Nginx配置文件详细说明
来源:互联网 发布:等高线地图软件 编辑:程序博客网 时间:2024/06/11 11:00
在此记录下Nginx服务器nginx.conf的配置文件说明, 部分注释收集与网络.
#运行用户user www-data; #启动进程,通常设置成和cpu的数量相等worker_processes 1;#全局错误日志及PID文件error_log /var/log/nginx/error.log;pid /var/run/nginx.pid;#工作模式及连接数上限events { use epoll; #epoll是多路复用IO(I/O Multiplexing)中的一种方式,但是仅用于linux2.6以上内核,可以大大提高nginx的性能 worker_connections 1024;#单个后台worker process进程的最大并发链接数 # multi_accept on; }#设定http服务器,利用它的反向代理功能提供负载均衡支持http { #设定mime类型,类型由mime.type文件定义 include /etc/nginx/mime.types; default_type application/octet-stream; #设定日志格式 access_log /var/log/nginx/access.log; #sendfile 指令指定 nginx 是否调用 sendfile 函数(zero copy 方式)来输出文件,对于普通应用, #必须设为 on,如果用来进行下载等应用磁盘IO重负载应用,可设置为 off,以平衡磁盘与网络I/O处理速度,降低系统的uptime. sendfile on; #tcp_nopush on; #连接超时时间 #keepalive_timeout 0; keepalive_timeout 65; tcp_nodelay on; #开启gzip压缩 gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; #设定请求缓冲 client_header_buffer_size 1k; large_client_header_buffers 4 4k; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; #设定负载均衡的服务器列表 upstream mysvr { #weigth参数表示权值,权值越高被分配到的几率越大 #本机上的Squid开启3128端口 server 192.168.8.1:3128 weight=5; server 192.168.8.2:80 weight=1; server 192.168.8.3:80 weight=6; } server { #侦听80端口 listen 80; #定义使用www.xx.com访问 server_name www.xx.com; #设定本虚拟主机的访问日志 access_log logs/www.xx.com.access.log main; #默认请求 location / { root /root; #定义服务器的默认网站根目录位置 index index.php index.html index.htm; #定义首页索引文件的名称 fastcgi_pass www.xx.com; fastcgi_param SCRIPT_FILENAME $document_root/$fastcgi_script_name; include /etc/nginx/fastcgi_params; } # 定义错误提示页面 error_page 500 502 503 504 /50x.html; location = /50x.html { root /root; } #静态文件,nginx自己处理 location ~ ^/(images|javascript|js|css|flash|media|static)/ { root /var/www/virtual/htdocs; #过期30天,静态文件不怎么更新,过期可以设大一点,如果频繁更新,则可以设置得小一点。 expires 30d; } #PHP 脚本请求全部转发到 FastCGI处理. 使用FastCGI默认配置. location ~ \.php$ { root /root; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /home/www/www$fastcgi_script_name; include fastcgi_params; } #设定查看Nginx状态的地址 location /NginxStatus { stub_status on; access_log on; auth_basic "NginxStatus"; auth_basic_user_file conf/htpasswd; } #禁止访问 .htxxx 文件 location ~ /\.ht { deny all; } }}
以上是一些基本的配置,使用Nginx最大的好处就是负载均衡
如果要使用负载均衡的话,可以修改配置http节点如下:
#设定http服务器,利用它的反向代理功能提供负载均衡支持http { #设定mime类型,类型由mime.type文件定义 include /etc/nginx/mime.types; default_type application/octet-stream; #设定日志格式 access_log /var/log/nginx/access.log; #省略上文有的一些配置节点 #。。。。。。。。。。 #设定负载均衡的服务器列表 upstream mysvr { #weigth参数表示权值,权值越高被分配到的几率越大 server 192.168.8.1x:3128 weight=5;#本机上的Squid开启3128端口 server 192.168.8.2x:80 weight=1; server 192.168.8.3x:80 weight=6; } upstream mysvr2 { #weigth参数表示权值,权值越高被分配到的几率越大 server 192.168.8.x:80 weight=1; server 192.168.8.x:80 weight=6; } #第一个虚拟服务器 server { #侦听192.168.8.x的80端口 listen 80; server_name 192.168.8.x; #对aspx后缀的进行负载均衡请求 location ~ .*\.aspx$ { root /root; #定义服务器的默认网站根目录位置 index index.php index.html index.htm; #定义首页索引文件的名称 proxy_pass http://mysvr ;#请求转向mysvr 定义的服务器列表 #以下是一些反向代理的配置可删除. proxy_redirect off; #后端的Web服务器可以通过X-Forwarded-For获取用户真实IP proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size 10m; #允许客户端请求的最大单文件字节数 client_body_buffer_size 128k; #缓冲区代理缓冲用户端请求的最大字节数, proxy_connect_timeout 90; #nginx跟后端服务器连接超时时间(代理连接超时) proxy_send_timeout 90; #后端服务器数据回传时间(代理发送超时) proxy_read_timeout 90; #连接成功后,后端服务器响应时间(代理接收超时) proxy_buffer_size 4k; #设置代理服务器(nginx)保存用户头信息的缓冲区大小 proxy_buffers 4 32k; #proxy_buffers缓冲区,网页平均在32k以下的话,这样设置 proxy_busy_buffers_size 64k; #高负荷下缓冲大小(proxy_buffers*2) proxy_temp_file_write_size 64k; #设定缓存文件夹大小,大于这个值,将从upstream服务器传 } }}
完整示例
#运行用户user nobody;#启动进程,通常设置成和cpu的数量相等worker_processes 1;#全局错误日志及PID文件#error_log logs/error.log;#error_log logs/error.log notice;#error_log logs/error.log info;#pid logs/nginx.pid;#工作模式及连接数上限events { #epoll是多路复用IO(I/O Multiplexing)中的一种方式, #仅用于linux2.6以上内核,可以大大提高nginx的性能 use epoll; #单个后台worker process进程的最大并发链接数 worker_connections 1024; # 并发总数是 worker_processes 和 worker_connections 的乘积 # 即 max_clients = worker_processes * worker_connections # 在设置了反向代理的情况下,max_clients = worker_processes * worker_connections / 4 为什么 # 为什么上面反向代理要除以4,应该说是一个经验值 # 根据以上条件,正常情况下的Nginx Server可以应付的最大连接数为:4 * 8000 = 32000 # worker_connections 值的设置跟物理内存大小有关 # 因为并发受IO约束,max_clients的值须小于系统可以打开的最大文件数 # 而系统可以打开的最大文件数和内存大小成正比,一般1GB内存的机器上可以打开的文件数大约是10万左右 # 我们来看看360M内存的VPS可以打开的文件句柄数是多少: # $ cat /proc/sys/fs/file-max # 输出 34336 # 32000 < 34336,即并发连接总数小于系统可以打开的文件句柄总数,这样就在操作系统可以承受的范围之内 # 所以,worker_connections 的值需根据 worker_processes 进程数目和系统可以打开的最大文件总数进行适当地进行设置 # 使得并发总数小于操作系统可以打开的最大文件数目 # 其实质也就是根据主机的物理CPU和内存进行配置 # 当然,理论上的并发总数可能会和实际有所偏差,因为主机还有其他的工作进程需要消耗系统资源。 # ulimit -SHn 65535}http { #设定mime类型,类型由mime.type文件定义 include mime.types; default_type application/octet-stream; #设定日志格式 log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log logs/access.log main; #sendfile 指令指定 nginx 是否调用 sendfile 函数(zero copy 方式)来输出文件, #对于普通应用,必须设为 on, #如果用来进行下载等应用磁盘IO重负载应用,可设置为 off, #以平衡磁盘与网络I/O处理速度,降低系统的uptime. sendfile on; #tcp_nopush on; #连接超时时间 #keepalive_timeout 0; keepalive_timeout 65; tcp_nodelay on; #开启gzip压缩 gzip on; gzip_disable "MSIE [1-6]."; #设定请求缓冲 client_header_buffer_size 128k; large_client_header_buffers 4 128k; #设定虚拟主机配置 server { #侦听80端口 listen 80; #定义使用 www.nginx.cn访问 server_name www.nginx.cn; #定义服务器的默认网站根目录位置 root html; #设定本虚拟主机的访问日志 access_log logs/nginx.access.log main; #默认请求 location / { #定义首页索引文件的名称 index index.php index.html index.htm; } # 定义错误提示页面 error_page 500 502 503 504 /50x.html; location = /50x.html { } #静态文件,nginx自己处理 location ~ ^/(images|javascript|js|css|flash|media|static)/ { #过期30天,静态文件不怎么更新,过期可以设大一点, #如果频繁更新,则可以设置得小一点。 expires 30d; } #PHP 脚本请求全部转发到 FastCGI处理. 使用FastCGI默认配置. location ~ .php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } #禁止访问 .htxxx 文件 location ~ /.ht { deny all; } }}
0 0
- Nginx配置文件详细说明
- Nginx配置文件详细说明
- Nginx配置文件详细说明
- Nginx配置文件详细说明
- Nginx配置文件详细说明
- Nginx配置文件详细说明
- Nginx配置文件详细说明
- Nginx配置文件详细说明
- Nginx配置文件详细说明
- Nginx配置文件详细说明
- Nginx配置文件详细说明
- Nginx配置文件详细说明
- Nginx配置文件详细说明
- Nginx配置文件详细说明
- Nginx配置文件详细说明
- Nginx配置文件详细说明
- Nginx配置文件详细说明
- Nginx配置文件详细说明
- 存储设备类型图
- spring task 注解+xml的demo
- 09-散列3. Hashing - Hard Version (30)
- C++中的四种cast
- RHEL二十(管理SELINUX的安全性)
- Nginx配置文件详细说明
- 从零开始搭建SpringMVC框架以及最简单的 Hello World 实例
- android 收集已发布版本的错误信息(UncaughtExceptionHandler)
- KMP算法专题-1001
- Snail—UI学习之表视图TableView单行添加、删除和移动
- ios实现简单的计算器
- hdoj 2277 Change the ball【规律题】
- Is It A Tree?(POJ_1308)
- 数字图像学习0