CentOS Linux解决Device eth0 does not seem to be present

CentOS Linux解决Device eth0 does not seem to be present一，问题描述在VMware里克隆出来的CentOS Linux。。ifconfig...没有看到eth0.。然后重启网卡又报下面错误。故障现象：service network restartShutting down loopback insterface: [ OK ]Bringing up loopback insterface: [ OK ]Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED]二，解决办法1；首先，打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示：# vi /etc/udev/rules.d/70-persistent-net.rules# This file was automatically generated by the /lib/udev/write_net_rules# program, run by the persistent-net-generator.rules rules file.## You can modify it, as long as you keep each rule on a single# line, and change only the value of the NAME= key.# PCI device 0x1022:0x2000 (pcnet32)SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:97", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"# PCI device 0x1022:0x2000 (pcnet32)SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:50:bd:17", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"记录下，eth1网卡的mac地址00:0c:29:50:bd:17接下来，打开/etc/sysconfig/network-scripts/ifcfg-eth0# vi /etc/sysconfig/network-scripts/ifcfg-eth0将 DEVICE="eth0"  改成  DEVICE="eth1"  ,将 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址  HWADDR="00:0c:29:50:bd:17"最后，重启网络# service network restart或者# /etc/init.d/network restart正常了。21、删除/etc/udev/rules.d/70-persistent-net.rules文件，重启系统。3、如果上面的不起作用    (1), ifconfig 查看HWADDR的值    (2), /etc/sysconfig/network-script/ifcfg-eth1中修改ifconfig中查出的HWADDR值；