InnoDB uses for buffering log data. As soon as
# it is full, InnoDB will have to flush it to disk. As it is flushed
# once per second anyway, it does not make sense to have it very large
# (even with long transactions).
innodb_log_buffer_size=1M

# InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and
# row data. The bigger you set this the less disk I/O is needed to
# access data in tables. On a dedicated database server you may set this
# parameter up to 80% of the machine physical memory size. Do not set it
# too large, though, because competition of the physical memory may
# cause paging in the operating system.  Note that on 32bit systems you
# might be limited to 2-3.5G of user level memory per process, so do not
# set it too high.
innodb_buffer_pool_size=77M

# Size of each log file in a log group. You should set the combined size
# of log files to about 25%-100% of your buffer pool size to avoid
# unneeded buffer pool flush activity on log file overwrite. However,
# note that a larger logfile size will increase the time needed for the
# recovery process.
innodb_log_file_size=39M

# Number of threads allowed inside the InnoDB kernel. The optimal value
# depends highly on the application, hardware as well as the OS
# scheduler properties. A too high value may lead to thread thrashing.
innodb_thread_concurrency=8

*****************配置文件结束*********************

配置文件也放在了附件里，大家可以根据需要修改。

重点是以下配置，其中datadir的目录名称必须是data，并且好像必须是MySQL目录下的data.之前自己制定了其他目录，一直出现1067的错误。

#Path to installation directory. All paths are usually resolved relative to this.
basedir="E:\Program Files\MySQL\"

#Path to the database root
datadir="E:\Program Files\MySQL\Data"

4、在windows环境变量里加入以下内容（方便执行命令行命令）
新建MYSQL_HOME="E:\Program Files\MySQL\",
在Path里加入%MYSQL_HOME%\bin

5、将mysql注册为windows系统服务。具体操作是在命令行中执行以下命令：
mysqld install MySQL --defaults-file="E:\Program Files\MySQL\my.ini"

移除服务为 mysqld remove

6、第5步成功后，在命令行启动mysql
c:>net start mysql

7、修改root的密码为111111
    c:>mysql -uroot
    mysql> UPDATE user SET password=PASSWORD("111111") WHERE user='root';
　　mysql> FLUSH PRIVILEGES;
　　mysql> QUIT