CentOS Linux解决Device eth0 does not seem to be present
来源:互联网 发布:辽宁体育频道哪个软件 编辑:程序博客网 时间:2024/05/01 15:32
ifconfig...没有看到eth0.。然后重启网卡又报下面错误。
故障现象:
service network restart
Shutting down loopback insterface: [ OK ]
Bringing up loopback insterface: [ OK ]
Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED]
解决办法:
首先,打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示:
# vi /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:9
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:50:bd:1
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
记录下,eth1网卡的mac地址00:0c:29:50:bd:17
接下来,打开/etc/sysconfig/network-scripts/ifcfg-eth0
# vi /etc/sysconfig/network-scripts/ifcfg-eth0
将 DEVICE="eth0" 改成 DEVICE="eth1" ,
将 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址 HWADDR="00:0c:29:50:bd:17"
最后,重启网络
# service network restart
或者
# /etc/init.d/network restart
正常了。
故障现象:
service network restart
Shutting down loopback insterface: [ OK ]
Bringing up loopback insterface: [ OK ]
Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED]
解决办法:
首先,打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示:
# vi /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:9
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:50:bd:1
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
记录下,eth1网卡的mac地址00:0c:29:50:bd:17
接下来,打开/etc/sysconfig/network-scripts/ifcfg-eth0
# vi /etc/sysconfig/network-scripts/ifcfg-eth0
将 DEVICE="eth0" 改成 DEVICE="eth1" ,
将 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址 HWADDR="00:0c:29:50:bd:17"
最后,重启网络
# service network restart
或者
# /etc/init.d/network restart
正常了。
0 0
- Linux解决Device eth0 does not seem to be present
- Linux 解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- Linux CentOS解决Device eth0 does not seem to be present问题
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- java读取项目中配置文件的几种方法
- HDOJ Ignatius and the Princess IV 1029
- 数字图像处理,自适应中值滤波的C++实现
- python 多线程就这么简单
- Shell脚本及Python的一些用法
- CentOS Linux解决Device eth0 does not seem to be present
- 处理java非正常的线程终止
- setCellTest
- 14、Longest Common Prefix
- Struts2中过滤器和拦截器的区别
- 用Lambda或者Linq语法对结果进行Group by并输出
- Android:继承ScrollView实现自定义向上滚动弹出框(背景半透明)
- 构造与析构 && static 问题
- winForm +access 数据连接 出错 未在本地计算机上注册“Microsoft.Jet.OLEDB.12.0”