Multi Range Read (MRR) in MySQL 5.6 and MariaDB 5.5

March 21, 2012 ByOvais Tariq10 Comments

Tweet

inShare3

This is the second blog post in the series of blog posts leading up to the talk comparing the optimizer enhancements in MySQL 5.6 and MariaDB 5.5. This blog post is aimed at the optimizer enhancement Multi Range Read (MRR). Its available in both MySQL 5.6 and MariaDB 5.5

Now let’s take a look at what this optimization actually is and what benefits it brings.

Multi Range Read

With traditional secondary index lookups, if the columns that are being fetched do not belong to the secondary index definition (and hence covering index optimization is not used), then primary key lookups have to be performed for each secondary key entry fetched. This means that secondary key lookups for column values that do not belong to the secondary index definition can result in a lot of Random I/O. The purpose of MRR is to reduce this Random I/O and make it more sequential, by having a buffer in between where secondary key tuples are buffered and then sorted by the primary key values, and then instead of point primary key lookups, a range lookup is performed on the primary key by using the sorted primary key values.

Let me give you a simple example. Suppose you have the following query executed on the InnoDB table:

Shell

SELECT non_key_column FROM tbl WHERE key_column=x

1

SELECTnon_key_column FROM tbl WHERE key_column=x

This query will roughly be evaluated in following steps, without MRR:

1. SELECT key_column, pk_column FROM tbl WHERE key_column=x ORDER BY key_column
   (Note that secondary keys in InnoDB contain primary key columns)
2. For each pk_column value in step 1 do:
   SELECT non_key_column FROM tbl WHERE pk_column=val

As you can see that the values returned from Step 1 are sorted by the secondary key column ‘key_column’, and then for each value of ‘pk_column’ which is a part of the secondary key tuple, a point primary key lookup is made against base table, the number of these point primary key lookups will be depend on the number of rows that match the condition ‘key_column=x’. You can see that there are a lot of random primary key lookups made.

With MRR, then steps above are changed to the following:

1. SELECT key_column, pk_column FROM tbl WHERE key_column=x ORDER BY key_column
   (Note that secondary keys in InnoDB contain primary key columns)
2. Buffer each pk_column value fetched from step 1, and when the buffer is full sort them by pk_column, and do a range primary key lookup as follows:
   SELECT non_key_column from tbl WHERE pk_column IN (…)

As you can see by utilizing the buffer for sorting the secondary key tuples by pk_column, we have converted a lot of point primary key lookups to one or more range primary key lookup. Thereby, converting Random access to one or more sequential access. There is one another interesting thing that has come up here, and that is the importance of the size of the buffer used for sorting the secondary key tuples. If the buffer size is large enough only a single range lookup will be needed, however if the buffer size is small as compared to the combined size of the secondary key tuples fetched, then the number of range lookups will be:

Shell

CEIL(S/N)where,S is the combined size of the secondary key tuples fetched, andN is the buffer size.

1

2

3

4

CEIL(S/N)

where,

Sis thecombined size of the secondarykey tuples fetched,and

N isthe buffer size.

In MySQL 5.6 the buffer size used by MRR can be controlled by the variable read_rnd_buffer_size, while MariaDB introduces a different variable to control the MRR buffer sizemrr_buffer_size. Both buffer sizes default to 256K in MySQL 5.6 and MariaDB 5.5 respectively, which might be low depending on your scenario.

You can read more about the MRR optimization available in MySQL 5.6 here:
http://dev.mysql.com/doc/refman/5.6/en/mrr-optimization.html
and as available in MariaDB 5.5 here:
http://kb.askmonty.org/en/multi-range-read-optimization

Now let’s move on to the benchmarks, to see the difference in numbers.

Benchmark results

For the purpose of this benchmark, I have used TPC-H Query #10 and ran it on TPC-H dataset (InnoDB tables) with aScale Factor of 2 (InnoDB dataset size ~5G). I did not use Scale Factor of 40 (InnoDB dataset size ~95G), because the query was taking far too long to execute, ~11 hours in case of MySQL 5.5 and ~5 hours in case of MySQL 5.6 and MariaDB 5.5. Note that query cache is disabled during these benchmark runs and that the disks are 4 5.4K disks in Software RAID5.

Also note that the following changes were made in the MySQL config:
optimizer_switch=’index_condition_pushdown=off’
optimizer_switch=’mrr=on’
optimizer_switch=’mrr_sort_keys=on’ (only on MariaDB 5.5)
optimizer_switch=’mrr_cost_based=off’
read_rnd_buffer_size=4M (only on MySQL 5.6)
mrr_buffer_size=4M (only on MariaDB 5.5)

We have turned off ICP optimization for the purpose of this particular benchmark, because we want to see the individual affect of an optimization (where possible). Also note that we have turned off mrr_cost_based, this is because the cost based algorithm used to calculate the cost of MRR when the optimizer is choosing the query execution plan, is not sufficiently tuned and it is recommended to turn this off.

The query used is:

Shell

select c_custkey, c_name, sum(l_extendedprice * (1 - l_discount)) as revenue, c_acctbal, n_name, c_address, c_phone, c_commentfrom customer, orders, lineitem, nationwhere c_custkey = o_custkey and l_orderkey = o_orderkey and o_orderdate >= '1993-08-01' and o_orderdate < date_add( '1993-08-01' ,interval '3' month) and l_returnflag = 'R' and c_nationkey = n_nationkeygroup by c_custkey, c_name, c_acctbal, c_phone, n_name, c_address, c_commentorder by revenue descLIMIT 20;

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

select

        c_custkey,

        c_name,

        sum(l_extendedprice* (1- l_discount))as revenue,

        c_acctbal,

        n_name,

        c_address,

        c_phone,

        c_comment

from

        customer,

        orders,

        lineitem,

        nation

where

        c_custkey= o_custkey

        andl_orderkey =o_orderkey

        ando_orderdate >='1993-08-01'

        ando_orderdate <date_add('1993-08-01' ,interval'3' month)

        andl_returnflag ='R'

        andc_nationkey =n_nationkey

group by

        c_custkey,

        c_name,

        c_acctbal,

        c_phone,

        n_name,

        c_address,

        c_comment

order by

        revenuedesc

LIMIT 20;

In-memory workload

Now let’s see how effective is MRR when the workload fits entirely in memory. For the purpose of benchmarking in-memory workload, the InnoDB buffer pool size is set to 6G and the buffer pool was warmed up, so that the relevant pages were already loaded in the buffer pool. Note that as mentioned at the start of the benchmark results section, the InnoDB dataset size is ~5G. Ok so now let’s take a look at the graph:

MRR doesn’t really make any positive difference to the query times for MySQL 5.6, when the workload fits entirely in memory, because there is no extra cost for memory access at random locations versus memory access at sequential locations. In fact there is extra cost added by the buffering step introduced by MRR, and hence, there is a slight increase in query time for MySQL 5.6, increase of 0.02s. But the query times for MariaDB 5.5 are greater than both MySQL 5.5 and MySQL 5.6

IO bound workload

Now let’s see how effective is MRR when the workload is IO bound. For the purpose of benchmarking IO bound workload, the InnoDB buffer pool size is set to 1G and the buffer pool was not warmed up, so that it does not have the relevant pages loaded up already:

MRR does make a lot of difference when the workload is IO bound, the query time is decreased from ~11min to under a minute. The query time is reduced further when the buffer size is set to 4M. Note also that query time for MariaDB is still a little higher by a couple of seconds, when compared to MySQL 5.6.

Now let’s take a look at the status counters.

MySQL Status Counters

These status counters were captured when performing the benchmark on IO bound workload, mentioned above.

Counter NameMySQL 5.5MySQL 5.6MySQL 5.6 w/ read_rnd_bufer_size=4MMariaDB 5.5MariaDB 5.5 w/ mrr_buffer_size=4MCreated_tmp_disk_tables11111Created_tmp_tables11111Handler_mrr_initN/A0011Handler_mrr_rowid_refillsN/AN/AN/A10Handler_read_key508833623738622184508913507516Handler_read_next574320574320572889574320572889Handler_read_rnd_next136077136094136366136163136435Innodb_buffer_pool_read_ahead020920236692092023734Innodb_buffer_pool_read_requests13618511264739123547212632901235781Innodb_buffer_pool_reads1205481029487688210267276832Innodb_data_read1.84G1.89G1.53G1.89G1.53GInnodb_data_reads12055212387210055110301177213Innodb_pages_read120548123868100551123592100566Innodb_rows_read799239914146912318914146912318Select_scan11111Sort_scan11111

• As you can see from the status counters above that both MySQL 5.6 and MariaDB 5.5 are reporting high numbers forInnodb_buffer_pool_read_ahead which shows that the access pattern was sequential and hence InnoDB decided to do read_ahead, while in MySQL 5.5 no read_ahead was done because the access pattern was not sequential. Another thing to note is that more read_ahead is done when the buffer size used by MRR, is set to 4M, which obviously means that the more index tuples that can fit in the buffer the more sequential the access pattern will be.
• There is one MRR related variable introduced in MySQL 5.6 and MariaDB 5.5 Handler_mrr_init and another additional one introduced in MariaDB 5.5 Handler_mrr_rowid_refills. Handler_mrr_init is incremented when a MRR range scan is performed, but we can see its only incremented in MariaDB 5.5 and not in MySQL 5.6, is that because of a bug in MySQL 5.6 code? As MRR was used in both MySQL 5.6 and MariaDB 5.5. Handler_mrr_rowid_refills counts how many times the buffer used by MRR had to be reinitialized, because the buffer was small and not all index tuples could fit in the buffer. If this is > 0 then it means Handler_mrr_rowid_refills + 1 MRR range scans had to be performed. As in the table above you can with default buffer size of 256K, MariaDB 5.5 shows that Handler_mrr_rowid_refills = 1, which means the buffer is small and there were 2 MRR range scans needed. But with a buffer size of 4M, we can see that Handler_mrr_rowid_refills = 0, which means that the buffer was big enough and only 1 MRR range scan was needed, which is as efficient as it can be. This is also evident in the query times, which is lower by a couple of seconds when buffer size of 4M is used.
• Another interesting thing to note is that MySQL 5.6 and MariaDB 5.5 are both reading more rows than MySQL 5.5, as can be seen by the numbers reported for the status counterInnodb_rows_read. While MySQL 5.6 is also reporting increased numbers for the counterHandler_read_key. This is because of how status counter values are incremented when index lookup is performed. As I explained at the start of the post that traditional index lookup (for non-index-only columns) involves, reading an index record, and then using the PK column value in the index record to make a lookup in the PK. Both these lookups are performed in a single call to the storage engine and the countersHandler_read_key and Innodb_rows_read are incremented by ONE. However, when MRR is used then there are two separate calls made to the storage engine to perform the index record read and then to perform the MRR range scan on the PK. This causes the counters Handler_read_key and Innodb_rows_read to be incremented by TWO. It does not actually mean that queries with MRR are performing badly. The interesting thing is that though both MariaDB and MySQL 5.6 are reporting high numbers for Innodb_rows_read, which is completely in line with how the counters behave with MRR, but the value for counter Handler_read_key is more or less the same for MariaDB 5.5 when compared to MySQL 5.5, and this does not make sense to me. Probably its due to a bug in how counter is calculated inside MariaDB?

Other Observations

Sometimes both for MariaDB 5.5 and MySQL 5.6, the optimizer chooses the wrong query execution plan. Let’s take a look at what are the good and bad query execution plans.

a. Bad Plan

Shell

id select_type table type possible_keys key key_len ref rows filtered Extra1 SIMPLE nation ALL PRIMARY NULL NULL NULL 25 100.00 Using temporary; Using filesort1 SIMPLE customer ref PRIMARY,i_c_nationkey i_c_nationkey 5 dbt3.nation.n_nationkey 2123 100.001 SIMPLE orders ref PRIMARY,i_o_orderdate,i_o_custkey i_o_custkey 5 dbt3.customer.c_custkey 7 100.00 Using where1 SIMPLE lineitem ref PRIMARY,i_l_orderkey,i_l_orderkey_quantity PRIMARY 4 dbt3.orders.o_orderkey 1 100.00 Using where

1

2

3

4

5

id      select_type    table   type    possible_keys  key     key_len ref     rows    filtered        Extra

1       SIMPLE  nation  ALL    PRIMARY NULL    NULL    NULL    25      100.00  Usingtemporary;Using filesort

1      SIMPLE  customer        ref    PRIMARY,i_c_nationkey  i_c_nationkey   5       dbt3.nation.n_nationkey2123    100.00  

1       SIMPLE  orders  ref    PRIMARY,i_o_orderdate,i_o_custkey      i_o_custkey     5       dbt3.customer.c_custkey7       100.00  Usingwhere

1      SIMPLE  lineitem        ref    PRIMARY,i_l_orderkey,i_l_orderkey_quantity      PRIMARY4       dbt3.orders.o_orderkey  1      100.00  Usingwhere

b. Good Plan

Shell

id select_type table type possible_keys key key_len ref rows filtered Extra1 SIMPLE orders range PRIMARY,i_o_orderdate,i_o_custkey i_o_orderdate 4 NULL 232722 100.00 Using where; Rowid-ordered scan; Using temporary; Using filesort1 SIMPLE customer eq_ref PRIMARY,i_c_nationkey PRIMARY 4 dbt3.orders.o_custkey 1 100.00 Using where1 SIMPLE nation eq_ref PRIMARY PRIMARY 4 dbt3.customer.c_nationkey 1 100.001 SIMPLE lineitem ref PRIMARY,i_l_orderkey,i_l_orderkey_quantity PRIMARY 4 dbt3.orders.o_orderkey 2 100.00 Using where

1

2

3

4

5

id      select_type    table   type    possible_keys  key     key_len ref     rows    filtered        Extra

1       SIMPLE  orders  range  PRIMARY,i_o_orderdate,i_o_custkey      i_o_orderdate   4       NULL    232722  100.00  Usingwhere;Rowid-orderedscan;Using temporary;Using filesort

1      SIMPLE  customer        eq_ref  PRIMARY,i_c_nationkey  PRIMARY 4      dbt3.orders.o_custkey  1       100.00  Usingwhere

1       SIMPLE  nation  eq_ref  PRIMARYPRIMARY 4      dbt3.customer.c_nationkey      1       100.00  

1      SIMPLE  lineitem        ref    PRIMARY,i_l_orderkey,i_l_orderkey_quantity      PRIMARY4       dbt3.orders.o_orderkey  2      100.00  Usingwhere

So during cold query runs the optimizer would switch to using plan ‘a’, which does not involve MRR, and the query time for MySQL 5.6 and MariaDB 5.5 jumps to ~11min (this is the query time for MySQL 5.5) While when it sticks to plan ‘b’ for MySQL 5.6 and MariaDB 5.5, then query times remain under a minute. So when the correct query execution plan is not used, there is no difference in query times between MySQL 5.5 and MySQL 5.6/MariaDB 5.5 This is another area of improvement in the optimizer, as it is clearly a part of the optimizer’s job to select the best query execution plan. I had noted a similar thing when benchmarking ICP, the optimizer made a wrong choice. It looks like that there is still improvement and changes needed in the optimizer’s cost estimation algorithm.

MariaDB 5.5 expands the concept of MRR to improve the performance of secondary key lookups as well. But this works only with joins and specifically with Block Access Join Algorithms. So I am not going to cover it here, but will cover it in my next post which will be on Block Access Join Algorithms.

Conclusion

There is a huge speedup when the workload is IO bound, the query time goes down from ~11min to under a minute. The query time is reduced further when buffer size is set large enough so that the index tuples fit in the buffer. But there is no performance improvement when the workload is in-memory, in fact MRR adds extra sorting overhead which means that the queries are just a bit slower as compared to MySQL 5.5 MRR clearly changes the access pattern to sequential, and hence InnoDB is able to do many read_aheads. Another thing to take away is that MariaDB is just a bit slower as compared to MySQL 5.6, may be something for the MariaDB guys to look at.