linux shell编程之——if语句
来源:互联网 发布:微课录屏制作软件 编辑:程序博客网 时间:2024/06/05 15:46
一、语句格式
一行中的写法:if TEST-COMMANDS; then CONSEQUENT-COMMANDS; fi
多行的写法:
if 条件
then
Command
else
Command
fi
基本语法记住亮点:
1、按照汉语的方式记忆:如果(if)xxx那么(then)就xxx,否则(else)就xxx
2、记住要使用fi作为结束
记住上述两点,基本上就可以掌握if的基本语法了。
二、表达式
Primary 意义
[ -a FILE ] 如果 FILE 存在则为真。
[ -b FILE ] 如果 FILE 存在且是一个块特殊文件则为真。
[ -c FILE ] 如果 FILE 存在且是一个字特殊文件则为真。
[ -d FILE ] 如果 FILE 存在且是一个目录则为真。
[ -e FILE ] 如果 FILE 存在则为真。
[ -f FILE ] 如果 FILE 存在且是一个普通文件则为真。
[ -g FILE ] 如果 FILE 存在且已经设置了SGID则为真。
[ -h FILE ] 如果 FILE 存在且是一个符号连接则为真。
[ -k FILE ] 如果 FILE 存在且已经设置了粘制位则为真。
[ -p FILE ] 如果 FILE 存在且是一个名字管道(F如果O)则为真。
[ -r FILE ] 如果 FILE 存在且是可读的则为真。
[ -s FILE ] 如果 FILE 存在且大小不为0则为真。
[ -t FD ] 如果文件描述符 FD 打开且指向一个终端则为真。
[ -u FILE ] 如果 FILE 存在且设置了SUID (set user ID)则为真。
[ -w FILE ] 如果 FILE 如果 FILE 存在且是可写的则为真。
[ -x FILE ] 如果 FILE 存在且是可执行的则为真。
[ -O FILE ] 如果 FILE 存在且属有效用户ID则为真。
[ -G FILE ] 如果 FILE 存在且属有效用户组则为真。
[ -L FILE ] 如果 FILE 存在且是一个符号连接则为真。
[ -N FILE ] 如果 FILE 存在 and has been mod如果ied since it was last read则为真。
[ -S FILE ] 如果 FILE 存在且是一个套接字则为真。
[ FILE1 -nt FILE2 ] 如果 FILE1 has been changed more recently than FILE2, or 如果 FILE1FILE2 does not则为真。 exists and
[ FILE1 -ot FILE2 ] 如果 FILE1 比 FILE2 要老, 或者 FILE2 存在且 FILE1 不存在则为真。
[ FILE1 -ef FILE2 ] 如果 FILE1 和 FILE2 指向相同的设备和节点号则为真。
[ -o OPTIONNAME ] 如果 shell选项 “OPTIONNAME” 开启则为真。
[ -z STRING ] “STRING” 的长度为零则为真。
[ -n STRING ] or [ STRING ] “STRING” 的长度为非零 non-zero则为真。
[ STRING1 == STRING2 ] 如果2个字符串相同。 “=” may be used instead of “==” for strict POSIX compliance则为真。
[ STRING1 != STRING2 ] 如果字符串不相等则为真。
[ STRING1 < STRING2 ] 如果 “STRING1” sorts before “STRING2” lexicographically in the current locale则为真。
[ STRING1 > STRING2 ] 如果 “STRING1” sorts after “STRING2” lexicographically in the current locale则为真。
[ ARG1 OP ARG2 ] “OP” is one of -eq, -ne, -lt, -le, -gt or -ge. These arithmetic binary operators return true if “ARG1” is equal to, not equal to, less than, less than or equal to, greater than, or greater than or equal to “ARG2”, respectively. “ARG1” and “ARG2” are integers.
表达式可以借以下操作符组合起来,以降序列出:listed in decreasing order of precedence:
表达式中如果使用 -a 那么就是and -o就是or
一行中的写法:if TEST-COMMANDS; then CONSEQUENT-COMMANDS; fi
多行的写法:
if 条件
then
Command
else
Command
fi
基本语法记住亮点:
1、按照汉语的方式记忆:如果(if)xxx那么(then)就xxx,否则(else)就xxx
2、记住要使用fi作为结束
记住上述两点,基本上就可以掌握if的基本语法了。
二、表达式
Primary 意义
[ -a FILE ] 如果 FILE 存在则为真。
[ -b FILE ] 如果 FILE 存在且是一个块特殊文件则为真。
[ -c FILE ] 如果 FILE 存在且是一个字特殊文件则为真。
[ -d FILE ] 如果 FILE 存在且是一个目录则为真。
[ -e FILE ] 如果 FILE 存在则为真。
[ -f FILE ] 如果 FILE 存在且是一个普通文件则为真。
[ -g FILE ] 如果 FILE 存在且已经设置了SGID则为真。
[ -h FILE ] 如果 FILE 存在且是一个符号连接则为真。
[ -k FILE ] 如果 FILE 存在且已经设置了粘制位则为真。
[ -p FILE ] 如果 FILE 存在且是一个名字管道(F如果O)则为真。
[ -r FILE ] 如果 FILE 存在且是可读的则为真。
[ -s FILE ] 如果 FILE 存在且大小不为0则为真。
[ -t FD ] 如果文件描述符 FD 打开且指向一个终端则为真。
[ -u FILE ] 如果 FILE 存在且设置了SUID (set user ID)则为真。
[ -w FILE ] 如果 FILE 如果 FILE 存在且是可写的则为真。
[ -x FILE ] 如果 FILE 存在且是可执行的则为真。
[ -O FILE ] 如果 FILE 存在且属有效用户ID则为真。
[ -G FILE ] 如果 FILE 存在且属有效用户组则为真。
[ -L FILE ] 如果 FILE 存在且是一个符号连接则为真。
[ -N FILE ] 如果 FILE 存在 and has been mod如果ied since it was last read则为真。
[ -S FILE ] 如果 FILE 存在且是一个套接字则为真。
[ FILE1 -nt FILE2 ] 如果 FILE1 has been changed more recently than FILE2, or 如果 FILE1FILE2 does not则为真。 exists and
[ FILE1 -ot FILE2 ] 如果 FILE1 比 FILE2 要老, 或者 FILE2 存在且 FILE1 不存在则为真。
[ FILE1 -ef FILE2 ] 如果 FILE1 和 FILE2 指向相同的设备和节点号则为真。
[ -o OPTIONNAME ] 如果 shell选项 “OPTIONNAME” 开启则为真。
[ -z STRING ] “STRING” 的长度为零则为真。
[ -n STRING ] or [ STRING ] “STRING” 的长度为非零 non-zero则为真。
[ STRING1 == STRING2 ] 如果2个字符串相同。 “=” may be used instead of “==” for strict POSIX compliance则为真。
[ STRING1 != STRING2 ] 如果字符串不相等则为真。
[ STRING1 < STRING2 ] 如果 “STRING1” sorts before “STRING2” lexicographically in the current locale则为真。
[ STRING1 > STRING2 ] 如果 “STRING1” sorts after “STRING2” lexicographically in the current locale则为真。
[ ARG1 OP ARG2 ] “OP” is one of -eq, -ne, -lt, -le, -gt or -ge. These arithmetic binary operators return true if “ARG1” is equal to, not equal to, less than, less than or equal to, greater than, or greater than or equal to “ARG2”, respectively. “ARG1” and “ARG2” are integers.
表达式可以借以下操作符组合起来,以降序列出:listed in decreasing order of precedence:
表达式中如果使用 -a 那么就是and -o就是or
0 0
- linux shell编程之——if语句
- shell编程—if语句
- Linux Shell编程之 for循环语句 if条件语句
- shell 编程之 if 语句
- shell编程——if语句
- shell编程——if语句
- shell编程——if语句
- shell编程——if语句
- shell编程——if语句
- shell编程——if语句
- shell编程——if语句
- shell编程——if语句
- shell编程——if语句
- shell编程——if语句
- shell编程——if语句
- shell编程——if语句
- shell编程——if语句
- shell编程——if语句
- NodeJS基础API搭建服务器详细过程记录
- 【总结】软件工程视频(一)
- Android 加载动画(关于SpinKit的使用)
- leetcode_413. Arithmetic Slices 数组中连续的等差数列个数
- 第1章 ECS
- linux shell编程之——if语句
- 构建 Android APP 一定要绕过的 30 个坑
- wikioi 2315 longge的问题 2012年省队选拔赛山东(欧拉函数应用)
- python读取excel数据
- HTML5十五大新特性
- vue里一些问题
- 杂乱数据点滴笔记
- React-Native 'RCTRootView.h' file not found AppDelegate.m
- 欢迎使用CSDN-markdown编辑器