从ContainerControl类继承的子类作为容器窗体,可以容纳除Form类对象外的其余窗体对象。
在所有容器窗体内,最基本的就是顶级容器Form类以及面板容器Panel类。这两者的主要区别为:前者具有Windows标准框架(标题栏,最大化、最小化和关闭按钮,窗体边框,可调整尺寸),并且可以独立存在;后者只是一块区域,并且必须依附在某个容器窗体上,无法独立存在。除了它们的区别外,他们都具有:Controls属性,可以在上面放置控件;控件放置的位置需要通过控件的Top和Left属性或者控制。
1 绝对布局
对于容器类型的控件(包括Form类型),出了Size,Bounds属性外,还有ClientSize和ClientRectangle属性,前者表示客户区尺寸,Size类型;后者表示客户区的矩形,是一个Rectangle类型。所谓客户区,就是容器实际可以使用的空间,对于Form类型来说,客户区就是除过标题栏,四周的边框外剩余的部分。
图1 客户区示意图
一般来说,直接在Form上或Panel上放置控件,控件的位置不会自动调整,完全依赖控件的Left, Top和Location等属性控制,控件的大小也不会自动改变,完全依靠控件的Width, Height和Size等属性控制。这种方式称为绝对位置布局。
我们再来熟悉一下这些用于定位一个控件的属性们,它们可以用于获取或设置控件的位置和尺寸:
- Left属性:控件距离其容器左边界的距离,int类型;
- Top属性:控件距离其容器上边界的距离,int类型;
- Location属性:控件左上角坐标距离其容器的距离,Point类型。一般而言,可以把容器的左上角认为是坐标轴原点,则Location属性表示控件相对于其容器的坐标。所以其X属性等于控件的Left属性,Y属性等于控件的Top属性;
- Width属性:控件的宽度,int类型;
- Height属性:控件的高度,int类型;
- Size属性:控件的尺寸,包括宽度和高度,Size类型;
除了以上六个属性外,还可以使用Bounds属性,这是一个Rectangle类型的属性,表示一个相对于容器左上角为坐标原点的矩形,即控件的位置和尺寸。利用SetBounds方法还可以使用X, Y, Width, Height四个分量设置Bounds属性。
2 锚定相对布局
如果进一步设置控件的Dock属性,则可以设定控件再容器内的相对位置,Dock属性可以设置控件按照其所在容器的“左右上下中”这五个方位来放置控件,此时控件只能设置Width、Height和Size属性,而无法设置Left、Top和Location属性,即控件只能调整大小,无法自由设置位置。这种控件依照容器的相对位置放置控件的方式称为“相对位置布局”。
Dock的属性值是一个DockType枚举,其称谓为“锚定”,就是将控件和其容器的左右上下中这五个位置绑定,无论容器移动到什么地方,也无论容器的尺寸如何变化,控件始终确定在这五个位置之一的地方。这个枚举其定义如下:
/// <summary> /// 定义锚定方位的枚举 /// </summary> public enum DockStyle { /// <summary> /// 取消锚定 /// </summary> None = 0, /// <summary> /// 锚定在顶部 /// </summary> Top = 1, /// <summary> /// 锚定在底部 /// </summary> Bottom = 2, /// <summary> /// 锚定在左边 /// </summary> Left = 3, /// <summary> /// 锚定在右边 /// </summary> Right = 4, /// <summary> /// 锚定在中央并充满容器 /// </summary> Fill = 5, }图2 锚定布局方位图
下面我们用一段代码来演示一下:
1 using System;2 using System.Drawing;3 using System.Windows.Forms;4 5 namespace Edu.Study.Graphics.DockLayout {6 7 /// <summary>8 /// 继承Form类, 定义窗体类9 /// </summary>10 class MyForm : Form {11 12 // 以不变模式设定WIN_TITLE, 表示窗体标题13 private const string WIN_TITLE = "面板演示";14 15 /// <summary>16 /// 面板类17 /// </summary>18 private Panel panel;19 20 /// <summary>21 /// 按钮22 /// </summary>23 private Button button;24 25 /// <summary>26 /// 单选按钮数组27 /// </summary>28 private RadioButton[] radioButtons;29 30 /// <summary>31 /// 构造器32 /// </summary>33 public MyForm() {34 // 设定窗体标题35 this.Text = WIN_TITLE;36 // 设定窗体最大化37 this.WindowState = FormWindowState.Maximized;38 39 // 实例化面板类对象40 this.panel = new Panel();41 // 设置面板的边框为三维效果42 this.panel.BorderStyle = BorderStyle.Fixed3D;43 // 设定面板的锚定方式为无44 this.panel.Dock = DockStyle.None;45 // 设定面板的背景色为白色46 this.panel.BackColor = Color.White;47 // 为面板更改尺寸事件绑定委托方法48 this.panel.Resize += new EventHandler(OnPanelResized);49 50 // 实例化按钮对象51 this.button = new Button();52 // 因为button是panel的子窗体, 所以背景色默认也会变为白色53 // 这里为按钮重新指定颜色, SystemColors.Control是操作系统默认的控件背景色54 this.button.BackColor = SystemColors.Control;55 // 设置按钮文本56 button.Text = "点下我!";57 // 为按钮点击事件绑定委托方法58 button.Click += new EventHandler(OnButtonClick);59 60 // 将按钮加入面板61 this.panel.Controls.Add(this.button);62 63 // 实例化radioButtons数组, 数组长度和锚定样式数量相同64 this.radioButtons = new RadioButton[(int)DockStyle.Fill + 1];65 for (int i = 0; i < this.radioButtons.Length; i++) {66 RadioButton rb = new RadioButton();67 // 设定RadioButton的显示文本68 rb.Text = ((DockStyle)i).ToString();69 70 // 将RadioButton对象加入面板71 this.panel.Controls.Add(rb);72 // 为数组元素赋值RadioButton对象引用73 this.radioButtons[i] = rb;74 }75 76 // 将面板加入窗体77 this.Controls.Add(this.panel);78 }79 80 /// <summary>81 /// 处理按钮点击事件的委托方法82 /// </summary>83 private void OnButtonClick(object sender, EventArgs e) {84 85 // 设置面板的宽度和高度为父窗体的1/386 this.panel.Width = this.ClientSize.Width / 3;87 this.panel.Height = this.ClientSize.Height / 3;88 89 // 每点击一次按钮, 更改面板的锚定方式90 if (this.panel.Dock == DockStyle.Fill) {91 this.panel.Dock = DockStyle.None;92 } else {93 this.panel.Dock = (DockStyle)this.panel.Dock + 1;94 }95 96 // 更改主窗体标题97 this.Text = String.Format("{0} 面板的锚定方式目前为:{1}", WIN_TITLE, this.panel.Dock);98 this.radioButtons[(int)this.panel.Dock].Checked = true;99 }100 101 /// <summary>102 /// 面板尺寸改变事件委托方法103 /// </summary>104 private void OnPanelResized(object sender, EventArgs e) {105 // 在面板改变尺寸后, 设置按钮位于面板中央106 this.button.Left = (this.panel.ClientSize.Width - this.button.Width) / 2;107 this.button.Top = (this.panel.ClientSize.Height - this.button.Height) / 2;108 109 // 间隔距离110 int marginPart = 0;111 // 起始位置112 int start = 0;113 // 遍历RadioButton数组, 设置每一个RadioButton的位置114 foreach (RadioButton rb in this.radioButtons) {115 // 根据面板的锚定方式选择计算位置的分支116 switch (this.panel.Dock) {117 case DockStyle.Fill:118 case DockStyle.Top:119 case DockStyle.Bottom:120 // 对于填充, 置顶, 置底三种锚定方式, 采用横向摆放RadioButton控件121 122 // 设定每个RadioButton的上边距为面板高度的四分之一123 rb.Top = this.panel.ClientSize.Height / 4;124 125 // 计算每个RadioButton控件的间距126 if (marginPart == 0) {127 marginPart = this.ClientSize.Width / this.radioButtons.Length;128 start = marginPart;129 }130 131 // 按照RadioButton的间距等距设定其左边距132 rb.Left = start - rb.Width;133 break;134 case DockStyle.Left:135 case DockStyle.Right:136 // 对于靠左、靠右两种种锚定方式, 采用纵向摆放RadioButton控件137 138 // 设定RadioButton的左边距为面板宽度的四分之一139 rb.Left = this.panel.ClientSize.Width / 4;140 if (this.panel.Dock == DockStyle.Right) {141 // 如果面板靠右锚定, 设置RadioButton的左边距为面板的四分之三142 rb.Left = this.panel.ClientSize.Width - rb.Width;143 }144 145 // 计算每个RadioButton控件的间距146 if (marginPart == 0) {147 marginPart = this.ClientSize.Height / this.radioButtons.Length;148 }149 // 按照RadioButton的高度垂直等间距设置上边距150 rb.Top = start + rb.Height;151 break;152 }153 start += marginPart;154 }155 }156 }157 158 159 static class Program {160 static void Main() {161 Application.EnableVisualStyles();162 Application.SetCompatibleTextRenderingDefault(false);163 Application.Run(new MyForm());164 }165 }166 }本章代码下载
可以看到,在主窗体上,我们放置了一个面板(Panel),面板上有一个按钮(Button)和五个单项按钮(RadioButton),第40-77行代码是Form类构造器,实例化并创建了上述控件,并将它们都加入各自的容器(这里将Panel的容器设置为From)。对于面板,我们绑定了它的Resize事件,当面板尺寸发生改变时引发,执行OnPanelResized方法(第104-156行);对于按钮,我们绑定了它的Click事件,当按钮点击时引发,执行OnButtonClick方法(第83-99行)。
在OnButtonClick方法中,重新定义了面板的尺寸,然后将面板的Dock属性切换为另一个值。所以我们可以看到,一旦点击按钮,面板的位置就会发生变化,分别会位于Form容器的上(值为1)、下(值为2)、左(值为3)、右(值为4)、中(值为5)几个位置,而面板的Dock属性为None(值为0)时,面板绝对定位位置,不在按照锚定位置布局。如下图:
图3 锚定方位示意图
可以看到,当Dock属性为DockStyle.Top或DocStyle.Bottom时,只能设置控件的Height属性,其它位置和尺寸属性均无效;当设置为DockType.Left或DocType.Right时,只能设置控件的Width属性,其它属性无效。当控件的Dock属性为DockType.None时,则控件的位置按照其Top,Left和Location属性定位,控件的尺寸按照其Width,Height和Size属性来设定。
在OnPanelResized方法中,由于按钮和单选按钮都没有设定其Dock属性(即Dock属性为DockType.None),所以我们采用绝对定位,通过一个简单的算法,根据面板当前的的锚定方式,计算按钮和五个单选按钮的位置。如果是面板按照DockType.Top, DockType.Buttom, DockType.Fill布局,则单选按钮按照横向平均间距布局,否则按照纵向平均间距布局,对于DockType.None不作处理。
通过上面的比较可以看出,绝对布局存在的问题是:除非不允许容器改变大小,否则容器一旦改变尺寸,将会破坏布局结构,而相对布局则不存在这个问题。