How to use FTP from the command line.
来源:互联网 发布:电脑学英语软件 编辑:程序博客网 时间:2024/05/06 02:27
How to use FTP from the command line.
Note: Some systems allow anonymous ftp access. To use anonymous ftp, use anonymous as your userid andyour e-mail address as the logon password.
Logging Onto and Off of a Remote System
To begin using Microsoft's FTP client, Open a command prompt and switch to the destination directory (where you want the download file).
To start an FTP session, enter: ftp host_name
where hostname is the name or IP address of the remote system.
You will then be asked to enter your userid and password.
Once you have successfully logged onto a remote system, you will be able to use ftp commands to view a listing of files on the remote system and transfer files between the two systems.
Example: Download i386.exe (Windows NT 3.5 Resource Kit) from ftp://ftp.microsoft.com/bussys/winnt/winnt-public/reskit/nt35/i386 to C:\Temp\Download
- Open a command prompt. Enter CD C:\Temp\Download (assuming that directory exists).
Enter: ftp ftp.microsoft.com
You should now see a prompt similar to this:
Connected to ftp.microsoft.com.
220 Microsoft FTP Service
User (ftp.microsoft.com:(none)): - For the userid, Enter: anonymous
You should see a prompt similar to this:
331 Anonymous access allowed, send identity (e-mail name) as password.
Password: - Enter: userid@domain.com as the password at the "Password:" prompt.
Note: Any e-mail address in a userid@domain.com format should work. You will not be able to see the password as you type it. - To download i386.exe from the bussys/winnt/winnt-public/reskit/nt35/i386 directory, Enter: get bussys/winnt/winnt-public/reskit/nt35/i386/i386.exe
Note: You could have also used ls to view the directory and file names, cd bussys/winnt/winnt-public/reskit/nt35/i386 to switch directories, and get i386.exe to download the file from within that directory.
- To end the FTP session, Enter: quit or bye.
example: expand choice.ex_ choice.exe
FTP Commands
For a list of FTP commands, at the "ftp>" prompt, Enter: helpWhen using ftp from the command prompt, the following list of supported commands will be displayed:
Note: Hover your mouse over a command to see what the output of "help *" is for that command.
!
delete
literal
prompt
send
?
debug
ls
put
status
append
dir
mdelete
pwd
trace
ascii
disconnect
mdir
quit
type
bell
get
mget
quote
user
binary
glob
mkdir
recv
verbose
bye
hash
mls
remotehelp
cd
help
mput
rename
close
lcd
open
rmdir
The question mark (?) command is equivalent to the help command. Typing help or ? followed by the name of a command will display a brief description of the command's purpose.
The exclamation point (!) can be used to shell to the system (command) prompt. Type Exit to return to the FTP session. You can also issue a subset of system commands to perform as you shell out, e.g., ! dir %windir% | more. When the commands in the shell have completed, you will be returned to the FTP session.
The pwd command will list the current directory on the remote machine. To change directories on the remote machine, use the cd command. To create a new directory on the remote machine, use the mkdir command followed by the name you would like to assign to the new directory. The lcd command can be used to change directories on the local (PC) machine.
To display a listing of files on the remote system, enter: ls or dir.
To download a file (copy a file from the remote system to your PC), you can use the command get or recvfollowed by the name of the file you would like to download. Optionally, you can follow the filename with a second filename which will be assigned to the file when it is downloaded to your PC. To download multiple files, you can use the mget command followed by a descriptor for the files you would like to download (e.g.: *.f for all files ending in ".f" or *.* for all files). You will be prompted to indicate whether you would like to download each file in turn. To turn off this prompting, enter the prompt command prior to entering the mget command; you will receive the message "Interactive mode OFF" indicating that prompting has been deactivated.
By default, files are downloaded and uploaded in ASCII file transfer mode. To download or upload files using Binary format mode, enter the command Binary at the "ftp>" prompt prior to downloading or uploading the file(s). To return to ASCII file transfer mode, enter the ASCII command.
To upload a file (copy a file from your PC to the remote system), you can use the command put or send followed by the name of the file you would like to upload. Optionally, you can follow the filename with a second filename which will be assigned to the file when it is uploaded to the remote system. The mput command can be used to upload multiple files.
You can use the close or disconnect command to drop the current ftp connection without exiting from the command enironment and then use the open command to connect to a new host.
Much of this article was taken from the dead link,http://www.cc.vt.edu/cc/us/docs/faqlib/windows95/clients/msftp.html
To see the original article, go tohttp://web.archive.org/web/*/http://www.cc.vt.edu/cc/us/docs/faqlib/windows95/clients/msftp.html
- How to use FTP from the command line.
- How to access Dropbox from the command line in Linux
- How to Deleting a Storage Repository From the Command Line?
- Know How to Use Command-line Tools
- Know How to Use Command-Line Tools
- How to use the Linux top command
- How to easily open files and URLs from the command line
- How to monitor Nginx web server from the command line in real time
- How to use 7zip on Linux command Line
- How to Use Android ADB Command Line Tool on mac
- How to use VirtualBox in Terminal / Command line
- How to run FTE and FTE from command line
- How to open Firefox and chrome from command line
- How to identify video formats from command line on Linux
- Ubuntu Tip:How to show desktop from command line
- TestNG - How to run TestNG from command line successfully
- Why Use The Command Line?
- How to use the Erase Data and Disable Handheld command
- 高效且可伸缩的结果缓存
- 二叉树入门(对称二叉树)
- (Java)微信之个人公众账号开发(二)——接收并处理用户消息(下)
- 改写的CBitmap类,加入了保存显示功能,新加入载入图片功能
- matlab中提取mat文件中的某行某列的值
- How to use FTP from the command line.
- Websocket协议数据帧传输和关闭连接
- python进阶一_简介,安装与环境部署
- 字符串水题
- linux笔记 cp rm mv
- iBatis与MyBatis了解
- POJ 2586&&CF 245E
- Java多线程编程总结
- 二分查找法