manjao linux下玩转arduino

自从入手arduinon差不多半个月了，在window下几乎没有任何问题，下载，编程，编译，上传，运行。几乎没有任何问题。在linux编译成功，上传时下却总是提示找不到libncurses.so.5无法载入等错误信息，经过各种查找资料，终于搞定了。步骤如下：

（1）首先，由于我的系统永远是最新的，libncurses是6.0版本的，要找到libncures5版本的，终于在一台较老的chakra linux中找到了；分别拷贝到/usr/lib/和/usr/lib32/目录中，其中lib和lib64是一样的，lib32的32位的库目录

（2）接着，创建连接文件

cd /usr/lib/ 

ln -s libncurses.so.5 libtinfo.so.5

cd ../lib32/

ln -s libncurses.so.5 libtinfo.so.5

（3）最后就可以编译成功了。下面分享一个西游记中女儿情的程序：

软件部分：

#define NOTE_D0 -1
#define NOTE_D1 350
#define NOTE_D2 393
#define NOTE_D3 441
#define NOTE_D4 495
#define NOTE_D5 556
#define NOTE_D6 624
#define NOTE_D7 661


#define NOTE_DL1 175
#define NOTE_DL2 196
#define NOTE_DL3 221
#define NOTE_DL4 234
#define NOTE_DL5 262
#define NOTE_DL6 294
#define NOTE_DL7 330


#define NOTE_DH1 700
#define NOTE_DH2 786
#define NOTE_DH3 882
#define NOTE_DH4 935
#define NOTE_DH5 1049
#define NOTE_DH6 1178
#define NOTE_DH7 1322


#define WHOLE 1
#define HALF 0.5
#define QUARTER 0.25
#define EIGHTH 0.125
#define SIXTEENTH 0.0625


int tune[] = {
  NOTE_D0,NOTE_DL5,NOTE_DL6,NOTE_D1,NOTE_D2,NOTE_D3,NOTE_DL7,NOTE_DL6,NOTE_DL7,NOTE_DL5,NOTE_DL6,
  //1,0.5,0.5,1.5,0.5,0.75,0.25,0.25,0.25,0.5,2,
  NOTE_DL6,NOTE_D1,NOTE_D2,NOTE_D3,NOTE_D5,NOTE_D6,NOTE_D1,NOTE_D2,NOTE_D3,NOTE_D4,NOTE_D3,
  //1,0.5,0.5,1.5,0.5,0.5,0.5,0.25,0.25,0.5,2,
  NOTE_D3,NOTE_D3,NOTE_D5,NOTE_D6,NOTE_D5,NOTE_D6,NOTE_DL6,NOTE_D3,NOTE_D2,NOTE_D1,NOTE_D2,NOTE_D3,NOTE_DL5,NOTE_DL6,NOTE_DL7,NOTE_D3,NOTE_DL6,NOTE_DL6,NOTE_D1,NOTE_D1,
  //1,0.5,0.5,1.5,0.5,1,0.5,0.5,1.5,0.5,1,1,1.5,0.5,0.5,1,0.5,0.5,1.5,2,
  NOTE_D0,NOTE_D5,NOTE_D5,NOTE_D6,NOTE_DH1,NOTE_D7,NOTE_D6,NOTE_D5,NOTE_D6,NOTE_D6
  //0.5,0.5,0.5,0.5,0.5,1,0.25,0.25,2,2,
  NOTE_D0,NOTE_D5,NOTE_D5,NOTE_D6,NOTE_DH1,NOTE_D7,NOTE_D6,NOTE_D5,NOTE_D3,
  //0.5,0.5,0.5,0.5,0.5,1,0.25,0.25,2,
  NOTE_D3,NOTE_DL5,NOTE_DL6,NOTE_D1,NOTE_D2,NOTE_D3,NOTE_DL7,NOTE_DL6,NOTE_DL7,NOTE_DL5,NOTE_DL6,
  //1,0.5,0.5,1.5,0.5,0.75,0.25,0.25,0.25,0.5,2,
  NOTE_DL6,NOTE_D1,NOTE_D2,NOTE_D3,NOTE_D5,NOTE_D6,NOTE_D1,NOTE_D2,NOTE_D3,NOTE_D4,NOTE_D3,
  //1,0.5,0.5,1.5,0.5,0.5,0.5,0.25,0.25,0.5,2,
  NOTE_D3,NOTE_D3,NOTE_D5,NOTE_D6,NOTE_D5,NOTE_D6,NOTE_DL6,NOTE_D3,NOTE_D2,NOTE_D1,
  //1,0.5,0.5,1.5,0.5,1,0.5,0.5,1.5,0.5,
  NOTE_D2,NOTE_D3,NOTE_DL5,NOTE_DL6,NOTE_DL7,NOTE_D3,NOTE_DL6,NOTE_DL6,NOTE_D1,NOTE_D1,
  //1,1,1.5,0.5,0.5,1,0.5,0.5,1.5,2,
};


float duration[] = {
  1,0.5,0.5,1.5,0.5,0.75,0.25,0.25,0.25,0.5,2,
  1,0.5,0.5,1.5,0.5,0.5,0.5,0.25,0.25,0.5,2,
  1,0.5,0.5,1.5,0.5,1,0.5,0.5,1.5,0.5,1,1,1.5,0.5,0.5,1,0.5,0.5,1.5,2,
  0.5,0.5,0.5,0.5,0.5,1,0.25,0.25,2,2,
  0.5,0.5,0.5,0.5,0.5,1,0.25,0.25,2,
  1,0.5,0.5,1.5,0.5,0.75,0.25,0.25,0.25,0.5,2,
  1,0.5,0.5,1.5,0.5,0.5,0.5,0.25,0.25,0.5,2,
  1,0.5,0.5,1.5,0.5,1,0.5,0.5,1.5,0.5,
  1,1,1.5,0.5,0.5,1,0.5,0.5,1.5,2,
};


  int length;
  int tonePin = 5;
void setup() {
  // put your setup code here, to run once:
  pinMode(tonePin, OUTPUT);
  length = sizeof(tune) / sizeof(tune[0]);
}

硬件连接非常简单，只要将数字接口5连接到喇叭的正，喇叭的负接地即可。