使用源码编译wxpython-基于python2.7
来源:互联网 发布:隐藏软件工具 编辑:程序博客网 时间:2024/05/23 20:40
1、前言
本文主要讲述在linux环境下进行编译wxpython,在windows下面安装wxpython很简单,只要下载,然后直接执行exe文件,下一步下一步即可安装,在linux下面,则具有很多步骤。
wxpython下载地址为:
http://wxpython.org/download.php
具体的源码下载路径在最下面的位置,名称为wxPython-src,点击即可下载。下载的文件名称为wxPython-src-3.0.2.0.tar.bz2.
2、解压
进行解压:
[root@FTP ~]# tar -jxvf wxPython-src-3.0.2.0.tar.bz2
3、安装依赖包
gtk2,gtk2-devel,python-devel,tk,tk-devel,gstreamer,gstreamer-devel,mesa-libGL-devel,
mesa-libGLU-devel,mesa-libGLU,mesa-libGL,libSM,libSM-devel,gstreamer-plugins-base-devel
最好是利用yum进行安装。。否则会崩溃的
4、编译
新建一个临时路径来保存编译的结果,如下所示:
[root@FTP wxPython-src-3.0.2.0]# mkdir bld[root@FTP wxPython-src-3.0.2.0]# cd bld[root@FTP bld]# ../configure --prefix=/usr/local/pythonwxpython --with-gtk --with-gnomeprint
--with-opengl --enable-debug --enable-geometry --enable-graphics_ctx --enable-sound --with-sdl
--enable-mediactrl --enable-display --disable-debugreport --enable-unicode --with-libjpeg=builtin
--with-libpng=builtin --with-libtiff=builtin --with-zlib=builtin
新建bld来保存编译的结果,主要是由于编译的时候,占用的空间有1G多,所以需要用一个新的目录进行编译,注意上面configure前面有两个点。
编译结果如下:
进行安装:
make && make install
消耗的时间和占用的空间如下:--编译需要8分钟的样子,估计服务器会快很多
[root@FTP local]# df -hFilesystem Size Used Avail Use% Mounted on/dev/mapper/vg_ftp-lv_root 9.9G 6.1G 3.3G 66% /tmpfs 387M 0 387M 0% /dev/shm/dev/sda1 485M 32M 428M 7% /boot[root@FTP local]# dateTue Apr 5 13:07:07 EDT 2016[root@FTP local]# dateTue Apr 5 13:14:56 EDT 2016[root@FTP local]# df -hFilesystem Size Used Avail Use% Mounted on/dev/mapper/vg_ftp-lv_root 9.9G 8.1G 1.3G 87% /tmpfs 387M 0 387M 0% /dev/shm/dev/sda1 485M 32M 428M 7% /boot
进行安装wxpython:--WX_CONFIG就是前面编译configure的路径
[root@FTP wxPython]# python setup.py build_ext --inplace --debug WX_CONFIG=/usr/local/pythonwxpython/bin/wx-config
安装之后,设置wxpython的环境变量:
export PYTHONPATH="/usr/local/wxPython"export LD_LIBRARY_PATH="/usr/local/pythonwxpython/lib
可以添加在用户加目录中,另外必须将wxpython添加到pythonpath中,如下:
[root@FTP wxPython-src-3.0.2.0]# cp -r wxPython /usr/local/wxPython/
拷贝主要是为了对应上面的PYTHONPATH
问题
1、重新编译
在进行重新编译的时候,必须先进行清除前面编译的文件,使用的命令如下:
make distclean
如果使用makeclean,是不可以的,报错信息如下:
configure: error: source directory already configured; run "make distclean" there firstconfigure: error: ../../../src/tiff/configure failed for src/tiff
如果使用上面的命令不能清除,那么还是重新解压进行编译吧
2、导入wx模块出错
导入wx模块的时候,出错,出错内容如下:
>>> import wxTraceback (most recent call last): File "<stdin>", line 1, in <module> File "wx/__init__.py", line 45, in <module> from wx._core import * File "wx/_core.py", line 4, in <module> import _core_ImportError: libwx_gtk2u_xrc-3.0.so.0: cannot open shared object file: No such file or directory
设置环境变量LD_LIBRARY_PATH:
[root@FTP wxPython]# cat ~/.bash_profile |grep LDexport LD_LIBRARY_PATH="/usr/local/pythonwxpython/lib
将环境变量写在用户文件中,从而每次都可以直接使用。
3、在别的路径无法导入wx模块
在别的路径导入wx模块的时候,报错如下:
[root@FTP ~]# pythonPython 2.7.11 (default, Apr 5 2016, 12:30:11)[GCC 4.4.6 20110731 (Red Hat 4.4.6-3)] on linux2Type "help", "copyright", "credits" or "license" for more information.>>> import wxTraceback (most recent call last): File "<stdin>", line 1, in <module>ImportError: No module named wx
主要是将wxpython加入到模块的搜索路径中,只要修改环境变量即可,如下:
[root@FTP wxPython-src-3.0.2.0]# cp -r wxPython /usr/local/wxPython[root@FTP wxPython-src-3.0.2.0]# cat ~/.bash_profile |grep PYTHONexport PYTHONPATH="/usr/local/wxPython"
4、报错gtk未找到
具体的报错内容如下:
*** Could not run GTK+ test program, checking why...*** The test program failed to compile or link. See the file config.log for the*** exact error that occured. This usually means GTK+ is incorrectly installed.configure: error:The development files for GTK+ were not found. For GTK+ 2, pleaseensure that pkg-config is in the path and that gtk+-2.0.pc isinstalled. For GTK+ 1.2 please check that gtk-config is in the path,and that the version is 1.2.3 or above. Also check that thelibraries returned by 'pkg-config gtk+-2.0 --libs' or 'gtk-config--libs' are in the LD_LIBRARY_PATH or equivalent.
主要查看是否安装了gtk2和gtk2-devel包,安装上这两个包即可
有人说需要安装pkgconfig包,本系统中已经安装了这个包,所以未进行测试。
5、报错gstream未找到
具体的报错内容如下:
configure: No package 'gstreamer-1.0' foundconfigure: error: no gstreamer-1.0 >= 1.0.0 (GStreamer) found
主要报错是因为缺少几个包,具体的包如下:
[root@FTP demo]# rpm -qa |grep ^gstreamer*gstreamer-plugins-base-0.10.29-1.el6.x86_64gstreamer-0.10.29-1.el6.x86_64gstreamer-devel-0.10.29-1.el6.x86_64gstreamer-plugins-base-devel-0.10.29-1.el6.x86_64gstreamer-tools-0.10.29-1.el6.x86_64
看缺少什么包,然后就安装什么依赖包。
6、报错opengl库未找到
具体的报错内容如下:
configure: error: OpenGL libraries not available
主要缺少的依赖库如下:
[root@FTP demo]# rpm -qa|egrep "mesa-libGL-devel|mesa-libGLU-devel"mesa-libGL-devel-7.11-3.el6.x86_64mesa-libGLU-devel-7.11-3.el6.x86_64
注意没有带devel的包也要相应的装上。
7、在进行安装wxpython的时候出现很多报错
在进行安装wxpython的时候,如果出现很多编译错误,直接加上参数BUILD_GLCANVAS=0,也可以直接忽略。
[root@FTP wxPython]# python setup.py build_ext --inplace --debug WX_CONFIG=/usr/local/pythonwxpython/bin/wx-config BUILD_GLCANVAS=0
8、其他的问题
如果出现其他的问题的话,基本都是依赖包的问题,依次进行安装上述的依赖包即可。
- 使用源码编译wxpython-基于python2.7
- wxPython源码编译和安装
- Windows10下python2.7安装wxpython
- 如何通过源码文件编译安装wxpython
- Python2.7 源码编译并集成第三方python模块
- wxpython 编译
- python2.7源码安装
- VS2015编译Python2.7.14源码(失败)
- 关于VS2008编译Python2.7
- Centos6编译安装python2.7
- wxPython使用
- wxpython使用
- python2.7使用ansible
- python2.7使用csv
- 使用Visual Studio 2010编译wxPython-2.8.12.1
- linux python2升级到python3(源码编译安装)
- Python简介与入门(基于Python2.7)
- Python基础(一)(基于Python2.7)
- 如何组织代码
- AWS的十年创新之路
- instrumentation
- Installing MySQL Server on CentOS
- Top K问题——基于堆排序
- 使用源码编译wxpython-基于python2.7
- mtt 初见识
- intent-filter
- iOS开发之详解连连支付集成
- MySQL(4)
- ORACLE 表分区
- 添加沉浸式状态栏
- Android 中的长度单位详解
- C# - Marshal.StructureToPtr方法简介