Using Blender and Rigify
来源:互联网 发布:已备案的域名怎么转让 编辑:程序博客网 时间:2024/05/01 21:39
Using Blender and Rigify
Blender now comes with a free add-on called Rigify that provides your models with a biped rig that will work with Mecanim. This will prove very useful for new and casual game developers.
This guide shows you how to get your 3D model rigged with Rigify and imported into Unity 4's Mecanim. Rigify generates a full rig for your model and by using the armature as a template you will be able to forge it into a nice simple rig for humanoid characters. You should start by enabling Rigify within Blender so you can use its features. From there you will import your 3d model and begin to set up your model and armature correctly to avoid any problems later down the line. Once everything is set-up you can position the bones and generate your main rig. The trickiest part is skinning the mesh to the bones you wish to use and ensuring they are parented correctly, and finally (after some testing and polishing) you can import into it into Unity.
Here is what you will need:
- Unity 4.x
- Blender 2.64
- 3D Humanoid Model (MakeHuman is very useful if you need help with modelling).
Enable Rigify
First you need to ensure that the Rigify add-on has been installed and enabled within Blender:
- Go to File > User preferences.
- Select the Addons tab, and then scroll to the bottom and click the check box next to �Rigify�
- Click �Save as default�
This activates the add-on and allows you access to the buttons and features needed. Setting it to default will include it with all your future projects.
Setting up your Armature
Grab a basic humanoid rig that Rigify will use as a template. This rig is very basic but it allows Rigify to build itself around the relative bone positions.
- Go to Add > Armature (Human)
- Ensure both the armature and model are centred at 0,0,0
- If you scale or move the model make sure to reset the scale and/or translation values of both the armature and model.
- Go into edit mode (Press Tab)
- Begin positioning the bones in their respective place on the model
- Use �X-Ray� to allow yourself to see the bones through the model
- Once this is complete, go back into object mode.
- Move the armature to the side so it is out of the way.
(If you are using Make Human, you may want to join the many different meshes into one complete mesh. Do this by selecting all the meshes and pressing CTRL + J)
Generating your Rig
- While the armature is selected click the Object data tab on the far right.
- Under �Rigify Buttons� click Generate.
- Switch to Pose mode and do the following:
- Press the (A) key to select the rig and then press the (H) key to hide the unwanted layers.
- Shift click on the Armature layer below.This will reveal the deformation bones, the deformation bones are what you will need to skin and weight paint your mesh to.
Deleting WGT bones
You will notice in the top right corner in the scene's hierarchy you have many WGT-bones.
As these bones will not be skinned to the mesh or used at all, we will need to delete them to avoid having unassigned meshes in our Unity project. Right click on the bone and select "Delete". Do this for each WGT-bone in the scene.
Skinning the Rig to the Model
- Skin the model to the deformation bones.Before you start, make sure you are in object mode and select the mesh, then hold shift and select the rig, press Ctrl + P and select Armature deform > With Automatic weights.
This will assign the mesh to the bones creating vertex groups, this is what we will use for the skinning process.
(If you have little or no knowledge of skinning in blender click Here for a tutorial.)
Notice that the deformation bones will use two bones for each of the upper and lower limbs. Do not skin to the 2nd bone and ensure they are re-parented so that Mecanim will link them up correctly. - Skin your Shoulders to "DEF-shoulder.R" + "DEF-shoulder.L" and ensure their parent is "ORG-ribs"
- Skin your Upper arms to "DEF-upper_arm.R.01" + "DEF-upper_arm.L.01" and ensure their parent is "DEF-shoulder.R" or "DEF-shoulder.L" respectively.
- Skin your Forearms to "DEF-forearm.R.01" + "DEF-forearm.L.01" and ensure their parent is "DEF-upper_arm.R.01" or "DEF-upper_arm.L.01" respectively.
- Skin your thighs to DEF-thigh.R.01 + DEF-thigh.L.01 and ensure their parent bone is "ORG-hips".
- Skin your Shins to DEF-shin.R.01 + DEF-shin.L.01 and ensure their parent is "DEF-thigh.R.01" or "DEF-thigh.L.01" respectively.This will provide you with a rig that is skinned to the bones shown without an X through them. The spare bones should not be skinned to anything!Do the same thing to the hands, just remember Mecanim will only take the hand bone and three bones for each finger and thumb. This means you skin the model's hands to the bones without crosses through them as shown in the picture below.
- In the same way the hand must be parented to the correct bones. Skin your Hands to "DEF-hand.R" + "DEF-hand.L" and ensure their parent is "DEF-forearm.R.01" or "DEF-forearm.L.01" respectively.For each finger and thumb you will be using the following (left hand as an example):
- Thumb: "DEF-thumb.01.L.02", "DEF-thumb.02.L", "DEF-thumb.03.L"
- Index: "DEF-finger_index.01.L.02", "DEF-finger_index.02.L", "DEF-finger_index.03.L"
- Middle: "DEF-finger_middle.01.L.02", "DEF-finger_middle.02.L", "DEF-finger_middle.03.L"
- Ring: "DEF-finger_ring.01.L.02", "DEF-finger_ring.02.L", "DEF-finger_ring.03.L"
- Pinky: "DEF-finger_pinky.01.L.02", "DEF-finger_pinky.02.L", "DEF-finger_pinky.03.L"
Export and Import
Export the model as a .fbx and place it in a folder separate from your project. file > Export > AutoDesk FBX (.fbx) > Export. Once this is done you can begin to import it into Unity and get it linked up to Mecanim.
- Open Unity 4 and create a new project called "Rigify Test" once it is open, simply drag and drop your model into the project window.
- Select the model's prefab in the project window and click Rig in the inspector. Change Animation Type to Humanoid and click Configure.All the bones should now link up nicely into Mecanim.
- Ensure all bones are in the right places and that there are no errors.\\
Page last updated: 2013-03-27
- Using Blender and Rigify
- Blender
- Blender
- Blender 3D Architecture, Buildings, and Scenery
- Using Data and Variables
- using zf and smarty
- Using threads and ProgressDialog
- Using Repo and Git
- Using libavformat and libavcodec
- Using libavformat and libavcodec
- Installing and Using Ftrace
- Using libavformat and libavcodec
- Making And Using Library
- Using and Creating Builds
- Using ReiserFS and Linux
- using git and repo
- Using libavformat and libavcodec
- Using SLF4J and Logback
- opencv 删除二值化图像中面积较小的连通域
- Asp.Net 导出数据格式为Excel 数据的9种方案
- OCP-1Z0-051-V9.02-15题
- ping, ping6 (icmp, icmpv6)
- 来混CSDN!
- Using Blender and Rigify
- android 自定义Dialog背景透明及显示位置设置
- .Net MVC4 被坑心得 (八) 缓存,弹出提示
- python与其他语言相比有什么优势?
- 旧诗3
- phpcms v9 标签含义整理
- thinkphp 数据分表
- Android双向滑动菜单完全解析,教你如何一分钟实现双向滑动特效
- 关于轮廓的各种使用