cubietruck启动错误信息记录
来源:互联网 发布:瑜伽 书籍 知乎 编辑:程序博客网 时间:2024/04/30 19:05
CPU: Allwinner A20 (SUN7I)
Board: Cubietruck
I2C: ready
DRAM: 2 GiB
MMC: SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: dwmac.1c50000
Hit any key to stop autoboot: 0
reading uEnv.txt
240 bytes read in 16 ms (14.6 KiB/s)
Loaded environment from uEnv.txt
Running uenvcmd ...
reading uImage
2540392 bytes read in 139 ms (17.4 MiB/s)
reading dtb
23026 bytes read in 28 ms (802.7 KiB/s)
## Booting kernel from Legacy Image at 46000000 ...
Image Name: ARM OpenWrt Linux-3.14.18
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2540328 Bytes = 2.4 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 49000000
Booting using the fdt blob at 0x49000000
Loading Kernel Image ... OK
Using Device Tree in place at 49000000, end 490089f1
Starting kernel ...
郲 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.18 (hades@PandoraBox-Server) (gcc version 4.8.3 (PandoraBox/Linaro GCC 4.8-2014.04 svn-r173) ) #1 SMP PREEMPT Fri Oct 31 10:52:15 CST 2014
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Cubietech Cubietruck
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] PERCPU: Embedded 7 pages/cpu @ee7d6000 s7104 r8192 d13376 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768
[ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk rootwait root=/dev/mmcblk0p2
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 2074212K/2097152K available (3603K kernel code, 161K rwdata, 1016K rodata, 182K init, 602K bss, 22940K reserved, 1318912K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc048af04 (4620 kB)
[ 0.000000] .init : 0xc048b000 - 0xc04b8bc0 ( 183 kB)
[ 0.000000] .data : 0xc04ba000 - 0xc04e2660 ( 162 kB)
[ 0.000000] .bss : 0xc04e2660 - 0xc057921c ( 603 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000023] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
[ 0.000182] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 26843545593ns
[ 0.000347] Console: colour dummy device 80x30
[ 0.000385] Calibrating delay loop... 1915.28 BogoMIPS (lpj=9576448)
[ 0.060077] pid_max: default: 32768 minimum: 301
[ 0.060258] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.060272] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.065947] CPU: Testing write buffer coherency: ok
[ 0.066297] /cpus/cpu@0 missing clock-frequency property
[ 0.066318] /cpus/cpu@1 missing clock-frequency property
[ 0.066331] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.066357] Setting up static identity map for 0x400118a8 - 0x400118dc
[ 0.120539] CPU1: failed to boot: -38
[ 0.120568] Brought up 1 CPUs
[ 0.120576] SMP: Total of 1 processors activated.
[ 0.120583] CPU: All CPU(s) started in SVC mode.
[ 0.125338] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[ 0.125671] pinctrl core: initialized pinctrl subsystem
[ 0.126047] regulator-dummy: no parameters
[ 0.126359] NET: Registered protocol family 16
[ 0.126620] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.135949] bio: create slab <bio-0> at 0
[ 0.136588] reg-fixed-voltage ahci-5v.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@1, deferring probe
[ 0.136618] platform ahci-5v.3: Driver reg-fixed-voltage requests probe deferral
[ 0.136644] reg-fixed-voltage usb1-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[ 0.136659] platform usb1-vbus.4: Driver reg-fixed-voltage requests probe deferral
[ 0.136680] reg-fixed-voltage usb2-vbus.5: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
[ 0.136694] platform usb2-vbus.5: Driver reg-fixed-voltage requests probe deferral
[ 0.136717] reg-fixed-voltage vmmc3.7: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/vmmc3_pin@0, deferring probe
[ 0.136730] platform vmmc3.7: Driver reg-fixed-voltage requests probe deferral
[ 0.137116] SCSI subsystem initialized
[ 0.137634] usbcore: registered new interface driver usbfs
[ 0.137698] usbcore: registered new interface driver hub
[ 0.137831] usbcore: registered new device driver usb
[ 0.137942] pps_core: LinuxPPS API ver. 1 registered
[ 0.137951] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.137974] PTP clock support registered
[ 0.138859] Switched to clocksource timer
[ 0.140351] Clockevents: could not switch to one-shot mode: dummy_timer is not functional.
[ 0.140369] Could not switch to high resolution mode on CPU 0
[ 0.145820] NET: Registered protocol family 2
[ 0.146812] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.146904] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.147026] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.147101] TCP: reno registered
[ 0.147119] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.147176] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.147498] NET: Registered protocol family 1
[ 0.148812] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.148915] audit: initializing netlink subsys (disabled)
[ 0.148983] audit: type=2000 audit(0.130:1): initialized
[ 0.149558] bounce pool size: 64 pages
[ 0.157407] VFS: Disk quotas dquot_6.5.2
[ 0.157747] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.159660] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.159673] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.160614] msgmni has been set to 1475
[ 0.162483] io scheduler noop registered
[ 0.162502] io scheduler deadline registered
[ 0.162546] io scheduler cfq registered (default)
[ 0.162824] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
[ 0.165075] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 0.206618] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.229046] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A
[ 0.810043] console [ttyS0] enabled
[ 0.835435] dw-apb-uart 1c28800.serial: Couldn't set LCR to 0
[ 0.842180] dw-apb-uart 1c28800.serial: Couldn't set LCR to 0
[ 0.847960] 1c28800.serial: ttyS1 at MMIO 0x1c28800 (irq = 35, base_baud = 1500000) is a U6_16550A
[ 0.857854] platform 1c18000.sata: Driver ahci-sunxi requests probe deferral
[ 0.866574] stmmaceth 1c50000.ethernet: no regulator found
[ 0.872165] stmmaceth 1c50000.ethernet: no reset control found
[ 0.877994] Ring mode enabled
[ 0.881063] No HW DMA feature register supported
[ 0.885588] Normal descriptors
[ 0.888910] TX Checksum insertion supported
[ 0.897311] libphy: stmmac: probed
[ 0.900816] eth0: PHY ID 001cc915 at 0 IRQ 0 (stmmac-0:00) active
[ 0.906907] eth0: PHY ID 001cc915 at 1 IRQ 0 (stmmac-0:01)
[ 0.912531] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.919052] ehci-platform: EHCI generic platform driver
[ 0.924506] platform 1c14000.usb: Driver ehci-platform requests probe deferral
[ 0.931873] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
[ 0.939268] usbcore: registered new interface driver usb-storage
[ 0.945628] mousedev: PS/2 mouse device common for all mice
[ 0.952914] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 0.961733] sunxi-mmc 1c0f000.mmc: Got CD GPIO #225.
[ 0.966915] sunxi-mmc 1c0f000.mmc: base:0xf00f4000 irq:64
[ 0.972876] platform 1c12000.mmc: Driver sunxi-mmc requests probe deferral
[ 0.981068] sunxi-ss 1c15000.crypto-engine: Die ID 0
[ 0.987474] TCP: cubic registered
[ 0.991008] Initializing XFRM netlink socket
[ 0.995309] NET: Registered protocol family 17
[ 0.999853] 8021q: 802.1Q VLAN Support v1.8
[ 1.004201] Registering SWP/SWPB emulation handler
[ 1.009391] registered taskstats version 1
[ 1.013602] regulator-dummy: disabling
[ 1.017887] ahci-5v: 5000 mV
[ 1.021387] usb1-vbus: 5000 mV
[ 1.024860] usb2-vbus: 5000 mV
[ 1.028311] vmmc3: 3300 mV
[ 1.100355] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
[ 1.107845] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
[ 1.113745] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 1.122717] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
[ 1.133684] scsi0 : ahci_platform
[ 1.137353] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[ 1.145660] ehci-platform 1c14000.usb: EHCI Host Controller
[ 1.151416] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
[ 1.159261] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000
[ 1.180326] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[ 1.186603] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.194433] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.201686] usb usb1: Product: EHCI Host Controller
[ 1.206579] usb usb1: Manufacturer: Linux 3.14.18 ehci_hcd
[ 1.212086] usb usb1: SerialNumber: 1c14000.usb
[ 1.217166] hub 1-0:1.0: USB hub found
[ 1.221002] hub 1-0:1.0: 1 port detected
[ 1.225572] ehci-platform 1c1c000.usb: EHCI Host Controller
[ 1.231209] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[ 1.239039] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000
[ 1.260326] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[ 1.266592] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.273394] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.280619] usb usb2: Product: EHCI Host Controller
[ 1.285492] usb usb2: Manufacturer: Linux 3.14.18 ehci_hcd
[ 1.292007] usb usb2: SerialNumber: 1c1c000.usb
[ 1.298063] hub 2-0:1.0: USB hub found
[ 1.301870] hub 2-0:1.0: 1 port detected
[ 1.307000] sunxi-mmc 1c12000.mmc: base:0xf0138000 irq:67
[ 1.387208] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 1.500336] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.520420] Waiting for root device /dev/mmcblk0p2...
[ 1.590324] mmc0: new high speed SDXC card at address 59b4
[ 1.596432] mmcblk0: mmc0:59b4 SD64G 59.0 GiB
[ 1.602413] mmcblk0: p1 p2
[ 1.632141] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[ 1.641270] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[ 1.671691] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.679840] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.686947] Freeing unused kernel memory: 180K (c048b000 - c04b8000)
[ 1.696089] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
[ 1.709209] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.18 #1
[ 1.715208] Backtrace:
[ 1.717686] [<c001a2a0>] (dump_backtrace) from [<c001a584>] (show_stack+0x18/0x1c)
[ 1.725244] r6:00000000 r5:ee082008 r4:c04ce83c r3:00000000
[ 1.730955] [<c001a56c>] (show_stack) from [<c01b8030>] (dump_stack+0xa0/0xd8)
[ 1.738175] [<c01b7f90>] (dump_stack) from [<c0023400>] (panic+0xb4/0x200)
[ 1.745038] r6:00000000 r5:c000cb48 r4:c041ee60 r3:00000001
[ 1.750747] [<c0023350>] (panic) from [<c000cc44>] (kernel_init+0xfc/0x104)
[ 1.757698] r3:c04bd080 r2:c04bac54 r1:2e31f000 r0:c041ee60
[ 1.763397] r7:00000000
[ 1.765945] [<c000cb48>] (kernel_init) from [<c0008d78>] (ret_from_fork+0x14/0x3c)
[ 1.773502] r4:00000000 r3:ee082000
J6骞崱s) show-task-states(t) unmount(u) show-blocked-tasks(w)
[ 14.260290] SysRq : HELP : loglevel(0-9) reboot(b) crash(c) terminate-all-tasks(e) memory-full-oom-kill(f) kill-all-tasks(i) thaw-filesystems(j) sak(k) show-backtrace-all-active-cpus(l) show-memory-usage(m) nice-all-RT-tasks(n) poweroff(o) show-registers(p) show-all-timers(q) unraw(r) sync(s) show-task-states(t) unmount(u) show-blocked-tasks(w)
[ 109.531706] SysRq : HELP : loglevel(0-9) reboot(b) crash(c) terminate-all-tasks(e) memory-full-oom-kill(f) kill-all-tasks(i) thaw-filesystems(j) sak(k) show-backtrace-all-active-cpus(l) show-memory-usage(m) nice-all-RT-tasks(n) poweroff(o) show-registers(p) show-all-timers(q) unraw(r) sync(s) show-task-states(t) unmount(u) show-blocked-tasks(w)
[ 109.562483] SysRq : HELP : loglevel(0-9) reboot(b) crash(c) terminate-all-tasks(e) memory-full-oom-kill(f) kill-all-tasks(i) thaw-filesystems(j) sak(k) show-backtrace-all-active-cpus(l) show-memory-usage(m) nice-all-RT-tasks(n) poweroff(o) show-registers(p) show-all-timers(q) unraw(r) sync(s) show-task-states(t) unmount(u) show-blocked-tasks(w)
[ 109.593262] SysRq : HELP : loglevel(0-9) reboot(b) crash(c) terminate-all-tasks(e) memory-full-oom-kill(f) kill-all-tasks(i) thaw-filesystems(j) sak(k) show-backtrace-all-active-cpus(l) show-memory-usage(m) nice-all-RT-tasks(n) poweroff(o) show-registers(p) show-all-timers(q) unraw(r) sync(s) show-task-states(t) unmount(u) show-blocked-tasks(w)
[ 145.977360] SysRq : HELP : loglevel(0-9) reboot(b) crash(c) terminate-all-tasks(e) memory-full-oom-kill(f) kill-all-tasks(i) thaw-filesystems(j) sak(k) show-backtrace-all-active-cpus(l) show-memory-usage(m) nice-all-RT-tasks(n) poweroff(o) show-registers(p) show-all-timers(q) unraw(r) sync(s) show-task-states(t) unmount(u) show-blocked-tasks(w)
[ 146.008136] SysRq : HELP : loglevel(0-9) reboot(b) crash(c) terminate-all-tasks(e) memory-full-oom-kill(f) kill-all-tasks(i) thaw-filesystems(j) sak(k) show-backtrace-all-active-cpus(l) show-memory-usage(m) nice-all-RT-tasks(n) poweroff(o) show-registers(p) show-all-timers(q) unraw(r) sync(s) show-task-states(t) unmount(u) show-blocked-tasks(w)
[ 146.274630] SysRq : HELP : loglevel(0-9) reboot(b) crash(c) terminate-all-tasks(e) memory-full-oom-kill(f) kill-all-tasks(i) thaw-filesystems(j) sak(k) show-backtrace-all-active-cpus(l) show-memory-usage(m) nice-all-RT-tasks(n) poweroff(o) show-registers(p) show-all-timers(q) unraw(r) sync(s) show-task-states(t) unmount(u) show-blocked-tasks(w)
[ 146.305408] SysRq : HELP : loglevel(0-9) reboot(b) crash(c) terminate-all-tasks(e) memory-full-oom-kill(f) kill-all-tasks(i) thaw-filesystems(j) sak(k) show-backtrace-all-active-cpus(l) show-memory-usage(m) nice-all-RT-tasks(n) poweroff(o) show-registers(p) show-all-timers(q) unraw(r) sync(s) show-task-states(t) unmount(u) show-blocked-tasks(w)
[ 146.630974] SysRq : HELP : loglevel(0-9) reboot(b) crash(c) terminate-all-tasks(e) memory-full-oom-kill(f) kill-all-tasks(i) thaw-filesystems(j) sak(k) show-backtrace-all-active-cpus(l) show-memory-usage(m) nice-all-RT-tasks(n) poweroff(o) show-registers(p) show-all-timers(q) unraw(r) sync(s) show-task-states(t) unmount(u) show-blocked-tasks(w)
[ 147.476492] SysRq : HELP : loglevel(0-9) reboot(b) crash(c) terminate-all-tasks(e) memory-full-oom-kill(f) kill-all-tasks(i) thaw-filesystems(j) sak(k) show-backtrace-all-active-cpus(l) show-memory-usage(m) nice-all-RT-tasks(n) poweroff(o) show-registers(p) show-all-timers(q) unraw(r) sync(s) show-task-states(t) unmount(u) show-blocked-tasks(w)
Icrash(c) terminate-all-tasks(e) memory-full-oom-kill(f) kill-all-tasks(i) thaw-filesystems(j) sak(k) show-backtrace
0 0
- cubietruck启动错误信息记录
- cubietruck lubuntu启动信息分析
- Cubietruck开发板SPL启动分析
- CubieTruck(CubieBoard 3)从NAND启动Cubian
- Cubietruck---9.Linux3.3_initramfs启动分析
- Cubietruck---18.input子系统启动流程分析
- Android 错误信息记录
- json错误信息记录
- MySQL错误信息记录
- Android Studio错误信息记录[记录]
- tomcat启动,错误信息一闪而过
- Cubietruck制作可启动SD卡(只测试uboot)
- vim E303错误信息解决记录
- iOS 记录错误信息(附 源码)
- apache启动失败查看错误信息
- cubieTruck AP
- 在BCB中记录现场错误信息
- 统一显示并记录错误信息 500
- android adb pull/push permission denied可能的解决办法
- 别让我一个人醉
- 花开过——但不在雨季(灵感之作)
- OpenGL中的光照系列之一[基本理论]
- 论-大学生的恋爱
- cubietruck启动错误信息记录
- 2011年中国科学院院士增选初步候选…
- centos用ISO光盘镜像搭建本地yum源
- 好想娶你
- 本人 习惯用语
- 品味时尚 ——( 本人高三作文)
- 【中】【 国 】【悲 】【句】
- 已经失去你
- Jsp9大内置对象