第11周项目5-虚基类(转载)
来源:互联网 发布:淘宝更换类目有影响吗 编辑:程序博客网 时间:2024/05/20 08:23
/*Copyright (c) 2016, 烟台大学计算机学院 02.*All rights reserved. 03.*文件名称:c11weeks.cpp 04.*作者:张天择 05.*完成日期:2016年 6月2日 06.*版本号:vc++6.0 07.*/
#include <iostream>#include<conio.h>#include <windows.h>using namespace std;enum VehicleStaus {rest, running}; //车辆状态:泊车、行进class Vehicle //车辆类{protected: int maxSpeed;//最大车速 int currentSpeed;//当前速度 int weight;//车重 VehicleStaus status; //rest-泊车状态;running-行进状态public: Vehicle(int maxS, int w); //构造函数,初始时,当前速度总为0且处在停车状态 void start(); //由rest状态到running, 初速为1 void stop(); //由running状态到rest, 当前速度小于5时,才允许停车 void speed_up(); //加速,调用1次,速度加1 void slow_down(); //减速,调用1次,速度减1,速度为0时,停车};//构造函数,初始时,当前速度总为0且处在停车状态Vehicle::Vehicle(int maxS, int w):maxSpeed(maxS), currentSpeed(0),weight(w), status(rest) {}//启动:由rest状态到running, 初速为1void Vehicle::start(){ if (status==rest) { status=running; currentSpeed=1; } else cout<<"车辆已经行驶!"<<endl;}//由running状态到rest, 当前速度小于5时,才允许停车void Vehicle::stop(){ if (status==running) if(currentSpeed<5) { status=rest; currentSpeed=0; } else cout<<"车速太快!先减速再停车……"<<endl; else cout<<"车辆未启动!"<<endl;}//加速,调用1次,速度加1void Vehicle::speed_up(){ if (status==running) if(currentSpeed<maxSpeed) ++currentSpeed; else cout<<"请不要超速行驶……"<<endl; else cout<<"车辆未启动!"<<endl;}//减速,调用1次,速度减1,速度为0时,停车void Vehicle::slow_down(){ if (status==running) { if(currentSpeed>0) --currentSpeed; } else cout<<"车辆未启动!"<<endl; if(currentSpeed==0) status=rest;}class Bicycle :virtual public Vehicle //()自行车类{protected: double height; //车高public: Bicycle(int maxS=10, int w=50, int h=0.7); //定义构造函数};Bicycle::Bicycle(int maxS, int w, int h):Vehicle(maxS, w),height(h) {}class Motorcar : virtual public Vehicle//()机动车类{protected: int seatNum; //座位数 int passengerNum; //乘客人数public: Motorcar(int maxS=150, int w=1500, int s=5, int p=1); //定义构造函数 void addPassenger(int p=1); //搭载乘客,超员要拒载,有人下车时,p为负数。当然车上乘客至少有1个(司机)。上下车时要保证安全……};//定义构造函数Motorcar::Motorcar(int maxS, int w, int s, int p): Vehicle(maxS, w),seatNum(s),passengerNum(p) {}//搭载乘客,超员要拒载,有人下车时,p为负数。当然车上乘客至少有1个(司机)。上下车时要保证安全……void Motorcar::addPassenger(int p){ if (status==running) { cout<<"车辆正在行驶,停车后再上下车!"<<endl; } else { passengerNum+=p; if(passengerNum>seatNum) { passengerNum=seatNum; cout<<"涉嫌超员,已清理后达到满员!"<<endl; } else if (passengerNum<1) { passengerNum=1; cout<<"请司机不要离开岗位!"<<endl; } }}class Motorcycle: public Bicycle, public Motorcar //()摩托车类{public: Motorcycle(int maxS=90, int w=100, int s=3, int p=1, int h=0.7); //定义构造函数 void show(); //显示摩托车的运行状态};//定义构造函数Motorcycle::Motorcycle(int maxS, int w, int s, int p, int h):Vehicle(maxS, w),Bicycle(maxS, w, h),Motorcar(maxS, w, s, p) {}//显示摩托车的运行状态void Motorcycle::show(){ cout<<"状态:"; if(status==rest) cout<<"泊车;\t"; else cout<<"行进;\t"; cout<<"车速:"<<currentSpeed<<" / "<< maxSpeed <<"\t当前乘员:"<<passengerNum<<" / "<< seatNum << endl;}int main( ){ Motorcycle m; bool end=false; while (!end) { cout<<"请操作:1-启动 2-加速 3-减速 4-有人上车 5-有人下车 6-停车 0-结束"<<endl; char keydown= _getch(); //_getch()返回键盘上读取的字符,应包含头文件<conio.h> switch(keydown) { case '1': cout<<"选中的操作是1-启动\t"; m.start(); break; case '2': cout<<"选中的操作是2-加速\t"; m.speed_up(); break; case '3': cout<<"选中的操作是3-减速\t"; m.slow_down(); break; case '4': cout<<"选中的操作是4-有人上车\t"; m.addPassenger(); break; case '5': cout<<"选中的操作是5-有人下车\t"; m.addPassenger(-1); break; case '6': cout<<"选中的操作是6-停车\t"; m.stop(); break; case '0': end=true; break; } m.show(); cout<<endl; Sleep(200); //要包含头文件<windows.h> } return 0;}
教科书上面对C++虚基类的描述玄而又玄,名曰“共享继承”,名曰“各派生类的对象共享基类的的一个拷贝”,其实说白了就是解决多重多级继承造成的二义性问题。例如有基类B,从B派生出C和D,然后类F又同时继承了C和D,现在类F的一个对象里面包含了两个基类B的对象,如果F访问自己的从基类B那里继承过来的的数据成员或者函数成员那么编译器就不知道你指的到底是从C那里继承过来的B对象呢还是从D那里继承过来的B对象。
于是虚基类诞生了,将C和D的继承方式改为虚继承,那么F访问自己从B那里继承过来的成员就不会有二义性问题了,也就是将F对象里的B对象统一为一个,只有一个基类B对象,下面是一段代码说明了对虚基类的使用。
#include <iostream>
using namespace std;
class A
{
public:
int i;
void showa(){cout<<"i="<<i<<endl;}
};
class B:virtual public A //此处采用虚继承
{
public:
int j;
};
class C:virtual public A //此处采用虚继承
{
public:
int k;
};
class D:public B,public C
{
public:
int m;
};
int main()
{
A a;
B b;
C c;
a.i=1;
a.showa();
b.i=2;
b.showa();
c.i=3;
c.showa();
D d;
d.i=4;
d.showa();
//cout << "Hello world!" << endl;
return 0;
}
从这个代码我们可以看出B,C,D从A那里继承过来了i这个变量并且它们之间不会有任何影响,如果B和C不是虚继承方式的,那么d.i=4;就不能编译通过了。
- 第11周项目5-虚基类(转载)
- 第11周项目3(5)
- 第11周项目5(2)
- 第11周项目5(3)
- 第11周项目5
- 第11周项目5
- 第11周 【项目5
- 第11周【项目5
- 第11周 【项目5
- 第11周项目5-当年第几天
- 第11周项目5-当年第几天
- 第11周项目5 当年第几天
- 第11周项目5-当年第几天
- 第11周项目5当年第几天
- 第11周 项目5-当年第几天
- 第11周项目5-当年第几天
- 第11周项目5 当年第几天
- 第11周项目5-当年第几天
- Python加载图片的方法
- TrueCrypt的完美之处--WinPE下无障碍运行
- 圆形点数组,螺旋点数组生成函数
- redis 3.0的集群部署
- Java Persistence with MyBatis 3(中文版) 第四章 使用注解配置SQL映射器
- 第11周项目5-虚基类(转载)
- 【REACT NATIVE 系列教程之九】REACT NATIVE版本升级步骤与注意事项!
- apk信息查询
- eclipse 下搭建 maven项目。spring+springMvc+mybatise框架集成
- 如何用ppt做自我介绍
- iOS设计模式 - (4)策略模式
- 【REACT NATIVE 系列教程之十】真机运行报错COMMAND /BIN/SH FAILED WITH EXIT CODE 1 的解决方法
- hihoCoder1252 2015北京区域赛 D.Kejin Game
- C++编程(数组) 去除最大值和最小值,评委的平均分。