openwrt的cubietruck dmesg信息

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.18 (hades@PandoraBox-Server) (gcc version 4.8.3 (PandoraBox/Linaro GCC 4.8-2014.04 svn-r173) ) #5 SMP PREEMPT Tue Nov 4 14:08:28 CST 2014
[    0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Cubietech Cubietruck
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 524288
[    0.000000] free_area_init_node: node 0, pgdat c04bf580, node_mem_map ee7fb000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2576 pages used for memmap
[    0.000000]   HighMem zone: 329728 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 7 pages/cpu @ee7d6000 s7104 r8192 d13376 u32768
[    0.000000] pcpu-alloc: s7104 r8192 d13376 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522768
[    0.000000] Kernel command line: console=ttyS0,115200 earlyprintk rootwait root=/dev/mmcblk0p2
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 2074212K/2097152K available (3603K kernel code, 161K rwdata, 1016K rodata, 182K init, 602K bss, 22940K reserved, 1318912K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc048af04   (4620 kB)
[    0.000000]       .init : 0xc048b000 - 0xc04b8bc0   ( 183 kB)
[    0.000000]       .data : 0xc04ba000 - 0xc04e2660   ( 162 kB)
[    0.000000]        .bss : 0xc04e2660 - 0xc057921c   ( 603 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000024] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
[    0.000182] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 26843545593ns
[    0.000351] Console: colour dummy device 80x30
[    0.000389] Calibrating delay loop... 1915.28 BogoMIPS (lpj=9576448)
[    0.060080] pid_max: default: 32768 minimum: 301
[    0.060257] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.060272] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.065941] CPU: Testing write buffer coherency: ok
[    0.066286] /cpus/cpu@0 missing clock-frequency property
[    0.066306] /cpus/cpu@1 missing clock-frequency property
[    0.066320] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.066345] Setting up static identity map for 0x400118a8 - 0x400118dc
[    0.120549] CPU1: failed to boot: -38
[    0.120577] Brought up 1 CPUs
[    0.120585] SMP: Total of 1 processors activated.
[    0.120592] CPU: All CPU(s) started in SVC mode.
[    0.125350] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[    0.125691] pinctrl core: initialized pinctrl subsystem
[    0.126066] regulator-dummy: no parameters
[    0.126377] NET: Registered protocol family 16
[    0.126640] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.135947] bio: create slab <bio-0> at 0
[    0.136580] reg-fixed-voltage ahci-5v.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@1, deferring probe
[    0.136609] platform ahci-5v.3: Driver reg-fixed-voltage requests probe deferral
[    0.136635] reg-fixed-voltage usb1-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[    0.136650] platform usb1-vbus.4: Driver reg-fixed-voltage requests probe deferral
[    0.136672] reg-fixed-voltage usb2-vbus.5: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
[    0.136686] platform usb2-vbus.5: Driver reg-fixed-voltage requests probe deferral
[    0.136709] reg-fixed-voltage vmmc3.7: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/vmmc3_pin@0, deferring probe
[    0.136722] platform vmmc3.7: Driver reg-fixed-voltage requests probe deferral
[    0.137111] SCSI subsystem initialized
[    0.137344] libata version 3.00 loaded.
[    0.137626] usbcore: registered new interface driver usbfs
[    0.137692] usbcore: registered new interface driver hub
[    0.137829] usbcore: registered new device driver usb
[    0.137942] pps_core: LinuxPPS API ver. 1 registered
[    0.137951] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[e-mail]>
[    0.137975] PTP clock support registered
[    0.138849] Switched to clocksource timer
[    0.140355] Clockevents: could not switch to one-shot mode: dummy_timer is not functional.
[    0.140375] Could not switch to high resolution mode on CPU 0
[    0.145816] NET: Registered protocol family 2
[    0.146813] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.146904] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.147026] TCP: Hash tables configured (established 8192 bind 8192)
[    0.147105] TCP: reno registered
[    0.147123] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.147179] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.147495] NET: Registered protocol family 1
[    0.148798] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.148900] audit: initializing netlink subsys (disabled)
[    0.148967] audit: type=2000 audit(0.130:1): initialized
[    0.149546] bounce pool size: 64 pages
[    0.157371] VFS: Disk quotas dquot_6.5.2
[    0.157706] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.159610] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.159623] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.160576] msgmni has been set to 1475
[    0.162439] io scheduler noop registered
[    0.162457] io scheduler deadline registered
[    0.162501] io scheduler cfq registered (default)
[    0.162778] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
[    0.165016] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.206559] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.228830] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A
[    0.809752] console [ttyS0] enabled
[    0.835142] dw-apb-uart 1c28800.serial: Couldn't set LCR to 0
[    0.841887] dw-apb-uart 1c28800.serial: Couldn't set LCR to 0
[    0.847665] 1c28800.serial: ttyS1 at MMIO 0x1c28800 (irq = 35, base_baud = 1500000) is a U6_16550A
[    0.857564] platform 1c18000.sata: Driver ahci-sunxi requests probe deferral
[    0.866274] stmmaceth 1c50000.ethernet: no regulator found
[    0.871866] stmmaceth 1c50000.ethernet: no reset control found
[    0.877696]  Ring mode enabled
[    0.880761]  No HW DMA feature register supported
[    0.885288]  Normal descriptors
[    0.888608]  TX Checksum insertion supported
[    0.897024] libphy: stmmac: probed
[    0.900526] eth0: PHY ID 001cc915 at 0 IRQ 0 (stmmac-0:00) active
[    0.906616] eth0: PHY ID 001cc915 at 1 IRQ 0 (stmmac-0:01)
[    0.912242] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.918763] ehci-platform: EHCI generic platform driver
[    0.924220] platform 1c14000.usb: Driver ehci-platform requests probe deferral
[    0.931578] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
[    0.938966] usbcore: registered new interface driver usb-storage
[    0.945328] mousedev: PS/2 mouse device common for all mice
[    0.952608] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    0.961439] sunxi-mmc 1c0f000.mmc: Got CD GPIO #225.
[    0.966622] sunxi-mmc 1c0f000.mmc: base:0xf00f4000 irq:64
[    0.972577] platform 1c12000.mmc: Driver sunxi-mmc requests probe deferral
[    0.980758] sunxi-ss 1c15000.crypto-engine: Die ID 0
[    0.987155] TCP: cubic registered
[    0.990691] Initializing XFRM netlink socket
[    0.994991] NET: Registered protocol family 17
[    0.999535] 8021q: 802.1Q VLAN Support v1.8
[    1.003881] Registering SWP/SWPB emulation handler
[    1.009068] registered taskstats version 1
[    1.013285] regulator-dummy: disabling
[    1.017565] ahci-5v: 5000 mV 
[    1.021057] usb1-vbus: 5000 mV 
[    1.024527] usb2-vbus: 5000 mV 
[    1.027980] vmmc3: 3300 mV 
[    1.100357] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
[    1.107844] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
[    1.113744] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[    1.122716] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc 
[    1.133688] scsi0 : ahci_platform
[    1.137358] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[    1.145668] ehci-platform 1c14000.usb: EHCI Host Controller
[    1.151427] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
[    1.159267] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000
[    1.180327] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[    1.186607] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.194439] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.201692] usb usb1: Product: EHCI Host Controller
[    1.206585] usb usb1: Manufacturer: Linux 3.14.18 ehci_hcd
[    1.212093] usb usb1: SerialNumber: 1c14000.usb
[    1.217173] hub 1-0:1.0: USB hub found
[    1.221013] hub 1-0:1.0: 1 port detected
[    1.225576] ehci-platform 1c1c000.usb: EHCI Host Controller
[    1.231213] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[    1.239046] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000
[    1.260330] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[    1.266597] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.273398] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.280623] usb usb2: Product: EHCI Host Controller
[    1.285496] usb usb2: Manufacturer: Linux 3.14.18 ehci_hcd
[    1.292014] usb usb2: SerialNumber: 1c1c000.usb
[    1.298065] hub 2-0:1.0: USB hub found
[    1.301878] hub 2-0:1.0: 1 port detected
[    1.306999] sunxi-mmc 1c12000.mmc: base:0xf0138000 irq:67
[    1.387532] mmc0: host does not support reading read-only switch. assuming write-enable.
[    1.500339] ata1: SATA link down (SStatus 0 SControl 300)
[    1.520426] Waiting for root device /dev/mmcblk0p2...
[    1.590327] mmc0: new high speed SDHC card at address 1234
[    1.596431] mmcblk0: mmc0:1234 SA08G 7.21 GiB 
[    1.602408]  mmcblk0: p1 p2
[    1.636008] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[    1.643479] Freeing unused kernel memory: 180K (c048b000 - c04b8000)
[    1.924420] sunxi-mmc 1c12000.mmc: smc 1 err, cmd 8, RTO !!
[    1.985669] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.095159] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.109012] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.192505] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.548437] mmc1: new high speed SDIO card at address 0001
[    2.650674] random: mktemp urandom read with 28 bits of entropy available
[    7.711834] NET: Registered protocol family 10
[    7.737682] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    7.771563] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    7.810498] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
[    7.818422] Backport generated by backports.git backports-20140320-37-g5c33da0
[    7.848553] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.950060] xt_time: kernel timezone is -0000
[    7.991334] cfg80211: Calling CRDA to update world regulatory domain
[    8.009200] cfg80211: World regulatory domain updated:
[    8.020481] cfg80211:  DFS Master region: unset
[    8.024853] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    8.045045] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    8.060212] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    8.080493] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    8.088503] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[    8.110491] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    8.118591] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    8.140494] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    8.148504] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    8.174453] PPP generic driver version 2.4.2
[    8.184814] NET: Registered protocol family 24
[    8.227738] usbcore: registered new interface driver rtl8192cu
[  140.860932] usb 1-1: new high-speed USB device number 2 using ehci-platform
[  141.013741] usb 1-1: New USB device found, idVendor=048d, idProduct=1167
[  141.020444] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  141.027701] usb 1-1: Product: USB Mass Storage Device
[  141.032820] usb 1-1: Manufacturer: iTE Tech
[  141.037002] usb 1-1: SerialNumber: 0000000922310679
[  141.044224] usb-storage 1-1:1.0: USB Mass Storage device detected
[  141.065014] scsi1 : usb-storage 1-1:1.0
[  142.061970] scsi 1:0:0:0: Direct-Access     iT1167B  USB Flash Disk   0.00 PQ: 0 ANSI: 2
[  142.072658] sd 1:0:0:0: [sda] 7892992 512-byte logical blocks: (4.04 GB/3.76 GiB)
[  142.080885] sd 1:0:0:0: [sda] Write Protect is off
[  142.085909] sd 1:0:0:0: [sda] Mode Sense: 00 00 00 00
[  142.086642] sd 1:0:0:0: [sda] Asking for cache data failed
[  142.092258] sd 1:0:0:0: [sda] Assuming drive cache: write through
[  142.102883] sd 1:0:0:0: [sda] Asking for cache data failed
[  142.108373] sd 1:0:0:0: [sda] Assuming drive cache: write through
[  142.116058]  sda: sda4
[  142.127295] sd 1:0:0:0: [sda] Asking for cache data failed
[  142.134845] sd 1:0:0:0: [sda] Assuming drive cache: write through
[  142.146315] sd 1:0:0:0: [sda] Attached SCSI removable disk
[  439.399491] random: nonblocking pool is initialized