BZOJ4390Max Flow
来源:互联网 发布:多个list转json 编辑:程序博客网 时间:2024/05/17 04:07
4390: [Usaco2015 dec]Max Flow
Time Limit: 10 Sec Memory Limit: 128 MB
Submit: 88 Solved: 55
Description
Farmer John has installed a new system of N−1 pipes to transport milk between the N stalls in his barn (2≤N≤50,000), conveniently numbered 1…N. Each pipe connects a pair of stalls, and all stalls are connected to each-other via paths of pipes.
FJ is pumping milk between KK pairs of stalls (1≤K≤100,000). For the iith such pair, you are told two stalls sisi and titi, endpoints of a path along which milk is being pumped at a unit rate. FJ is concerned that some stalls might end up overwhelmed with all the milk being pumped through them, since a stall can serve as a waypoint along many of the KK paths along which milk is being pumped. Please help him determine the maximum amount of milk being pumped through any stall. If milk is being pumped along a path from sisi to titi, then it counts as being pumped through the endpoint stalls sisi and titi, as well as through every stall along the path between them.
给定一棵有N个点的树,所有节点的权值都为0。
有K次操作,每次指定两个点s,t,将s到t路径上所有点的权值都加一。
请输出K次操作完毕后权值最大的那个点的权值。
Input
The first line of the input contains NN and KK.
The next N−1 lines each contain two integers x and y (x≠y,x≠y) describing a pipe between stalls x and y.
The next K lines each contain two integers ss and t describing the endpoint stalls of a path through which milk is being pumped.
Output
An integer specifying the maximum amount of milk pumped through any stall in the barn.
Sample Input
5 10
3 4
1 5
4 2
5 4
5 4
5 4
3 5
4 3
4 3
1 3
3 5
5 4
1 5
3 4
Sample Output
9
Source
Platinum鸣谢Claris提供译文
本来是道链剖傻逼题。。
结果我TMpaint写错了。。
导致5A。。
我是渣渣。。
附上本蒟蒻的代码:
#include<cstdio>#include<iostream>#include<cstring>#include<climits>using namespace std;#define MAXN 50001int n,m,cnt,sz,h[MAXN],father[MAXN][17],deep[MAXN],size[MAXN],pos[MAXN],belong[MAXN],delta[MAXN<<2];bool vis[MAXN];struct data{ int to,next;}edge[MAXN<<1];struct kx{ int value;}node[MAXN<<2];int read(){ int w=0,c=1; char ch=getchar(); while (ch<'0' || ch>'9') { if (ch=='-') c=-1; ch=getchar(); } while (ch>='0' && ch<='9') w=w*10+ch-'0',ch=getchar(); return w*c;}void add(int u,int v){ cnt++,edge[cnt].next=h[u],h[u]=cnt,edge[cnt].to=v; cnt++,edge[cnt].next=h[v],h[v]=cnt,edge[cnt].to=u;}void dfs1(int x){ int i; size[x]=1,vis[x]=true; for (i=1;i<=16;i++) { if (deep[x]<(1<<i)) break; father[x][i]=father[father[x][i-1]][i-1]; } for (i=h[x];i;i=edge[i].next) { if (vis[edge[i].to]) continue; deep[edge[i].to]=deep[x]+1,father[edge[i].to][0]=x; dfs1(edge[i].to),size[x]+=size[edge[i].to]; }}void dfs2(int x,int chain){ int k=0,i; sz++,pos[x]=sz,belong[x]=chain; for (i=h[x];i;i=edge[i].next) if (deep[edge[i].to]>deep[x] && size[edge[i].to]>size[k]) k=edge[i].to; if (!k) return; dfs2(k,chain); for (i=h[x];i;i=edge[i].next) if (deep[edge[i].to]>deep[x] && k!=edge[i].to) dfs2(edge[i].to,edge[i].to);}void update(int s){ node[s].value=max(node[s*2].value,node[s*2+1].value);}void build(int s,int l,int r){ int mid=(l+r)/2; if (l==r) return; build(s*2,l,mid); build(s*2+1,mid+1,r); update(s);}void paint(int s,int z,int l,int r){ node[s].value+=z; delta[s]+=z;}void pushdown(int s,int l,int r){ int mid=(l+r)/2; paint(s*2,delta[s],l,mid); paint(s*2+1,delta[s],mid+1,r); delta[s]=0;}void insert(int s,int l,int r,int x,int y,int z){ int mid=(l+r)/2; if (x<=l && y>=r) { paint(s,z,l,r); return; } if (delta[s]) pushdown(s,l,r); if (x<=mid) insert(s*2,l,mid,x,y,z); if (y>mid) insert(s*2+1,mid+1,r,x,y,z); update(s);}void solveinsert(int x,int y,int z){ for (;belong[x]!=belong[y];x=father[belong[x]][0]) { if (deep[belong[x]]<deep[belong[y]]) swap(x,y); insert(1,1,n,pos[belong[x]],pos[x],z); } if (deep[x]<deep[y]) swap(x,y); insert(1,1,n,pos[y],pos[x],z);}int querymax(int s,int l,int r,int x,int y){ int mid=(l+r)/2,ans; if (x<=l && y>=r) return node[s].value; if (delta[s]) pushdown(s,l,r); if (x<=mid) ans=querymax(s*2,l,mid,x,y); else ans=-INT_MAX; if (y>mid) ans=max(ans,querymax(s*2+1,mid+1,r,x,y)); update(s); return ans;}int main(){ int i,x,y; n=read(),m=read(); for (i=1;i<n;i++) x=read(),y=read(),add(x,y); dfs1(1),dfs2(1,1),build(1,1,n); for (i=1;i<=m;i++) { x=read(),y=read(); solveinsert(x,y,1); } printf("%d\n",querymax(1,1,n,1,n)); return 0;}
- BZOJ4390Max Flow
- flow
- flow
- flow
- flow
- flow
- flow
- CreateProcess Flow
- IC flow
- Processing Flow
- development flow
- WORK FLOW
- ${flow.name}
- optical flow
- HTML flow
- L2tp flow
- flow digram
- RIL flow
- Problem B
- 解决在weblogic(可能与之无关)下jsp通过post传递中文内容表单乱码问题
- AppInterface,一套Android与H5的混合开发框架
- 机房重构之导出Excel表
- 自动化测试,javasript遍历JSON对象及XML对象
- BZOJ4390Max Flow
- codeforces 630 I Parking Lot (规律&&组合)
- 虚拟机的三种网络模式
- 第四周项目5.3-用递归方法求解
- kafka入门
- 寄生组合继承
- IT行业2016研究分析
- 第三周项目一-个人所得税计算器
- 复习