一个简单的usb鼠标事件

/* * drivers\hid\usbhid\usbmouse.c */#include <linux/kernel.h>#include <linux/slab.h>#include <linux/module.h>#include <linux/init.h>#include <linux/usb/input.h>#include <linux/hid.h>static struct input_dev *uk_dev;static char *usb_buf;static dma_addr_t usb_buf_phys;static int len;static struct urb *uk_urb;static struct usb_device_id usbmouse_as_key_id_table [] = {{ USB_INTERFACE_INFO(USB_INTERFACE_CLASS_HID, USB_INTERFACE_SUBCLASS_BOOT,USB_INTERFACE_PROTOCOL_MOUSE) },//{USB_DEVICE(0x1234,0x5678)},{ }/* Terminating entry */};static void usbmouse_as_key_irq(struct urb *urb){static unsigned char pre_val;#if 0int i;static int cnt = 0;printk("data cnt %d: ", ++cnt);for (i = 0; i < len; i++){printk("%02x ", usb_buf[i]);}printk("\n");#endif/* USB鼠标数据含义 * data[0]: bit0-左键, 1-按下, 0-松开 *          bit1-右键, 1-按下, 0-松开 *          bit2-中键, 1-按下, 0-松开  *     */if ((pre_val & (1<<0)) != (usb_buf[0] & (1<<0))){/* 左键发生了变化 */input_event(uk_dev, EV_KEY, KEY_L, (usb_buf[0] & (1<<0)) ? 1 : 0);input_sync(uk_dev);}if ((pre_val & (1<<1)) != (usb_buf[0] & (1<<1))){/* 右键发生了变化 */input_event(uk_dev, EV_KEY, KEY_S, (usb_buf[0] & (1<<1)) ? 1 : 0);input_sync(uk_dev);}if ((pre_val & (1<<2)) != (usb_buf[0] & (1<<2))){/* 中键发生了变化 */input_event(uk_dev, EV_KEY, KEY_ENTER, (usb_buf[0] & (1<<2)) ? 1 : 0);input_sync(uk_dev);}pre_val = usb_buf[0];/* 重新提交urb */usb_submit_urb(uk_urb, GFP_KERNEL);}static int usbmouse_as_key_probe(struct usb_interface *intf, const struct usb_device_id *id){struct usb_device *dev = interface_to_usbdev(intf);struct usb_host_interface *interface;struct usb_endpoint_descriptor *endpoint;int pipe;interface = intf->cur_altsetting;endpoint = &interface->endpoint[0].desc;/* a. 分配一个input_dev */uk_dev = input_allocate_device();/* b. 设置 *//* b.1 能产生哪类事件 */set_bit(EV_KEY, uk_dev->evbit);set_bit(EV_REP, uk_dev->evbit);/* b.2 能产生哪些事件 */set_bit(KEY_L, uk_dev->keybit);set_bit(KEY_S, uk_dev->keybit);set_bit(KEY_ENTER, uk_dev->keybit);/* c. 注册 */input_register_device(uk_dev);/* d. 硬件相关操作 *//* 数据传输3要素: 源,目的,长度 *//* 源: USB设备的某个端点 */pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);/* 长度: */len = endpoint->wMaxPacketSize;/* 目的: */usb_buf = usb_buffer_alloc(dev, len, GFP_ATOMIC, &usb_buf_phys);/* 使用"3要素" *//* 分配usb request block */uk_urb = usb_alloc_urb(0, GFP_KERNEL);/* 使用"3要素设置urb" */usb_fill_int_urb(uk_urb, dev, pipe, usb_buf, len, usbmouse_as_key_irq, NULL, endpoint->bInterval);uk_urb->transfer_dma = usb_buf_phys;uk_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;/* 使用URB */usb_submit_urb(uk_urb, GFP_KERNEL);return 0;}static void usbmouse_as_key_disconnect(struct usb_interface *intf){struct usb_device *dev = interface_to_usbdev(intf);//printk("disconnect usbmouse!\n");usb_kill_urb(uk_urb);usb_free_urb(uk_urb);usb_buffer_free(dev, len, usb_buf, usb_buf_phys);input_unregister_device(uk_dev);input_free_device(uk_dev);}/* 1. 分配/设置usb_driver */static struct usb_driver usbmouse_as_key_driver = {.name= "usbmouse_as_key_",.probe= usbmouse_as_key_probe,.disconnect= usbmouse_as_key_disconnect,.id_table= usbmouse_as_key_id_table,};static int usbmouse_as_key_init(void){/* 2. 注册 */usb_register(&usbmouse_as_key_driver);return 0;}static void usbmouse_as_key_exit(void){usb_deregister(&usbmouse_as_key_driver);}module_init(usbmouse_as_key_init);module_exit(usbmouse_as_key_exit);MODULE_LICENSE("GPL");