hdu1160FatMouse's Speed DP
来源:互联网 发布:cf手游刷枪软件注册码 编辑:程序博客网 时间:2024/06/15 01:30
Problem Description
FatMouse believes that the fatter a mouse is, the faster it runs. To disprove this, you want to take the data on a collection of mice and put as large a subset of this data as possible into a sequence so that the weights are increasing, but the speeds are decreasing.
Input
Input contains data for a bunch of mice, one mouse per line, terminated by end of file.
The data for a particular mouse will consist of a pair of integers: the first representing its size in grams and the second representing its speed in centimeters per second. Both integers are between 1 and 10000. The data in each test case will contain information for at most 1000 mice.
Two mice may have the same weight, the same speed, or even the same weight and speed.
The data for a particular mouse will consist of a pair of integers: the first representing its size in grams and the second representing its speed in centimeters per second. Both integers are between 1 and 10000. The data in each test case will contain information for at most 1000 mice.
Two mice may have the same weight, the same speed, or even the same weight and speed.
Output
Your program should output a sequence of lines of data; the first line should contain a number n; the remaining n lines should each contain a single positive integer (each one representing a mouse). If these n integers are m[1], m[2],..., m[n] then it must be the case that
W[m[1]] < W[m[2]] < ... < W[m[n]]
and
S[m[1]] > S[m[2]] > ... > S[m[n]]
In order for the answer to be correct, n should be as large as possible.
All inequalities are strict: weights must be strictly increasing, and speeds must be strictly decreasing. There may be many correct outputs for a given input, your program only needs to find one.
W[m[1]] < W[m[2]] < ... < W[m[n]]
and
S[m[1]] > S[m[2]] > ... > S[m[n]]
In order for the answer to be correct, n should be as large as possible.
All inequalities are strict: weights must be strictly increasing, and speeds must be strictly decreasing. There may be many correct outputs for a given input, your program only needs to find one.
Sample Input
6008 13006000 2100500 20001000 40001100 30006000 20008000 14006000 12002000 1900
Sample Output
44597
超级易懂的题意 然而做了一天 状态快快调整啊啊啊啊啊 改了一天都没有debug成功 mark一下以后再说吧
AC的
#include<stdio.h>#include<algorithm>using namespace std;#define MAXN 1000struct Node{ int w,s;//重量和速度 int index;//最初的序号,避免排序后乱掉顺序,后面需要输出的 }mouse[MAXN+10];bool cmp(Node a,Node b)//先按照w从小到大排序,再按照y从大到小排序 { if(a.w<b.w) return 1; else if(a.w==b.w&&a.s>b.s)return 1; else return 0;} int dp[MAXN+10];//dp[i]表示以第i个数据结尾的符合要求的子列长度int pre[MAXN+10];//记录i对应的上一个数据int res[MAXN+10];//存放最终结果下标 int main(){ //freopen("test.in","r",stdin); //freopen("test.out","w",stdout); int i=1,j; while(scanf("%d%d",&mouse[i].w,&mouse[i].s)!=EOF) { dp[i]=1; pre[i]=0; mouse[i].index=i; i++; } int n=i-1; sort(mouse+1,mouse+1+n,cmp); int maxlen=0;//最长序列长度 int maxi;//最长序列的最后一个数下标 dp[1]=1; for(i=1;i<=n;i++) { for(j=1;j<i;j++) if(mouse[i].w>mouse[j].w&&mouse[i].s<mouse[j].s&&dp[j]+1>dp[i]) { dp[i]=dp[j]+1; pre[i]=j; if(dp[i]>maxlen) { maxi=i; maxlen=dp[i]; } } } int t=maxi; i=0; while(t!=0) { res[i++]=t; t=pre[t]; } printf("%d\n",i); while(i>0) { i--; printf("%d\n",mouse[res[i]].index); } return 0; }
WA的
#include <iostream>#include<cstdio>#include<cstring>#include<algorithm>using namespace std;struct mice{ int weight,speed,rank;}num[1010];bool cmp(mice a,mice b){ if(a.weight!=b.weight) return a.weight<b.weight; return a.speed>b.speed;}int dp[1010];int row[1010],res[1010];int main(){ //freopen("cin.txt","r",stdin); int total=1; while(~scanf("%d%d",&num[total].weight,&num[total].speed)) { num[total].rank=total++; } sort(num+1,num+total,cmp);/// //for(int i=1;i<total;i++) printf("%d ",num[i].weight); for(int i=0;i<=total;i++) dp[i]=1; memset(row,0,sizeof(row)); for(int i=1;i<total;i++) for(int j=1;j<i;j++) { if(num[i].weight>num[j].weight&&num[i].speed<num[j].speed&&dp[i]<dp[j]+1)/// { dp[i]=dp[j]+1; row[i]=j; }/// } int end=1; int maxn=0; for(int i=2;i<total;i++) if(maxn<dp[i]) { maxn=dp[i]; end=i; } int t=end; int k=0; while(t!=0) { res[k++]=t; t=row[t]; } printf("%d\n",k); while(k>0) { k--; printf("%d\n",num[res[k]].rank); } return 0;}
0 0
- hdu1160FatMouse's Speed DP
- HDU1160FatMouse's Speed
- 【DP】FatMouse's Speed
- FatMouse's Speed(dp)
- hdoj1160_FatMouse's Speed(dp)
- FatMouse's Speed(dp)
- zoj 1108 FatMouse's Speed(DP)
- hdu 1160 FatMouse's Speed (DP)
- hduoj1160,FatMouse's Speed,贪心+DP
- HDU 1160 FatMouse's Speed DP
- HDU 1160 FatMouse's Speed(DP)
- HDU 1160 FatMouse's Speed(dp)
- HDU 1160 FatMouse's Speed--经典DP
- HDU 1160 FatMouse's Speed DP题解
- HDU 1160 FatMouse's Speed(DP)
- HDU 1160 FatMouse's Speed(DP)
- hdu 1160 FatMouse's Speed dp
- 【HDU】 1160 FatMouse's Speed (DP)
- Adaboost特征值计算
- iOS学习 bounds
- 九度oj1004 A+B 给定两个整数A和B,其表示形式是:从个位开始,每三位数用逗号","隔开
- 弹幕技术
- Linux清除用户登录记录和命令历史方法
- hdu1160FatMouse's Speed DP
- HDU 5212
- 白话经典算法系列之七 堆与堆排序
- linux 开发板移植sqlite3数据库
- 理解快速傅里叶变换(FFT)算法
- 感想
- JSPWebShell的进一步提权
- R-字符串操作
- int open(const char * pathname, int flags); http://c.biancheng.net/cpp/html/238.html