Linux 平台下 MySQL 5.5 安装 说明 与 示例

一.下载说明

前期的一些准备说明，参考：

MySQL 发展史

http://blog.csdn.net/tianlesoftware/article/details/6999245

 

Mysql 不同版本 说明

http://blog.csdn.net/tianlesoftware/article/details/6723117

MySQL 分为Community Server 和 Enterprise Edition。 其中Community Server 可以直接从mysql 的官网下载。Enterprice Edition 只能从Oracle edelivery上下载，不过Edelivery 现在已经屏蔽了中国的IP，如果国内的用户一般不能从edelivery上下载，需要翻墙出去才能下载。

 

1.1 官方文档上有关MySQL安装文件类型说明：

       http://dev.mysql.com/doc/refman/5.5/en/index.html

 

Linux supports anumber of different solutions for installing MySQL. The recommended method isto use one of the distributions from Oracle. If you choose this method, thereare three options available:

（1）Installingfrom a generic binary package in .tar.gz format. See Section 2.2,“Installing MySQL from Generic Binaries on Unix/Linux” for moreinformation.

（2）Extractingand compiling MySQL from a source distribution. For detailed instructions,see Section 2.9, “InstallingMySQL from Source”.

（3）Installingusing a pre-compiled RPM package. For more information on using the RPMsolution, see Section 2.5.1,“Installing MySQL from RPM Packages on Linux”.

       --这里讲了3种方式来安装MySQL数据库，我这里用最简单的RPM 包来安装。

 

As analternative, you can use the native package manager within your Linuxdistribution to automatically download and install MySQL for you. Nativepackage installations can take of the download and dependencies required to runMySQL, but the MySQL version will often be some way behind the currentlyavailable release. You will also normally be unable to install developmentalreleases, as these are not usually made available in the native repository. Formore information on using the native package installers, see Section 2.5.2,“Installing MySQL on Linux using Native Package Manager”.

 

Note

For many Linux installations,you will want to set up MySQL to be started automatically when your machinestarts. Many of the native package installations perform this operation foryou, but for source, binary and RPM solutions you may need to set this upseparately. The required script, mysql.server,can be found in the support-filesdirectory under the MySQL installationdirectory or in a MySQL source tree. You can install itas/etc/init.d/mysql for automatic MySQL startup and shutdown. See Section 2.10.1.2,“Starting and Stopping MySQL Automatically”.

       --这里要注意一个问题，就是设置MySQL的自启动。 如果使用native package来安装，会自动设置为自启动，如果使用其他的方式，如source，binary和RPM，就需要单独的来设置自启动。

 

1.2 下载安装包

       我这里下载Community Server 版的，Enterprise Edition版的请到Oracle E-Delivery上下载。Enterprise Edition 有30天的试用期。

   Community Server下载地址：http://www.mysql.com/downloads/mysql/

 

 

这里要注意的，MySQL的Tar 包还是比较大，要比RPM包大3倍左右。

 

MySQL 的RPM 包有如下几个：

 

看一下每个rpm 包具体的描述：

（1）MySQL-server-VERSION.glibc23.i386.rpm

The MySQLserver. You need this unless you only want to connect to a MySQL server runningon another machine.

 

（2）MySQL-client-VERSION.glibc23.i386.rpm

The standardMySQL client programs. You probably always want to install this package.

 

（3）MySQL-devel-VERSION.glibc23.i386.rpm

The librariesand include files that are needed if you want to compile other MySQL clients,such as the Perl modules.

 

（4）MySQL-debuginfo-VERSION.glibc23.i386.rpm

This packagecontains debugging information. debuginfo RPMs are never needed touse MySQL software; this is true both for the server and for client programs.However, they contain additional information that might be needed by a debuggerto analyze a crash.

 

（5）MySQL-shared-VERSION.glibc23.i386.rpm

This packagecontains the shared libraries (libmysqlclient.so*) that certain languages andapplications need to dynamically load and use MySQL. It containssingle-threaded and thread-safe libraries. Prior toMySQL 5.5.6, if you install this package, do not installthe MySQL-shared-compat package.

 

（6）MySQL-shared-compat-VERSION.glibc23.i386.rpm

This packageincludes the shared libraries for MySQL 3.23, 4.0, and so on. It containssingle-threaded and thread-safe libraries. Install this package if you have applicationsinstalled that are dynamically linked against older versions of MySQL but youwant to upgrade to the current version without breaking the librarydependencies. Before MySQL 5.5.6, MySQL-shared-compat also includesthe libraries for the current release, so if you install it, you should notalso install MySQL-shared. As of 5.5.6, MySQL-shared-compat doesnot include the current library version, so there is no conflict.

 

（7）MySQL-embedded-VERSION.glibc23.i386.rpm

The embeddedMySQL server library.

 

（8）MySQL-test-VERSION.glibc23.i386.rpm

This packageincludes the MySQL test suite.

 

（9）MySQL-VERSION.src.rpm

This containsthe source code for all of the previous packages. It can also be used torebuild the RPMs on other architectures (for example, Alpha or SPARC).

 

二. 安装MySQL

2.1 安装说明

（1）MySQL的安装包有很多个，作用也不同，在大多数情况下，只需要安装MySQL-server 和 MySQL-client，其他的包根据需要来安装。

 

（2）The server RPM places data underthe /var/lib/mysql directory. The RPM also creates a login accountfor a user named mysql (if one does not exist) to use for running theMySQL server, and creates the appropriate entries in /etc/init.d/ tostart the server automatically at boot time. (This means that if you haveperformed a previous installation and have made changes to its startup script,you may want to make a copy of the script so that you do not lose it when youinstall a newer RPM.) 

 

（3）During RPM installation, a usernamed mysql and a group named mysql are created on thesystem. This is done using the useradd, groupadd,and usermod commands. Those commands require appropriateadministrative privileges, which is required for locally managed users andgroups (as listed in the /etc/passwd and /etc/groupfiles) by theRPM installation process being run by root.

       --在MySQL 安装时，会创建mysql 用户和mysql组。

 

（4）MySQL 的相关目录说明

/usr/bin ：Client programs and scripts    -- mysqladmin mysqldump等命令

/usr/sbin：　The mysqld server

/var/lib/mysql：Log files, databases  --这个目录就是数据库的目录

/usr/share/info：Manual in Info format

/usr/share/man：Unix manual pages

/usr/include/mysql：Include (header) files

/usr/lib/mysql：Libraries

/usr/share/mysql　：　Miscellaneous support files,including error messages, character set files, sample configuration files, SQLfor database installation

               --mysql.server命令及配置文件

/usr/share/sql-bench：　Benchmarks

/etc/rc.d/init.d/: 启动脚本文件mysql的目录

 

2.2 安装

--安装Server端：

[root@rac2 software]# ls

MySQL-client-5.5.15-1.rhel5.x86_64.rpm

MySQL-devel-5.5.15-1.rhel5.x86_64.rpm

MySQL-embedded-5.5.15-1.rhel5.x86_64.rpm

MySQL-server-5.5.15-1.rhel5.x86_64.rpm

MySQL-shared-5.5.15-1.rhel5.x86_64.rpm

MySQL-shared-compat-5.5.15-1.rhel5.x86_64.rpm

MySQL-test-5.5.15-1.rhel5.x86_64.rpm

 

[root@rac2 software]# rpm -ivh MySQL-server-5.5.15-1.rhel5.x86_64.rpm

Preparing...               ########################################### [100%]

  1:MySQL-server          ########################################### [100%]

 

PLEASE REMEMBER TO SET A PASSWORD FOR THEMySQL root USER !

To do so, start the server, then issue thefollowing commands:

 

/usr/bin/mysqladmin -u root password'new-password'

/usr/bin/mysqladmin -u root -h rac2password 'new-password'

 

Alternatively you can run:

/usr/bin/mysql_secure_installation

 

which will also give you the option ofremoving the test

databases and anonymous user created bydefault.  This is

strongly recommended for productionservers.

 

See the manual for more instructions.

 

Please report any problems with the /usr/bin/mysqlbugscript!

 

[root@rac2 software]#

 

--- 安装客户端

[root@rac2 software]# rpm -ivh MySQL-client-5.5.15-1.rhel5.x86_64.rpm

Preparing...               ########################################### [100%]

  1:MySQL-client           ###########################################[100%]

 

2.3 其他操作

2.3.1 查看在时创建的mysql用户和mysql group：

[root@rac2 bin]# cat /etc/passwd|grep mysql

mysql:x:103:106:MySQLserver:/var/lib/mysql:/bin/bash

[root@rac2 bin]# cat /etc/group | grepmysql

mysql:x:106:

 

2.3.2 修改密码

--连接MySQL 报错：

[root@rac2 software]# mysql

ERROR 2002 (HY000): Can't connect to localMySQL server through socket '/var/lib/mysql/mysql.sock' (2)

 

--启动MySQL 后，在连正常：

[root@rac2 ~]# /etc/init.d/mysql start

Starting MySQL...                                          [  OK  ]

[root@rac2 init.d]# mysql

Welcome to the MySQL monitor.  Commands end with ; or \g.

Your MySQL connection id is 1

Server version: 5.5.15 MySQL CommunityServer (GPL)

 

Copyright (c) 2000, 2010, Oracle and/or itsaffiliates. All rights reserved.

 

Oracle is a registered trademark of OracleCorporation and/or its

affiliates. Other names may be trademarksof their respective

owners.

 

Type 'help;' or '\h' for help. Type '\c' toclear the current input statement.

 

mysql>

--注意这里，因为MySQL默认没有密码，所以这里我们没有输入密码就直接连上了。

 

--修改密码，这个是安装Server 中提示的：

[root@rac2 ~]# /usr/bin/mysqladmin -u root password root

[root@rac2 ~]# mysql

ERROR 1045 (28000): Access denied for user'root'@'localhost' (using password: NO)

--修改密码之后，就提示要使用密码了。

 

[root@rac2 ~]# mysql -u root -p

Enter password:

Welcome to the MySQL monitor.  Commands end with ; or \g.

Your MySQL connection id is 5

Server version: 5.5.15 MySQL CommunityServer (GPL)

 

Copyright (c) 2000, 2010, Oracle and/or itsaffiliates. All rights reserved.

 

Oracle is a registered trademark of OracleCorporation and/or its affiliates. Other names may be trademarks of theirrespective owners.

 

Type 'help;' or '\h' for help. Type '\c' toclear the current input statement.

 

mysql>

--输入密码后成功连接。

 

 

2.3.3 查看MySQL端口 3306， 这个是默认端口：

[root@rac2 ~]# netstat -nat|grep 3306

tcp       0      0 192.168.3.100:32842         192.168.3.100:3306          TIME_WAIT  

tcp       0      0 :::3306                     :::*                        LISTEN     

 

2.3.4 设置开机自启动

--查看MySQL 开机自启动设置：

[root@rac2 ~]# chkconfig --list |grep mysql

mysql           0:off   1:off  2:on    3:on    4:on   5:on    6:off

这里的数字分别代表Linux启动的不同模式，3是命令行，5是窗口。

 

--关闭开机自启动

[root@rac2 ~]# chkconfig mysql off

[root@rac2 ~]# chkconfig --list |grep mysql

mysql          0:off   1:off  2:off   3:off   4:off  5:off   6:off

 

--启用开机自启动：

[root@rac2 ~]# chkconfig mysql on

[root@rac2 ~]# chkconfig --list |grep mysql

mysql           0:off   1:off  2:on    3:on    4:on   5:on    6:off

[root@rac2 ~]#

 

--将Mysql 从chkconfig服务里删除：

[root@rac2 ~]# chkconfig --del mysql

[root@rac2 ~]# chkconfig --list |grep mysql

 

--将Mysql 添加到chkconfig里：

[root@rac2 ~]# chkconfig --add mysql      

[root@rac2 ~]# chkconfig --list |grep mysql

mysql           0:off   1:off  2:on    3:on    4:on   5:on    6:off

 

2.4 数据库操作

[root@rac2 ~]# mysql -u root -p

Enter password:

Welcome to the MySQL monitor.  Commands end with ; or \g.

Your MySQL connection id is 6

Server version: 5.5.15 MySQL CommunityServer (GPL)

 

Copyright (c) 2000, 2010, Oracle and/or itsaffiliates. All rights reserved.

 

Oracle is a registered trademark of OracleCorporation and/or its

affiliates. Other names may be trademarksof their respective

owners.

 

Type 'help;' or '\h' for help. Type '\c' toclear the current input statement.

 

--查看已经存在的数据库，这几个是安装时自动创建的

mysql> show databases;

+--------------------+

| Database           |

+--------------------+

| information_schema |

| mysql              |

| performance_schema |

| test               |

+--------------------+

4 rows in set (0.00 sec)

 

--使用mysql 数据库

mysql> use mysql

Reading table information for completion oftable and column names

You can turn off this feature to get aquicker startup with -A

 

Database changed

 

--查看mysql 数据库下面的表

mysql> show tables;

+---------------------------+

| Tables_in_mysql           |

+---------------------------+

| columns_priv              |

| db                        |

| event                     |

| func                      |

| general_log               |

| help_category             |

| help_keyword              |

| help_relation             |

| help_topic                |

| host                      |

| ndb_binlog_index          |

| plugin                    |

| proc                      |

| procs_priv                |

| proxies_priv              |

| servers                   |

| slow_log                  |

| tables_priv               |

| time_zone                 |

| time_zone_leap_second     |

| time_zone_name            |

| time_zone_transition      |

| time_zone_transition_type |

| user                      |

+---------------------------+

24 rows in set (0.01 sec)

 

--创建数据库Dave

mysql> create database dave;

Query OK, 1 row affected (0.01 sec)

 

--在dave 数据库下面创建dave表：

mysql> use dave;

Database changed

mysql> create table dave(id int,namechar(20));

Query OK, 0 rows affected (0.01 sec)

 

--查看dave 表结构：

mysql> desc dave;

+-------+----------+------+-----+---------+-------+

| Field | Type     | Null | Key | Default | Extra |

+-------+----------+------+-----+---------+-------+

| id   | int(11)  | YES  |     | NULL   |       |

| name | char(20) | YES  |     | NULL   |       |

+-------+----------+------+-----+---------+-------+

2 rows in set (0.00 sec)

 

--向dave 表里插入2条记录：

mysql> insert into davevalues(1,'dave');

Query OK, 1 row affected (0.00 sec)

 

mysql> insert into davevalues(2,'anqing');

Query OK, 1 row affected (0.01 sec)

 

mysql> select * from dave;

+------+--------+

| id  | name   |

+------+--------+

|   1 | dave   |

|   2 | anqing |

+------+--------+

2 rows in set (0.00 sec)

 

--update 表：

mysql> update dave set name='david dai'where id=1;

Query OK, 1 row affected (0.01 sec)

Rows matched: 1  Changed: 1 Warnings: 0

 

mysql> select * from dave;

+------+-----------+

| id  | name      |

+------+-----------+

|   1 | david dai |

|   2 | anqing    |

+------+-----------+

2 rows in set (0.00 sec)

 

--drop 表：

mysql> drop table dave;

Query OK, 0 rows affected (0.01 sec)

 

--drop 数据库：

mysql> drop database dave;

Query OK, 0 rows affected (0.00 sec)

 

mysql> show databases;

+--------------------+

| Database           |

+--------------------+

| information_schema |

| mysql              |

| performance_schema |

| test               |

+--------------------+

4 rows in set (0.01 sec)

至此，操作结束。 

-------------------------------------------------------------------------------------------------------

版权所有，文章允许转载，但必须以链接方式注明源地址，否则追究法律责任!

转至：http://blog.csdn.net/tianlesoftware/article/details/7001808

=================================================

最后创建远程连接帐号：

首先要声明一下：一般情况下，修改MySQL密码，授权，是需要有mysql里的root权限的。
注：本操作是在WIN命令提示符下，phpMyAdmin同样适用。
用户：phplamp
用户数据库：phplampDB

1.MySQL命令行新建用户

//登录MYSQL
@>mysql -u root -p
@>密码
//创建用户
mysql> insert into mysql.user(Host,User,Password) values('localhost','phplamp',password('1234'));
//刷新系统权限表
mysql>flush privileges;
这样就创建了一个名为：phplamp  密码为：1234  的用户。

//退出后登录一下
mysql>exit;
@>mysql -u phplamp -p
@>输入密码
mysql>登录成功

2.MySQL命令行为用户授权

//登录MYSQL（有ROOT权限）。我里我以ROOT身份登录.
@>mysql -u root -p
@>密码
//首先为用户创建一个数据库(phplampDB)
mysql>create database phplampDB;
//授权phplamp用户拥有phplamp数据库的所有权限
@>grant all privileges on phplampDB.* to phplamp@localhost identified by '1234';
//刷新系统权限表
mysql>flush privileges;
mysql>其它操作

//如果想指定部分权限给一用户，可以这样来写:
mysql>grant select,update on phplampDB.* to phplamp@localhost identified by '1234';
//刷新系统权限表。
mysql>flush privileges;

mysql> grant 权限1,权限2,…权限n on 数据库名称.表名称 to 用户名@用户地址 identified by ‘连接口令’;

权限1,权限2,…权限n代表select,insert,update,delete,create,drop,index,alter,grant,references,reload,shutdown,process,file等14个权限。
当权限1,权限2,…权限n被all privileges或者all代替，表示赋予用户全部权限。
当数据库名称.表名称被*.*代替，表示赋予用户操作服务器上所有数据库所有表的权限。
用户地址可以是localhost，也可以是ip地址、机器名字、域名。也可以用’%'表示从任何地址连接。
‘连接口令’不能为空，否则创建失败。

例如：
mysql>grant select,insert,update,delete,create,drop on vtdc.employee to joe@10.163.225.87 identified by ‘123′;
给来自10.163.225.87的用户joe分配可对数据库vtdc的employee表进行select,insert,update,delete,create,drop等操作的权限，并设定口令为123。

mysql>grant all privileges on vtdc.* to joe@10.163.225.87 identified by ‘123′;
给来自10.163.225.87的用户joe分配可对数据库vtdc所有表进行所有操作的权限，并设定口令为123。

mysql>grant all privileges on *.* to joe@10.163.225.87 identified by ‘123′;
给来自10.163.225.87的用户joe分配可对所有数据库的所有表进行所有操作的权限，并设定口令为123。

mysql>grant all privileges on *.* to joe@localhost identified by ‘123′;
给本机用户joe分配可对所有数据库的所有表进行所有操作的权限，并设定口令为123。 

配置防火墙

1. 修改/etc/sysconfig/iptables 文件:

[plain] view plaincopy

1. vi /etc/sysconfig/iptables  

2. 在COMMIT之前加入以下内容:

[plain] view plaincopy

1. -A INPUT -m state --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT  

3. 重启Iptables:

[plain] view plaincopy

1. service iptables restart  
2. ## OR ##  
3. /etc/init.d/iptables restart