windows 7下，给android ndk编译libcurl

首先，自己安卓项目的Android.mk里增加

LOCAL_WHOLE_STATIC_LIBRARIES := wxsqlite3_static curl


include $(BUILD_SHARED_LIBRARY)
include $(LOCAL_PATH)/../../wxsqlite3-3.2.1/sqlite3/secure/Android.mk \
$(LOCAL_PATH)/../../curl-7.45.0/packages/Android/Android.mk

然后是：curl-7.45.0\packages\Android\Android.mk 改为：

# Google Android makefile for curl and libcurl## This file can be used when building curl using the full Android source# release or the NDK. Most users do not want or need to do this; please# instead read the Android section in docs/INSTALL for alternate# methods.## Place the curl source (including this makefile) into external/curl/ in the# Android source tree.  Then build them with 'make curl' or just 'make libcurl'# from the Android root. Tested with Android versions 1.5, 2.1-2.3## Note: you must first create a curl_config.h file by running configure in the# Android environment. The only way I've found to do this is tricky. Perform a# normal Android build with libcurl in the source tree, providing the target# "showcommands" to make. The build will eventually fail (because curl_config.h# doesn't exist yet), but the compiler commands used to build curl will be# shown. Now, from the external/curl/ directory, run curl's normal configure# command with flags that match what Android itself uses. This will mean# putting the compiler directory into the PATH, putting the -I, -isystem and# -D options into CPPFLAGS, putting the -W, -m, -f, -O and -nostdlib options# into CFLAGS, and putting the -Wl, -L and -l options into LIBS, along with the# path to the files libgcc.a, crtbegin_dynamic.o, and ccrtend_android.o.# Remember that the paths must be absolute since you will not be running# configure from the same directory as the Android make.  The normal# cross-compiler options must also be set. Note that the -c, -o, -MD and# similar flags must not be set.## To see all the LIBS options, you'll need to do the "showcommands" trick on an# executable that's already buildable and watch what flags Android uses to link# it (dhcpcd is a good choice to watch). You'll also want to add -L options to# LIBS that point to the out/.../obj/lib/ and out/.../obj/system/lib/# directories so that additional libraries can be found and used by curl.## The end result will be a configure command that looks something like this# (the environment variable A is set to the Android root path which makes the# command shorter):##  A=`realpath ../..` && \#  PATH="$A/prebuilt/linux-x86/toolchain/arm-eabi-X/bin:$PATH" \#  ./configure --host=arm-linux CC=arm-eabi-gcc \#  CPPFLAGS="-I $A/system/core/include ..." \#  CFLAGS="-nostdlib -fno-exceptions -Wno-multichar ..." \#  LIBS="$A/prebuilt/linux-x86/toolchain/arm-eabi-X/lib/gcc/arm-eabi/X\#  /interwork/libgcc.a ..."## Finally, copy the file COPYING to NOTICE so that the curl license gets put# into the right place (but see the note about this below).## Dan Fandrich# November 2011LOCAL_PATH:= $(call my-dir)/../..common_CFLAGS := -Wpointer-arith -Wwrite-strings -Wunused -Winline -Wnested-externs -Wmissing-declarations -Wmissing-prototypes -Wno-long-long -Wfloat-equal -Wno-multichar -Wsign-compare -Wno-format-nonliteral -Wendif-labels -Wstrict-prototypes -Wdeclaration-after-statement -Wno-system-headers -DHAVE_CONFIG_H########################## Build the libcurl libraryinclude $(CLEAR_VARS)include $(LOCAL_PATH)/lib/Makefile.incCURL_HEADERS := \curlbuild.h \curl.h \curlrules.h \curlver.h \easy.h \mprintf.h \multi.h \stdcheaders.h \typecheck-gcc.hLOCAL_SRC_FILES := $(addprefix lib/,$(CSOURCES))LOCAL_C_INCLUDES += $(LOCAL_PATH)/include/LOCAL_C_INCLUDES += $(LOCAL_PATH)/libLOCAL_CFLAGS += $(common_CFLAGS)LOCAL_COPY_HEADERS_TO := libcurl/curlLOCAL_COPY_HEADERS := $(addprefix include/curl/,$(CURL_HEADERS))LOCAL_MODULE:= libcurlLOCAL_MODULE_TAGS := optional# Copy the licence to a place where Android will find it.# Actually, this doesn't quite work because the build system searches# for NOTICE files before it gets to this point, so it will only be seen# on subsequent builds.ALL_PREBUILT += $(LOCAL_PATH)/NOTICE$(LOCAL_PATH)/NOTICE: $(LOCAL_PATH)/COPYING | $(ACP)$(copy-file-to-target)include $(BUILD_STATIC_LIBRARY)########################## Build the curl binary#include $(CLEAR_VARS)#include $(LOCAL_PATH)/src/Makefile.inc#LOCAL_SRC_FILES := $(addprefix src/,$(CURL_CFILES))##LOCAL_MODULE := curl#LOCAL_MODULE_TAGS := optional#LOCAL_STATIC_LIBRARIES := libcurl#LOCAL_SYSTEM_SHARED_LIBRARIES := libc##LOCAL_C_INCLUDES += $(LOCAL_PATH)/include $(LOCAL_PATH)/lib### This may also need to include $(CURLX_CFILES) in order to correctly link## if libcurl is changed to be built as a dynamic library#LOCAL_CFLAGS += $(common_CFLAGS)##include $(BUILD_EXECUTABLE)#

最后是curl-7.45.0\lib\curl_config.h

/* lib/curl_config.h.  Generated from curl_config.h.in by configure.  *//* lib/curl_config.h.in.  Generated from configure.ac by autoheader.  *//* Location of default ca bundle *//* #undef CURL_CA_BUNDLE *//* Location of default ca path *//* #undef CURL_CA_PATH *//* to disable cookies support *//* #undef CURL_DISABLE_COOKIES *//* to disable cryptographic authentication *//* #undef CURL_DISABLE_CRYPTO_AUTH *//* to disable DICT *//* #undef CURL_DISABLE_DICT *//* to disable FILE *//* #undef CURL_DISABLE_FILE *//* to disable FTP *//* #undef CURL_DISABLE_FTP *//* to disable Gopher *//* #undef CURL_DISABLE_GOPHER *//* to disable HTTP *//* #undef CURL_DISABLE_HTTP *//* to disable IMAP *//* #undef CURL_DISABLE_IMAP *//* to disable LDAP *//* #undef CURL_DISABLE_LDAP */#define CURL_DISABLE_LDAP/* to disable LDAPS *//* #undef CURL_DISABLE_LDAPS *//* to disable --libcurl C code generation option *//* #undef CURL_DISABLE_LIBCURL_OPTION *//* to disable POP3 *//* #undef CURL_DISABLE_POP3 *//* to disable proxies *//* #undef CURL_DISABLE_PROXY *//* to disable RTSP *//* #undef CURL_DISABLE_RTSP *//* to disable SMB/CIFS *//* #undef CURL_DISABLE_SMB *//* to disable SMTP *//* #undef CURL_DISABLE_SMTP *//* to disable TELNET *//* #undef CURL_DISABLE_TELNET *//* to disable TFTP *//* #undef CURL_DISABLE_TFTP *//* to disable TLS-SRP authentication *//* #undef CURL_DISABLE_TLS_SRP *//* to disable verbose strings *//* #undef CURL_DISABLE_VERBOSE_STRINGS *//* Definition to make a library symbol externally visible. */#define CURL_EXTERN_SYMBOL __attribute__ ((__visibility__ ("default")))/* your Entropy Gathering Daemon socket pathname *//* #undef EGD_SOCKET *//* Define if you want to enable IPv6 support */#define ENABLE_IPV6 1/* Define to the type of arg 2 for gethostname. */#define GETHOSTNAME_TYPE_ARG2 size_t/* Define to the type qualifier of arg 1 for getnameinfo. */#define GETNAMEINFO_QUAL_ARG1 const/* Define to the type of arg 1 for getnameinfo. */#define GETNAMEINFO_TYPE_ARG1 struct sockaddr */* Define to the type of arg 2 for getnameinfo. */#define GETNAMEINFO_TYPE_ARG2 socklen_t/* Define to the type of args 4 and 6 for getnameinfo. */#define GETNAMEINFO_TYPE_ARG46 socklen_t/* Define to the type of arg 7 for getnameinfo. */#define GETNAMEINFO_TYPE_ARG7 int/* Specifies the number of arguments to getservbyport_r *//* #undef GETSERVBYPORT_R_ARGS *//* Specifies the size of the buffer to pass to getservbyport_r *//* #undef GETSERVBYPORT_R_BUFSIZE *//* Define to 1 if you have the alarm function. */#define HAVE_ALARM 1/* Define to 1 if you have the <alloca.h> header file. */#define HAVE_ALLOCA_H 1/* Define to 1 if you have the <arpa/inet.h> header file. */#define HAVE_ARPA_INET_H 1/* Define to 1 if you have the <arpa/tftp.h> header file. */#define HAVE_ARPA_TFTP_H 1/* Define to 1 if you have the <assert.h> header file. */#define HAVE_ASSERT_H 1/* Define to 1 if you have the basename function. */#define HAVE_BASENAME 1/* Define to 1 if bool is an available type. */#define HAVE_BOOL_T 1/* Define to 1 if using BoringSSL. *//* #undef HAVE_BORINGSSL *//* Define to 1 if you have the clock_gettime function and monotonic timer. *//* #undef HAVE_CLOCK_GETTIME_MONOTONIC *//* Define to 1 if you have the closesocket function. *//* #undef HAVE_CLOSESOCKET *//* Define to 1 if you have the CloseSocket camel case function. *//* #undef HAVE_CLOSESOCKET_CAMEL *//* Define to 1 if you have the connect function. */#define HAVE_CONNECT 1/* Define to 1 if you have the `CRYPTO_cleanup_all_ex_data' function. *//* #undef HAVE_CRYPTO_CLEANUP_ALL_EX_DATA *//* Define to 1 if you have the <crypto.h> header file. *//* #undef HAVE_CRYPTO_H *//* Define to 1 if you have the <cyassl/error-ssl.h> header file. *//* #undef HAVE_CYASSL_ERROR_SSL_H *//* Define to 1 if you have the <cyassl/options.h> header file. *//* #undef HAVE_CYASSL_OPTIONS_H *//* Define to 1 if you have the `DES_set_odd_parity' function. *//* #undef HAVE_DES_SET_ODD_PARITY *//* Define to 1 if you have the <dlfcn.h> header file. */#define HAVE_DLFCN_H 1/* Define to 1 if you have the `ENGINE_cleanup' function. *//* #undef HAVE_ENGINE_CLEANUP *//* Define to 1 if you have the `ENGINE_load_builtin_engines' function. *//* #undef HAVE_ENGINE_LOAD_BUILTIN_ENGINES *//* Define to 1 if you have the <errno.h> header file. */#define HAVE_ERRNO_H 1/* Define to 1 if you have the <err.h> header file. */#define HAVE_ERR_H 1/* Define to 1 if you have the fcntl function. */#define HAVE_FCNTL 1/* Define to 1 if you have the <fcntl.h> header file. */#define HAVE_FCNTL_H 1/* Define to 1 if you have a working fcntl O_NONBLOCK function. */#define HAVE_FCNTL_O_NONBLOCK 1/* Define to 1 if you have the fdopen function. */#define HAVE_FDOPEN 1/* Define to 1 if you have the `fork' function. */#define HAVE_FORK 1/* Define to 1 if you have the freeaddrinfo function. */#define HAVE_FREEADDRINFO 1/* Define to 1 if you have the freeifaddrs function. */#define HAVE_FREEIFADDRS 1/* Define to 1 if you have the fsetxattr function. */#define HAVE_FSETXATTR 1/* fsetxattr() takes 5 args *//* #undef HAVE_FSETXATTR_5 *//* fsetxattr() takes 6 args *///#define HAVE_FSETXATTR_6 1/* Define to 1 if you have the ftruncate function. */#define HAVE_FTRUNCATE 1/* Define to 1 if you have the gai_strerror function. */#define HAVE_GAI_STRERROR 1/* Define to 1 if you have a working getaddrinfo function. */#define HAVE_GETADDRINFO 1/* Define to 1 if the getaddrinfo function is threadsafe. */#define HAVE_GETADDRINFO_THREADSAFE 1/* Define to 1 if you have the `geteuid' function. */#define HAVE_GETEUID 1/* Define to 1 if you have the gethostbyaddr function. */#define HAVE_GETHOSTBYADDR 1/* Define to 1 if you have the gethostbyaddr_r function. *//* #undef HAVE_GETHOSTBYADDR_R *//* gethostbyaddr_r() takes 5 args *//* #undef HAVE_GETHOSTBYADDR_R_5 *//* gethostbyaddr_r() takes 7 args *//* #undef HAVE_GETHOSTBYADDR_R_7 *//* gethostbyaddr_r() takes 8 args *//* #undef HAVE_GETHOSTBYADDR_R_8 *//* Define to 1 if you have the gethostbyname function. */#define HAVE_GETHOSTBYNAME 1/* Define to 1 if you have the gethostbyname_r function. *//* #undef HAVE_GETHOSTBYNAME_R *//* gethostbyname_r() takes 3 args *//* #undef HAVE_GETHOSTBYNAME_R_3 *//* gethostbyname_r() takes 5 args *//* #undef HAVE_GETHOSTBYNAME_R_5 *//* gethostbyname_r() takes 6 args *//* #undef HAVE_GETHOSTBYNAME_R_6 *//* Define to 1 if you have the gethostname function. */#define HAVE_GETHOSTNAME 1/* Define to 1 if you have a working getifaddrs function. *///#define HAVE_GETIFADDRS 1/* Define to 1 if you have the getnameinfo function. */#define HAVE_GETNAMEINFO 1/* Define to 1 if you have the `getpass_r' function. *//* #undef HAVE_GETPASS_R *//* Define to 1 if you have the `getppid' function. */#define HAVE_GETPPID 1/* Define to 1 if you have the `getprotobyname' function. */#define HAVE_GETPROTOBYNAME 1/* Define to 1 if you have the `getpwuid' function. */#define HAVE_GETPWUID 1/* Define to 1 if you have the `getpwuid_r' function. */#define HAVE_GETPWUID_R 1/* Define to 1 if you have the `getrlimit' function. */#define HAVE_GETRLIMIT 1/* Define to 1 if you have the getservbyport_r function. *//* #undef HAVE_GETSERVBYPORT_R *//* Define to 1 if you have the `gettimeofday' function. */#define HAVE_GETTIMEOFDAY 1/* Define to 1 if you have a working glibc-style strerror_r function. *//* #undef HAVE_GLIBC_STRERROR_R *//* Define to 1 if you have a working gmtime_r function. */#define HAVE_GMTIME_R 1/* Define to 1 if you have the `gnutls_certificate_set_x509_key_file2'   function. *//* #undef HAVE_GNUTLS_CERTIFICATE_SET_X509_KEY_FILE2 *//* if you have the function gnutls_srp_verifier *//* #undef HAVE_GNUTLS_SRP *//* if you have GSS-API libraries *//* #undef HAVE_GSSAPI *//* Define to 1 if you have the <gssapi/gssapi_generic.h> header file. *//* #undef HAVE_GSSAPI_GSSAPI_GENERIC_H *//* Define to 1 if you have the <gssapi/gssapi.h> header file. *//* #undef HAVE_GSSAPI_GSSAPI_H *//* Define to 1 if you have the <gssapi/gssapi_krb5.h> header file. *//* #undef HAVE_GSSAPI_GSSAPI_KRB5_H *//* if you have GNU GSS *//* #undef HAVE_GSSGNU *//* if you have Heimdal *//* #undef HAVE_GSSHEIMDAL *//* if you have MIT Kerberos *//* #undef HAVE_GSSMIT *//* Define to 1 if you have the `idna_strerror' function. *//* #undef HAVE_IDNA_STRERROR *//* Define to 1 if you have the `idn_free' function. *//* #undef HAVE_IDN_FREE *//* Define to 1 if you have the <idn-free.h> header file. *//* #undef HAVE_IDN_FREE_H *//* Define to 1 if you have the <ifaddrs.h> header file. *///#define HAVE_IFADDRS_H 1/* Define to 1 if you have the `if_nametoindex' function. */#define HAVE_IF_NAMETOINDEX 1/* Define to 1 if you have the `inet_addr' function. */#define HAVE_INET_ADDR 1/* Define to 1 if you have the inet_ntoa_r function. *//* #undef HAVE_INET_NTOA_R *//* inet_ntoa_r() takes 2 args *//* #undef HAVE_INET_NTOA_R_2 *//* inet_ntoa_r() takes 3 args *//* #undef HAVE_INET_NTOA_R_3 *//* Define to 1 if you have a IPv6 capable working inet_ntop function. */#define HAVE_INET_NTOP 1/* Define to 1 if you have a IPv6 capable working inet_pton function. */#define HAVE_INET_PTON 1/* Define to 1 if you have the <inttypes.h> header file. */#define HAVE_INTTYPES_H 1/* Define to 1 if you have the ioctl function. */#define HAVE_IOCTL 1/* Define to 1 if you have the ioctlsocket function. *//* #undef HAVE_IOCTLSOCKET *//* Define to 1 if you have the IoctlSocket camel case function. *//* #undef HAVE_IOCTLSOCKET_CAMEL *//* Define to 1 if you have a working IoctlSocket camel case FIONBIO function.   *//* #undef HAVE_IOCTLSOCKET_CAMEL_FIONBIO *//* Define to 1 if you have a working ioctlsocket FIONBIO function. *//* #undef HAVE_IOCTLSOCKET_FIONBIO *//* Define to 1 if you have a working ioctl FIONBIO function. */#define HAVE_IOCTL_FIONBIO 1/* Define to 1 if you have a working ioctl SIOCGIFADDR function. */#define HAVE_IOCTL_SIOCGIFADDR 1/* Define to 1 if you have the <io.h> header file. *//* #undef HAVE_IO_H *//* Define to 1 if you have the lber.h header file. *///#define HAVE_LBER_H 1/* Define to 1 if you have the ldapssl.h header file. *//* #undef HAVE_LDAPSSL_H *//* Define to 1 if you have the ldap.h header file. */#define HAVE_LDAP_H 1/* Define to 1 if you have the `ldap_init_fd' function. *//* #undef HAVE_LDAP_INIT_FD *//* Use LDAPS implementation */#define HAVE_LDAP_SSL 1/* Define to 1 if you have the ldap_ssl.h header file. *//* #undef HAVE_LDAP_SSL_H *//* Define to 1 if you have the `ldap_url_parse' function. */#define HAVE_LDAP_URL_PARSE 1/* Define to 1 if you have the <libgen.h> header file. */#define HAVE_LIBGEN_H 1/* Define to 1 if you have the `idn' library (-lidn). *//* #undef HAVE_LIBIDN *//* Define to 1 if you have the `resolve' library (-lresolve). *//* #undef HAVE_LIBRESOLVE *//* Define to 1 if using libressl. *//* #undef HAVE_LIBRESSL *//* Define to 1 if you have the <librtmp/rtmp.h> header file. *//* #undef HAVE_LIBRTMP_RTMP_H *//* Define to 1 if you have the `ssh2' library (-lssh2). *//* #undef HAVE_LIBSSH2 *//* Define to 1 if you have the <libssh2.h> header file. *//* #undef HAVE_LIBSSH2_H *//* Define to 1 if you have the `ssl' library (-lssl). */#define HAVE_LIBSSL 1/* if zlib is available *///#define HAVE_LIBZ 1/* Define to 1 if you have the <limits.h> header file. */#define HAVE_LIMITS_H 1/* if your compiler supports LL */#define HAVE_LL 1/* Define to 1 if you have the <locale.h> header file. */#define HAVE_LOCALE_H 1/* Define to 1 if you have a working localtime_r function. */#define HAVE_LOCALTIME_R 1/* Define to 1 if the compiler supports the 'long long' data type. */#define HAVE_LONGLONG 1/* Define to 1 if you have the malloc.h header file. *//* #undef HAVE_MALLOC_H *//* Define to 1 if you have the memory.h header file. */#define HAVE_MEMORY_H 1/* Define to 1 if you have the memrchr function or macro. *//* #undef HAVE_MEMRCHR *//* Define to 1 if you have the MSG_NOSIGNAL flag. *//* #undef HAVE_MSG_NOSIGNAL *//* Define to 1 if you have the <netdb.h> header file. */#define HAVE_NETDB_H 1/* Define to 1 if you have the <netinet/in.h> header file. */#define HAVE_NETINET_IN_H 1/* Define to 1 if you have the <netinet/tcp.h> header file. */#define HAVE_NETINET_TCP_H 1/* Define to 1 if you have the <net/if.h> header file. */#define HAVE_NET_IF_H 1/* Define to 1 if you have the <nghttp2/nghttp2.h> header file. *//* #undef HAVE_NGHTTP2_NGHTTP2_H *//* Define to 1 if NI_WITHSCOPEID exists and works. *//* #undef HAVE_NI_WITHSCOPEID *//* if you have an old MIT Kerberos version, lacking GSS_C_NT_HOSTBASED_SERVICE   *//* #undef HAVE_OLD_GSSMIT *//* Define to 1 if you have the <openssl/crypto.h> header file. *//* #undef HAVE_OPENSSL_CRYPTO_H *//* Define to 1 if you have the <openssl/engine.h> header file. *//* #undef HAVE_OPENSSL_ENGINE_H *//* Define to 1 if you have the <openssl/err.h> header file. *//* #undef HAVE_OPENSSL_ERR_H *//* Define to 1 if you have the <openssl/pem.h> header file. *//* #undef HAVE_OPENSSL_PEM_H *//* Define to 1 if you have the <openssl/pkcs12.h> header file. *//* #undef HAVE_OPENSSL_PKCS12_H *//* Define to 1 if you have the <openssl/rsa.h> header file. *//* #undef HAVE_OPENSSL_RSA_H *//* if you have the function SRP_Calc_client_key *//* #undef HAVE_OPENSSL_SRP *//* Define to 1 if you have the <openssl/ssl.h> header file. *//* #undef HAVE_OPENSSL_SSL_H *//* Define to 1 if you have the <openssl/x509.h> header file. *//* #undef HAVE_OPENSSL_X509_H *//* Define to 1 if you have the <pem.h> header file. *//* #undef HAVE_PEM_H *//* Define to 1 if you have the `perror' function. */#define HAVE_PERROR 1/* Define to 1 if you have the `pipe' function. */#define HAVE_PIPE 1/* Define to 1 if you have a working poll function. */#define HAVE_POLL 1/* If you have a fine poll */#define HAVE_POLL_FINE 1/* Define to 1 if you have the <poll.h> header file. */#define HAVE_POLL_H 1/* Define to 1 if you have a working POSIX-style strerror_r function. */#define HAVE_POSIX_STRERROR_R 1/* if you have <pthread.h> *//* #undef HAVE_PTHREAD_H *//* Define to 1 if you have the <pwd.h> header file. */#define HAVE_PWD_H 1/* Define to 1 if you have the `RAND_egd' function. *//* #undef HAVE_RAND_EGD *//* Define to 1 if you have the `RAND_screen' function. *//* #undef HAVE_RAND_SCREEN *//* Define to 1 if you have the `RAND_status' function. *//* #undef HAVE_RAND_STATUS *//* Define to 1 if you have the recv function. */#define HAVE_RECV 1/* Define to 1 if you have the <rsa.h> header file. *//* #undef HAVE_RSA_H *//* Define to 1 if you have the select function. */#define HAVE_SELECT 1/* Define to 1 if you have the send function. */#define HAVE_SEND 1/* Define to 1 if you have the <setjmp.h> header file. */#define HAVE_SETJMP_H 1/* Define to 1 if you have the `setlocale' function. */#define HAVE_SETLOCALE 1/* Define to 1 if you have the `setmode' function. */#define HAVE_SETMODE 1/* Define to 1 if you have the `setrlimit' function. */#define HAVE_SETRLIMIT 1/* Define to 1 if you have the setsockopt function. */#define HAVE_SETSOCKOPT 1/* Define to 1 if you have a working setsockopt SO_NONBLOCK function. *//* #undef HAVE_SETSOCKOPT_SO_NONBLOCK *//* Define to 1 if you have the <sgtty.h> header file. */#define HAVE_SGTTY_H 1/* Define to 1 if you have the sigaction function. */#define HAVE_SIGACTION 1/* Define to 1 if you have the siginterrupt function. */#define HAVE_SIGINTERRUPT 1/* Define to 1 if you have the signal function. */#define HAVE_SIGNAL 1/* Define to 1 if you have the <signal.h> header file. */#define HAVE_SIGNAL_H 1/* Define to 1 if you have the sigsetjmp function or macro. */#define HAVE_SIGSETJMP 1/* Define to 1 if sig_atomic_t is an available typedef. */#define HAVE_SIG_ATOMIC_T 1/* Define to 1 if sig_atomic_t is already defined as volatile. *//* #undef HAVE_SIG_ATOMIC_T_VOLATILE *//* Define to 1 if struct sockaddr_in6 has the sin6_scope_id member *///#define HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID 1/* Define to 1 if you have the socket function. */#define HAVE_SOCKET 1/* Define to 1 if you have the socketpair function. */#define HAVE_SOCKETPAIR 1/* Define to 1 if you have the <socket.h> header file. *//* #undef HAVE_SOCKET_H *//* Define to 1 if you have the `SSLv2_client_method' function. *//* #undef HAVE_SSLV2_CLIENT_METHOD *//* Define to 1 if you have the `SSL_get_shutdown' function. *//* #undef HAVE_SSL_GET_SHUTDOWN *//* Define to 1 if you have the <ssl.h> header file. *//* #undef HAVE_SSL_H *//* Define to 1 if you have the <stdbool.h> header file. */#define HAVE_STDBOOL_H 1/* Define to 1 if you have the <stdint.h> header file. */#define HAVE_STDINT_H 1/* Define to 1 if you have the <stdio.h> header file. */#define HAVE_STDIO_H 1/* Define to 1 if you have the <stdlib.h> header file. */#define HAVE_STDLIB_H 1/* Define to 1 if you have the strcasecmp function. */#define HAVE_STRCASECMP 1/* Define to 1 if you have the strcmpi function. *//* #undef HAVE_STRCMPI *//* Define to 1 if you have the strdup function. */#define HAVE_STRDUP 1/* Define to 1 if you have the strerror_r function. */#define HAVE_STRERROR_R 1/* Define to 1 if you have the stricmp function. *//* #undef HAVE_STRICMP *//* Define to 1 if you have the <strings.h> header file. */#define HAVE_STRINGS_H 1/* Define to 1 if you have the <string.h> header file. */#define HAVE_STRING_H 1/* Define to 1 if you have the strncasecmp function. */#define HAVE_STRNCASECMP 1/* Define to 1 if you have the strncmpi function. *//* #undef HAVE_STRNCMPI *//* Define to 1 if you have the strnicmp function. *//* #undef HAVE_STRNICMP *//* Define to 1 if you have the <stropts.h> header file. *//* #undef HAVE_STROPTS_H *//* Define to 1 if you have the strstr function. */#define HAVE_STRSTR 1/* Define to 1 if you have the strtok_r function. */#define HAVE_STRTOK_R 1/* Define to 1 if you have the strtoll function. */#define HAVE_STRTOLL 1/* if struct sockaddr_storage is defined */#define HAVE_STRUCT_SOCKADDR_STORAGE 1/* Define to 1 if you have the timeval struct. */#define HAVE_STRUCT_TIMEVAL 1/* Define to 1 if you have the <sys/filio.h> header file. */#define HAVE_SYS_FILIO_H 1/* Define to 1 if you have the <sys/ioctl.h> header file. */#define HAVE_SYS_IOCTL_H 1/* Define to 1 if you have the <sys/param.h> header file. */#define HAVE_SYS_PARAM_H 1/* Define to 1 if you have the <sys/poll.h> header file. */#define HAVE_SYS_POLL_H 1/* Define to 1 if you have the <sys/resource.h> header file. */#define HAVE_SYS_RESOURCE_H 1/* Define to 1 if you have the <sys/select.h> header file. */#define HAVE_SYS_SELECT_H 1/* Define to 1 if you have the <sys/socket.h> header file. */#define HAVE_SYS_SOCKET_H 1/* Define to 1 if you have the <sys/sockio.h> header file. *///#define HAVE_SYS_SOCKIO_H 1/* Define to 1 if you have the <sys/stat.h> header file. */#define HAVE_SYS_STAT_H 1/* Define to 1 if you have the <sys/time.h> header file. */#define HAVE_SYS_TIME_H 1/* Define to 1 if you have the <sys/types.h> header file. */#define HAVE_SYS_TYPES_H 1/* Define to 1 if you have the <sys/uio.h> header file. */#define HAVE_SYS_UIO_H 1/* Define to 1 if you have the <sys/un.h> header file. */#define HAVE_SYS_UN_H 1/* Define to 1 if you have the <sys/utime.h> header file. *//* #undef HAVE_SYS_UTIME_H *//* Define to 1 if you have the <sys/wait.h> header file. */#define HAVE_SYS_WAIT_H 1/* Define to 1 if you have the <sys/xattr.h> header file. */#define HAVE_SYS_XATTR_H 1/* Define to 1 if you have the <termios.h> header file. */#define HAVE_TERMIOS_H 1/* Define to 1 if you have the <termio.h> header file. *//* #undef HAVE_TERMIO_H *//* Define to 1 if you have the <time.h> header file. */#define HAVE_TIME_H 1/* Define to 1 if you have the <tld.h> header file. *//* #undef HAVE_TLD_H *//* Define to 1 if you have the `tld_strerror' function. *//* #undef HAVE_TLD_STRERROR *//* Define to 1 if you have the `uname' function. */#define HAVE_UNAME 1/* Define to 1 if you have the <unistd.h> header file. */#define HAVE_UNISTD_H 1/* Define to 1 if you have the `utime' function. */#define HAVE_UTIME 1/* Define to 1 if you have the <utime.h> header file. */#define HAVE_UTIME_H 1/* Define to 1 if compiler supports C99 variadic macro style. */#define HAVE_VARIADIC_MACROS_C99 1/* Define to 1 if compiler supports old gcc variadic macro style. */#define HAVE_VARIADIC_MACROS_GCC 1/* Define to 1 if you have the winber.h header file. *//* #undef HAVE_WINBER_H *//* Define to 1 if you have the windows.h header file. *//* #undef HAVE_WINDOWS_H *//* Define to 1 if you have the winldap.h header file. *//* #undef HAVE_WINLDAP_H *//* Define to 1 if you have the winsock2.h header file. *//* #undef HAVE_WINSOCK2_H *//* Define to 1 if you have the winsock.h header file. *//* #undef HAVE_WINSOCK_H *//* Define this symbol if your OS supports changing the contents of argv */#define HAVE_WRITABLE_ARGV 1/* Define to 1 if you have the writev function. */#define HAVE_WRITEV 1/* Define to 1 if you have the ws2tcpip.h header file. *//* #undef HAVE_WS2TCPIP_H *//* Define to 1 if you have the <x509.h> header file. *//* #undef HAVE_X509_H *//* if you have the zlib.h header file */#define HAVE_ZLIB_H 1/* Define to the sub-directory in which libtool stores uninstalled libraries.   */#define LT_OBJDIR ".libs/"/* Define to 1 if you need the lber.h header file even with ldap.h *//* #undef NEED_LBER_H *//* Define to 1 if you need the malloc.h header file even with stdlib.h *//* #undef NEED_MALLOC_H *//* Define to 1 if you need the memory.h header file even with stdlib.h *//* #undef NEED_MEMORY_H *//* Define to 1 if _REENTRANT preprocessor symbol must be defined. *//* #undef NEED_REENTRANT *//* Define to 1 if _THREAD_SAFE preprocessor symbol must be defined. *//* #undef NEED_THREAD_SAFE *//* Define to enable NTLM delegation to winbind's ntlm_auth helper. *//* #undef NTLM_WB_ENABLED *//* Define absolute filename for winbind's ntlm_auth helper. *//* #undef NTLM_WB_FILE *//* cpu-machine-OS */#define OS "x86_64-apple-darwin14.5.0"/* Name of package */#define PACKAGE "curl"/* Define to the address where bug reports for this package should be sent. */#define PACKAGE_BUGREPORT "a suitable curl mailing list: http://curl.haxx.se/mail/"/* Define to the full name of this package. */#define PACKAGE_NAME "curl"/* Define to the full name and version of this package. */#define PACKAGE_STRING "curl -"/* Define to the one symbol short name of this package. */#define PACKAGE_TARNAME "curl"/* Define to the home page for this package. */#define PACKAGE_URL ""/* Define to the version of this package. */#define PACKAGE_VERSION "-"/* a suitable file to read random data from *//* #undef RANDOM_FILE *//* Define to the type of arg 1 for recv. */#define RECV_TYPE_ARG1 int/* Define to the type of arg 2 for recv. */#define RECV_TYPE_ARG2 void */* Define to the type of arg 3 for recv. */#define RECV_TYPE_ARG3 size_t/* Define to the type of arg 4 for recv. */#define RECV_TYPE_ARG4 int/* Define to the function return type for recv. */#define RECV_TYPE_RETV ssize_t/* Define as the return type of signal handlers (`int' or `void'). */#define RETSIGTYPE void/* Define to the type qualifier of arg 5 for select. */#define SELECT_QUAL_ARG5 /* Define to the type of arg 1 for select. */#define SELECT_TYPE_ARG1 int/* Define to the type of args 2, 3 and 4 for select. */#define SELECT_TYPE_ARG234 fd_set */* Define to the type of arg 5 for select. */#define SELECT_TYPE_ARG5 struct timeval */* Define to the function return type for select. */#define SELECT_TYPE_RETV int/* Define to the type qualifier of arg 2 for send. */#define SEND_QUAL_ARG2 const/* Define to the type of arg 1 for send. */#define SEND_TYPE_ARG1 int/* Define to the type of arg 2 for send. */#define SEND_TYPE_ARG2 void */* Define to the type of arg 3 for send. */#define SEND_TYPE_ARG3 size_t/* Define to the type of arg 4 for send. */#define SEND_TYPE_ARG4 int/* Define to the function return type for send. */#define SEND_TYPE_RETV ssize_t/* The size of `int', as computed by sizeof. */#define SIZEOF_INT 4/* The size of `long', as computed by sizeof. */#define SIZEOF_LONG 8/* The size of `long long', as computed by sizeof. *//* #undef SIZEOF_LONG_LONG *//* The size of `off_t', as computed by sizeof. */#define SIZEOF_OFF_T 8/* The size of `short', as computed by sizeof. */#define SIZEOF_SHORT 2/* The size of `size_t', as computed by sizeof. */#define SIZEOF_SIZE_T 8/* The size of `time_t', as computed by sizeof. */#define SIZEOF_TIME_T 8/* The size of `void*', as computed by sizeof. */#define SIZEOF_VOIDP 8/* Define to 1 if you have the ANSI C header files. */#define STDC_HEADERS 1/* Define to the type of arg 3 for strerror_r. */#define STRERROR_R_TYPE_ARG3 size_t/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */#define TIME_WITH_SYS_TIME 1/* Define to enable c-ares support *//* #undef USE_ARES *//* if axTLS is enabled *//* #undef USE_AXTLS *//* if CyaSSL is enabled *//* #undef USE_CYASSL *//* to enable iOS/Mac OS X native SSL/TLS support *//* #undef USE_DARWINSSL *//* if GnuTLS is enabled *//* #undef USE_GNUTLS *//* if GnuTLS uses nettle as crypto backend *//* #undef USE_GNUTLS_NETTLE *//* if librtmp is in use *//* #undef USE_LIBRTMP *//* if libSSH2 is in use *//* #undef USE_LIBSSH2 *//* If you want to build curl with the built-in manual */#define USE_MANUAL 1/* Define to enable metalink support *//* #undef USE_METALINK *//* if nghttp2 is in use *//* #undef USE_NGHTTP2 *//* if NSS is enabled *//* #undef USE_NSS *//* Use OpenLDAP-specific code *//* #undef USE_OPENLDAP *//* if OpenSSL is in use *//* #undef USE_OPENSSL *//* if PolarSSL is enabled *//* #undef USE_POLARSSL *//* to enable Windows native SSL/TLS support *//* #undef USE_SCHANNEL *//* if you want POSIX threaded DNS lookup *//* #undef USE_THREADS_POSIX *//* Use TLS-SRP authentication *//* #undef USE_TLS_SRP *//* Use Unix domain sockets */#define USE_UNIX_SOCKETS 1/* Define to 1 if you have the `normaliz' (WinIDN) library (-lnormaliz). *//* #undef USE_WIN32_IDN *//* Define to 1 if you are building a Windows target with large file support.   *//* #undef USE_WIN32_LARGE_FILES *//* Use Windows LDAP implementation */#undef USE_WIN32_LDAP/* Define to 1 if you are building a Windows target without large file   support. *//* #undef USE_WIN32_SMALL_FILES *//* to enable SSPI support *//* #undef USE_WINDOWS_SSPI *//* Version number of package */#define VERSION "-"/* Define to 1 to provide own prototypes. *//* #undef WANT_IDN_PROTOTYPES *//* Define to avoid automatic inclusion of winsock.h *//* #undef WIN32_LEAN_AND_MEAN *//* Define to 1 if OS is AIX. */#ifndef _ALL_SOURCE/* #  undef _ALL_SOURCE */#endif/* Enable large inode numbers on Mac OS X 10.5.  */#ifndef _DARWIN_USE_64_BIT_INODE# define _DARWIN_USE_64_BIT_INODE 1#endif/* Number of bits in a file offset, on hosts where this is settable. *//* #undef _FILE_OFFSET_BITS *//* Define for large files, on AIX-style hosts. *//* #undef _LARGE_FILES *//* Define to empty if `const' does not conform to ANSI C. *//* #undef const *//* Type to use in place of in_addr_t when system does not provide it. *//* #undef in_addr_t *//* Define to `__inline__' or `__inline' if that's what the C compiler   calls it, or to nothing if 'inline' is not supported under any name.  */#ifndef __cplusplus/* #undef inline */#endif/* Define to `unsigned int' if <sys/types.h> does not define. *//* #undef size_t *//* the signed version of size_t *//* #undef ssize_t */