虚拟机VMware安装OracleRAC.RedHat Enterprise AS4再次安装10gRAC
来源：互联网 发布：网络自动打电话 编辑：程序博客网 时间：2024/06/04 19:20
虚拟机VMware安装OracleRAC.RedHat Enterprise AS4再次安装Oracle10g RAC(完整版)
草木瓜 20080329
一、硬件环境
笔记本配置->
内存：Physical Memory Total 1527 MB
处理器：CPU Type Mobile Intel Pentium M 740, 1733 MHz (13 x 133)
硬盘：Driver Description TOSHIBA MK6032GAX 60G
配置推荐->
硬盘 推荐空闲空间 17G 本机使用情况如下
7G(虚拟机1)+7G(虚拟机2)+1.5G(共享磁盘)+1.5G(安装文件)
内存 推荐1.5G以上
最为重要的配置就是内存，建议1.5G或以上。1G内存不仅会速度奇慢，而且在安装过程中
会出现各种奇怪的错误。错误列举：
a.安装过程中虚拟机无故重启或关机
b.安装过程中提示复制文件出错或超时
c.整个安装创建过程中无任何错误，但最后数据库服务启动失败，即如下进程有些不能
正常启动，crs_stop crs_start srvctl 等命令均无效，提示失败。
NAME=ora.liwei.db
TYPE=application
TARGET=ONLINE
STATE=ONLINE on linuxrac2
NAME=ora.liwei.liwei.cs
TYPE=application
TARGET=ONLINE
STATE=ONLINE on linuxrac1
NAME=ora.liwei.liwei.liwei1.srv
TYPE=application
TARGET=ONLINE
STATE=ONLINE on linuxrac1
NAME=ora.liwei.liwei.liwei2.srv
TYPE=application
TARGET=ONLINE
STATE=ONLINE on linuxrac2
NAME=ora.liwei.liwei1.inst
TYPE=application
TARGET=ONLINE
STATE=ONLINE on linuxrac1
NAME=ora.liwei.liwei2.inst
TYPE=application
TARGET=ONLINE
STATE=ONLINE on linuxrac2
但可以通过sqlplus "/ as sysdba"正常启动关闭数据库，RAC数据库测试也是正常的。
d.启动CRS后，crs_stat看到部分进程为UNKNOWN,须要手工STOP再START。
二、软件环境
虚拟机版本：
VMware WorkStation 6.0.3 build-80004
注意：VMWare WorkStation 是完全可以设置使用共享磁盘来安装RAC的。具体内容见
本文<五、共享磁盘>一节。
安装Linux版本：
[root@linuxrac6 etc]# lsb_release -a
LSB Version: :core-3.0-ia32:core-3.0-noarch:graphics-3.0-ia32:graphics-3.0-noarch
Distributor ID: RedHatEnterpriseAS
Description: Red Hat Enterprise Linux AS release 4 (Nahant Update 2)
Release: 4
Codename: NahantUpdate2
[root@linuxrac6 etc]# uname -a
Linux linuxrac6 2.6.9-22.EL #1 Mon Sep 19 18:20:28 EDT 2005 i686 i686 i386 GNU/Linux
虚拟主机 双节点名称：
linuxrac1
linuxrac2
虚拟主机 IP配置信息(/etc/hosts)：
[root@linuxrac1 oradata]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
134.98.105.170 linuxrac1
134.98.105.171 linuxrac2
192.168.0.6 linuxrac1-priv
192.168.0.9 linuxrac2-priv
134.98.105.233 linuxrac1-vip
134.98.105.232 linuxrac2-vip
其网络上不能存在VIP IP地址冲突，否则ora.linuxrac1.vip之类进程会启动失败，可见相关
日志。
[root@linuxrac2 ~]# free -m
mkswap /dev/sdb1
swapon /dev/sdb1
/dev/sdb1 swap swap defaults 0 0
三、创建虚拟机
关于虚拟机创建，重要一点是尽量选择Allocate all disk space now ,提升了性能和稳定性，
也会避免一些空间扩展的麻烦或BUG。
四、安装虚拟机操作系统
须要特别提出的是，安装操作系统时设置交换分区要尽量大，推荐空间768M以上，否则在后续
安装时速度会很慢。
五、设置共享磁盘
创建方法见《虚拟机VMware安装OracleRAC.环境综述》<七、设置共享磁盘>一节。
创建后要保证两台节点机可共享访问，必须修改LinuxRac1.vmx配置文件，加入如下内容：
diskLib.dataCacheMaxSize=0
diskLib.dataCacheMaxReadAheadSize=0
diskLib.dataCacheMinReadAheadSize=0
diskLib.dataCachePageSize=4096
diskLib.maxUnsyncedWrites = "0"
disk.locking = "FALSE"
scsi1.sharedBus = "virtual"
scsi1.present = "TRUE"
scsi1.virtualDev = "lsilogic"
scsi1:0.mode = "independent-persistent"
scsi1:0.deviceType = "disk"
scsi1:0.present = "TRUE"
scsi1:0.fileName = "E:/VMDISK/RACDATA.vmdk"
E:/VMDISK/RACDATA.vmdk即创建的共享磁盘。原英文如下：
#
# ----------------------------------------------------------------
# SHARED DISK SECTION - (BEGIN)
# ----------------------------------------------------------------
# - The goal in meeting the hardware requirements is to have a
# shared storage for the two nodes. The way to achieve this in
# VMware is the creation of a NEW SCSI BUS. It has to be of
# type "virtual" and we must have the disk.locking = "false"
# option.
# - Just dataCacheMaxSize = "0" should be sufficient with the
# diskLib.* parameters, although I include all parameters for
# documentation purposes.
# - maxUnsyncedWrites should matter for sparse disks only, and
# I certainly do not recommend using sparse disks for
# clustering.
# - dataCacheMaxSize=0 should disable cache size completely, so
# other three dataCache options should do nothing (no harm,
# but nothing good either).
# ----------------------------------------------------------------
#
diskLib.dataCacheMaxSize = "0"
diskLib.dataCacheMaxReadAheadSize = "0"
diskLib.dataCacheMinReadAheadSize = "0"
diskLib.dataCachePageSize = "4096"
diskLib.maxUnsyncedWrites = "0"
disk.locking = "false"
# ----------------------------------------------------------------
# Create one HBA
# ----------------------------------------------------------------
scsi1.present = "TRUE"
scsi1.sharedBus = "virtual"
scsi1.virtualDev = "lsilogic"
# ----------------------------------------------------------------
# Create virtual SCSI disks on single HBA
# ----------------------------------------------------------------
scsi1:0.present = "TRUE"
scsi1:0.fileName = "M:/My Virtual Machines/Workstation 5.5.3/vmlinux1/Disk1.vmdk"
scsi1:0.redo = ""
scsi1:0.mode = "independent-persistent"
scsi1:0.deviceType = "disk"
VMWare WorkStation 是绝对可以使用共享磁盘的，至于启动提示Clustering is not
Supported for VMWare WorkStation，完全可以忽略之。对于网络上声称VMWare WorkStation
不能使用共享磁盘的一些文章，也同样忽略之。
笔者推荐使用VMWare WorkStation 6.0安装Oracle 10g RAC。
六、配置双机环境
推荐配置顺序如下：
(1) 设置启动服务 ，安装rsh和ssh，配置hangcheck-time
详细内容请查看
《虚拟机VMware安装OracleRAC.环境综述》
<四、使用虚拟机Linux操作系统> -------设置启动的服务，安装rsh和ssh
《虚拟机VMware安装OracleRAC.RedHat Enterprise AS4安装Oracle10g RAC》
<六、设置节点机ORACLE的安装环境(各节点皆须设置)>
4.配置hangcheck-timer -------配置hangcheck-time
(2) 关闭机器，挂载共享磁盘和分区，创建双网卡，开机，设置/etc/hosts
详细内容请查看
《虚拟机VMware安装OracleRAC.环境综述》
<七、设置共享磁盘> -------挂载共享磁盘和分区
<六、配置双机环境>
A.双网卡 -------创建双网卡
B.节点间hosts文件配置 -------设置/etc/hosts
附本次环境/etc/hosts内容：
[root@linuxrac1 oradata]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
134.98.105.170 linuxrac1
134.98.105.171 linuxrac2
192.168.0.6 linuxrac1-priv
192.168.0.9 linuxrac2-priv
134.98.105.233 linuxrac1-vip
134.98.105.232 linuxrac2-vip
(3) 安装配置ocfs2
详细内容请查看
《虚拟机VMware安装OracleRAC.RedHat Enterprise AS4安装Oracle10g RAC》
<四、安装配置OCFS2(oracle cluster file system)共享文件系统>
<五、格式化与自动挂载> -------安装配置ocfs2
附本次环境cluster.conf内容：
[oracle@linuxrac1 bin]$ cat /etc/ocfs2/cluster.conf
cluster:
node_count = 2
name = ocfs2
node:
ip_port = 7777
ip_address = 134.98.105.170
number = 0
name = linuxrac1
cluster = ocfs2
node:
ip_port = 7777
ip_address = 134.98.105.171
number = 1
name = linuxrac2
cluster = ocfs2
(4) 设置内核参数
详细内容请查看
《虚拟机VMware安装OracleRAC.RedHat Enterprise AS4安装Oracle10g RAC》
<六、设置节点机ORACLE的安装环境(各节点皆须设置)>
1.设置内核参数 -------设置内核参数
(5) 创建oracle用户组，设置root,oracle环境变量
详细内容请查看
《虚拟机VMware安装OracleRAC.RedHat Enterprise AS4安装Oracle10g RAC》
<六、设置节点机ORACLE的安装环境(各节点皆须设置)>
2.添加用户组 -------创建oracle用户组
3. .bash_profile 设置 -------设置root,oracle环境变量
附本次环境.bash_profile内容，root用户相同设置：
[oracle@linuxrac1 bin]$ cd
[oracle@linuxrac1 ~]$ vi .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
#ORACLE
export LD_ASSUME_KERNEL=2.4.1
export ORACLE_BASE=/oracle
export ORACLE_HOME=$ORACLE_BASE/crs #先装CRS，后台DB
export ORACLE_SID=liwei1
export CRS_HOME=$ORACLE_BASE/crs
export ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
#LIB,CLASS
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
export LD_LIBRARY_PATH
export PATH=$PATH:$ORACLE_HOME/bin:$CRS_HOME/bin
CLASSPATH=$CLASSPATH:$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib
CLASSPATH=$CLASSPATH:$ORACLE_HOME/network/jlib
export CLASSPATH
unset USERNAME
(6) 复制另一台节点，配置两台机器的双网卡，测试/etc/hosts除VIP部分是否都可以ping通
复制后，须要修改export ORACLE_SID=liwei1部分。
(7) 配置rsh和ssh信任机制，配置节点机时间同步
详细内容请查看
《虚拟机VMware安装OracleRAC.环境综述》
<六、配置双机环境>
C.节点间访问配置 -------配置rsh和ssh信任机制
D.节点间时间同步 -------配置时间同步
七、安装CRS
见《虚拟机VMware安装OracleRAC.RedHat Enterprise AS4安装Oracle10g RAC》
<八、使用Oracle安装介质安装CRS>
<九. 处理安装CRS失败>
八、安装DB
见《虚拟机VMware安装OracleRAC.RedHat Enterprise AS4安装Oracle10g RAC》
<十. 使用Oracle安装介质安装Database>
<十一、处理安装Database失败>
九、配置监听
见《虚拟机VMware安装OracleRAC.RedHat Enterprise AS4安装Oracle10g RAC》
<十二、配置监听>
十、创建数据库
见《虚拟机VMware安装OracleRAC.RedHat Enterprise AS4安装Oracle10g RAC》
<十三、创建数据库>
完成后，crs_stat 显示如下：
[oracle@linuxrac1 ~]$ crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora....C1.lsnr application ONLINE ONLINE linuxrac1
ora....ac1.gsd application ONLINE ONLINE linuxrac1
ora....ac1.ons application ONLINE ONLINE linuxrac1
ora....ac1.vip application ONLINE ONLINE linuxrac1
ora....C2.lsnr application ONLINE ONLINE linuxrac2
ora....ac2.gsd application ONLINE ONLINE linuxrac2
ora....ac2.ons application ONLINE ONLINE linuxrac2
ora....ac2.vip application ONLINE ONLINE linuxrac2
ora.liwei.db application ONLINE ONLINE linuxrac2
ora....iwei.cs application ONLINE ONLINE linuxrac1
ora....ei1.srv application ONLINE ONLINE linuxrac1
ora....ei2.srv application ONLINE ONLINE linuxrac2
ora....i1.inst application ONLINE ONLINE linuxrac1
ora....i2.inst application ONLINE ONLINE linuxrac2
十一、关闭数据库过程(示例)
(1) 关闭实例liwei1
[oracle@linuxrac1 ~]$ srvctl stop instance -d liwei -i liwei1
[oracle@linuxrac1 ~]$ crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora....C1.lsnr application ONLINE ONLINE linuxrac1
ora....ac1.gsd application ONLINE ONLINE linuxrac1
ora....ac1.ons application ONLINE ONLINE linuxrac1
ora....ac1.vip application ONLINE ONLINE linuxrac1
ora....C2.lsnr application ONLINE ONLINE linuxrac2
ora....ac2.gsd application ONLINE ONLINE linuxrac2
ora....ac2.ons application ONLINE ONLINE linuxrac2
ora....ac2.vip application ONLINE ONLINE linuxrac2
ora.liwei.db application ONLINE ONLINE linuxrac2
ora....iwei.cs application ONLINE ONLINE linuxrac1
ora....ei1.srv application ONLINE OFFLINE
ora....ei2.srv application ONLINE ONLINE linuxrac2
ora....i1.inst application OFFLINE OFFLINE
ora....i2.inst application ONLINE ONLINE linuxrac2
(2) 关闭实例liwei2
[oracle@linuxrac1 ~]$ srvctl stop instance -d liwei -i liwei2
[oracle@linuxrac1 ~]$ crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora....C1.lsnr application ONLINE ONLINE linuxrac1
ora....ac1.gsd application ONLINE ONLINE linuxrac1
ora....ac1.ons application ONLINE ONLINE linuxrac1
ora....ac1.vip application ONLINE ONLINE linuxrac1
ora....C2.lsnr application ONLINE ONLINE linuxrac2
ora....ac2.gsd application ONLINE ONLINE linuxrac2
ora....ac2.ons application ONLINE ONLINE linuxrac2
ora....ac2.vip application ONLINE ONLINE linuxrac2
ora.liwei.db application OFFLINE OFFLINE
ora....iwei.cs application OFFLINE OFFLINE
ora....ei1.srv application OFFLINE OFFLINE
ora....ei2.srv application OFFLINE OFFLINE
ora....i1.inst application OFFLINE OFFLINE
ora....i2.inst application OFFLINE OFFLINE
(3) 关闭linuxrac1的crs应用
[oracle@linuxrac1 ~]$ srvctl stop nodeapps -n linuxrac1
[oracle@linuxrac1 ~]$ crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora....C1.lsnr application OFFLINE OFFLINE
ora....ac1.gsd application OFFLINE OFFLINE
ora....ac1.ons application OFFLINE OFFLINE
ora....ac1.vip application OFFLINE OFFLINE
ora....C2.lsnr application ONLINE ONLINE linuxrac2
ora....ac2.gsd application ONLINE ONLINE linuxrac2
ora....ac2.ons application ONLINE ONLINE linuxrac2
ora....ac2.vip application ONLINE ONLINE linuxrac2
ora.liwei.db application OFFLINE OFFLINE
ora....iwei.cs application OFFLINE OFFLINE
ora....ei1.srv application OFFLINE OFFLINE
ora....ei2.srv application OFFLINE OFFLINE
ora....i1.inst application OFFLINE OFFLINE
ora....i2.inst application OFFLINE OFFLINE
(4) 关闭linuxrac2的crs应用
[oracle@linuxrac1 ~]$ srvctl stop nodeapps -n linuxrac2
[oracle@linuxrac1 ~]$ crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora....C1.lsnr application OFFLINE OFFLINE
ora....ac1.gsd application OFFLINE OFFLINE
ora....ac1.ons application OFFLINE OFFLINE
ora....ac1.vip application OFFLINE OFFLINE
ora....C2.lsnr application OFFLINE OFFLINE
ora....ac2.gsd application OFFLINE OFFLINE
ora....ac2.ons application OFFLINE OFFLINE
ora....ac2.vip application OFFLINE OFFLINE
ora.liwei.db application OFFLINE OFFLINE
ora....iwei.cs application OFFLINE OFFLINE
ora....ei1.srv application OFFLINE OFFLINE
ora....ei2.srv application OFFLINE OFFLINE
ora....i1.inst application OFFLINE OFFLINE
ora....i2.inst application OFFLINE OFFLINE
(5) 停止双机CRS进程(双机root执行)
[root@linuxrac1 ~]# crsctl check crs
CSS appears healthy
CRS appears healthy
EVM appears healthy
[root@linuxrac1 ~]# crsctl stop crs
Stopping resources.
Successfully stopped CRS resources
Stopping CSSD.
Shutting down CSS daemon.
Shutdown request successfully issued.
[root@linuxrac1 ~]#
ps -ef 显示CRS只有类似如下进程
root 18043 1 1 18:16 ? 00:00:00 /bin/sh /etc/init.d/init.crsd run
root 18045 1 0 18:16 ? 00:00:00 /bin/sh /etc/init.d/init.evmd run
root 18095 1 1 18:16 ? 00:00:00 /bin/sh /etc/init.d/init.cssd fatal
root 18171 18045 0 18:16 ? 00:00:00 /bin/sleep 30
root 18186 18095 0 18:16 ? 00:00:00 /bin/sleep 30
root 18230 18043 0 18:16 ? 00:00:00 /bin/sleep 30
(6) 停止双机(双机root执行)
[root@linuxrac1 ~]# poweroff
Broadcast message from root (pts/3) (Mon Apr 7 19:10:39 2008):
The system is going down for system halt NOW!
十二、启动单机(示例)
[root@linuxrac1 ~]# crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora....C1.lsnr application ONLINE ONLINE linuxrac1
ora....ac1.gsd application ONLINE ONLINE linuxrac1
ora....ac1.ons application ONLINE ONLINE linuxrac1
ora....ac1.vip application ONLINE ONLINE linuxrac1
ora....C2.lsnr application ONLINE OFFLINE
ora....ac2.gsd application ONLINE OFFLINE
ora....ac2.ons application ONLINE OFFLINE
ora....ac2.vip application ONLINE ONLINE linuxrac1
ora.liwei.db application ONLINE ONLINE linuxrac1
ora....iwei.cs application ONLINE ONLINE linuxrac1
ora....ei1.srv application ONLINE ONLINE linuxrac1
ora....ei2.srv application OFFLINE OFFLINE
ora....i1.inst application ONLINE ONLINE linuxrac1
ora....i2.inst application ONLINE OFFLINE
十三、单机失去网络连接(示例)
(1) 失去网络连接 lsnr vip 进程停掉
[root@linuxrac1 ~]# crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora....C1.lsnr application ONLINE OFFLINE
ora....ac1.gsd application ONLINE ONLINE linuxrac1
ora....ac1.ons application ONLINE ONLINE linuxrac1
ora....ac1.vip application ONLINE OFFLINE
ora....C2.lsnr application ONLINE OFFLINE
ora....ac2.gsd application ONLINE OFFLINE
ora....ac2.ons application ONLINE OFFLINE
ora....ac2.vip application ONLINE OFFLINE
ora.liwei.db application OFFLINE OFFLINE
ora....iwei.cs application ONLINE ONLINE linuxrac1
ora....ei1.srv application ONLINE ONLINE linuxrac1
ora....ei2.srv application ONLINE OFFLINE
ora....i1.inst application ONLINE OFFLINE
ora....i2.inst application ONLINE OFFLINE
(2) 停止服务与实例
[root@linuxrac1 ~]# srvctl stop service -h
[root@linuxrac1 ~]# crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora....C1.lsnr application ONLINE OFFLINE
ora....ac1.gsd application ONLINE ONLINE linuxrac1
ora....ac1.ons application ONLINE ONLINE linuxrac1
ora....ac1.vip application ONLINE OFFLINE
ora....C2.lsnr application ONLINE OFFLINE
ora....ac2.gsd application ONLINE OFFLINE
ora....ac2.ons application ONLINE OFFLINE
ora....ac2.vip application ONLINE OFFLINE
ora.liwei.db application OFFLINE OFFLINE
ora....iwei.cs application OFFLINE OFFLINE
ora....ei1.srv application OFFLINE OFFLINE
ora....ei2.srv application OFFLINE OFFLINE
ora....i1.inst application ONLINE OFFLINE
ora....i2.inst application ONLINE OFFLINE
(3) 停止CRS应用
[root@linuxrac1 ~]# srvctl stop nodeapps -n linuxrac1
[root@linuxrac1 ~]# crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora....C1.lsnr application OFFLINE OFFLINE
ora....ac1.gsd application OFFLINE OFFLINE
ora....ac1.ons application OFFLINE OFFLINE
ora....ac1.vip application OFFLINE OFFLINE
ora....C2.lsnr application ONLINE OFFLINE
ora....ac2.gsd application ONLINE OFFLINE
ora....ac2.ons application ONLINE OFFLINE
ora....ac2.vip application ONLINE OFFLINE
ora.liwei.db application OFFLINE OFFLINE
ora....iwei.cs application OFFLINE OFFLINE
ora....ei1.srv application OFFLINE OFFLINE
ora....ei2.srv application OFFLINE OFFLINE
ora....i1.inst application OFFLINE OFFLINE
ora....i2.inst application ONLINE OFFLINE
(4) 启动CRS应用
[root@linuxrac1 ~]# srvctl start nodeapps -n linuxrac1
[root@linuxrac1 ~]# crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora....C1.lsnr application ONLINE ONLINE linuxrac1
ora....ac1.gsd application ONLINE ONLINE linuxrac1
ora....ac1.ons application ONLINE ONLINE linuxrac1
ora....ac1.vip application ONLINE ONLINE linuxrac1
ora....C2.lsnr application ONLINE OFFLINE
ora....ac2.gsd application ONLINE OFFLINE
ora....ac2.ons application ONLINE OFFLINE
ora....ac2.vip application ONLINE OFFLINE
ora.liwei.db application OFFLINE OFFLINE
ora....iwei.cs application OFFLINE OFFLINE
ora....ei1.srv application OFFLINE OFFLINE
ora....ei2.srv application OFFLINE OFFLINE
ora....i1.inst application OFFLINE OFFLINE
ora....i2.inst application ONLINE OFFLINE
(5) 启动服务与实例
[root@linuxrac1 ~]# srvctl start service -d liwei
[root@linuxrac1 ~]# crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora....C1.lsnr application ONLINE ONLINE linuxrac1
ora....ac1.gsd application ONLINE ONLINE linuxrac1
ora....ac1.ons application ONLINE ONLINE linuxrac1
ora....ac1.vip application ONLINE ONLINE linuxrac1
ora....C2.lsnr application ONLINE OFFLINE
ora....ac2.gsd application ONLINE OFFLINE
ora....ac2.ons application ONLINE OFFLINE
ora....ac2.vip application ONLINE OFFLINE
ora.liwei.db application ONLINE ONLINE linuxrac1
ora....iwei.cs application ONLINE ONLINE linuxrac1
ora....ei1.srv application ONLINE ONLINE linuxrac1
ora....ei2.srv application OFFLINE OFFLINE
ora....i1.inst application ONLINE ONLINE linuxrac1
ora....i2.inst application ONLINE OFFLINE
- 虚拟机VMware安装OracleRAC.RedHat Enterprise AS4再次安装10gRAC
- 虚拟机VMware安装OracleRAC.RedHat Enterprise AS4安装Oracle10g RAC
- 虚拟机VMware安装OracleRAC.RedHat Enterprise AS4安装Oracle10g RAC
- 虚拟机VMware安装OracleRAC.RedHat Enterprise AS4安装Oracle 9i RAC
- 虚拟机VMware安装OracleRAC.RedHat Enterprise AS4安装Oracle 9206 Patch
- 虚拟机VMware安装OracleRAC.环境综述
- Oracle 10gR2 + RedHat Enterprise Linux AS4 安装
- Oracle 10gR2 + RedHat Enterprise Linux AS4 安装
- 最近安装redhat enterprise as4 的感受！
- RedHat Enterprise Linux AS4 安装oracle9i
- Redhat-Linux-Enterprise-AS4-Up2上安装Oracle amd64_db_9204
- Oracle 9iR2 for RedHat Enterprise Linux AS4的安装
- RedHat AS4安装
- RedHat AS4安装yum
- redhat AS4安装yum
- RedHat虚拟机安装VMware Tools
- Oracle RAC安装[VMWare+Redhat AS4+裸磁盘]
- Oracle RAC安装[VMWare+Redhat AS4+裸磁盘]
- 快速学习数据库不得不知的八个方面
- KMP算法(求模式串的next及nextval值)
- 领导的职责
- 页面跳转javascript 实现
- Josephus问题求解
- 虚拟机VMware安装OracleRAC.RedHat Enterprise AS4再次安装10gRAC
- CodeSmith自动生成业务实体类的模板代码
- 完整的Flash Object参考
- JCE的配置
- nirvana2008
- 写在Groovy/Grails栏目开通的话
- 创建xmldocument对象,并读取xml，绑定到select， ie/ff通用
- 关于Gtkmm窗口指针的delete 以及窗口的hide()方法和destroy_()方法
- 2G资源
