C--字符串操作函数
来源:互联网 发布:仿 购物商城 app 源码 编辑:程序博客网 时间:2024/05/16 15:44
1.函数名: strcpy
功 能: 拷贝一个字符串到另一个字符串
2.函数名: strcat
功 能: 把src所指字符串添加到dest结尾处(覆盖dest结尾处的'\0')
3.函数名: strchr
功 能: 在一个串中查找给定字符的第一个匹配之处\
4.函数名: strcmp
功 能: 串比较
5.函数名: strncmpi
功 能: 将一个串中的一部分与另一个串比较, 大小写不敏感
6.函数名: strcspn
功 能: 在串中查找第一个给定字符集内容的段
7.函数名: strdup
功 能: 将串拷贝到新建的位置处
8.函数名: stricmp
功 能: 以大小写不敏感方式比较两个串
9.函数名: strerror
功 能: 返回指向错误信息字符串的指针
10.函数名: strcmpi
功 能: 将一个串与另一个比较, 不管大小写
11.函数名: strncmp
功 能: 串比较
12.函数名: strncmpi
功 能: 把串中的一部分与另一串中的一部分比较, 不管大小写
13.函数名: strncpy
功 能: 串拷贝
14.函数名: strnicmp
功 能: 不注重大小写地比较两个串
15.函数名: strnset
功 能: 将一个串中的所有字符都设为指定字符
16.函数名: strpbrk
功 能: 在串中查找给定字符集中的字符
17.函数名: strrchr
功 能: 在串中查找指定字符的最后一个出现 用 法: char *strrchr(char *str, char c);
18.函数名: strrev
功 能: 串倒转
19.函数名: strset
20.函数名: strspn
功 能: 在串中查找指定字符集的子集的第一次出现
21.函数名: strstr
功 能: 在串中查找指定字符串的第一次出现
22.函数名: strtod
功 能: 将字符串转换为double型值
23.函数名: strtok
功 能: 查找由在第二个串中指定的分界符分隔开的单词
24.函数名: strtol
功 能: 将串转换为长整数
25.函数名: swab
功 能: 交换字节
26.函数名:fprintf
函数根据指定的format(格式)发送信息(参数)到由stream(流)指定的文件. fprintf()只能和printf()一样工作. fprintf()的返回值是输出的字符数,发生错误时返回一个负值.
27.函数名 sprintf
功能:字符串格式化命令,主要功能是把格式化的数据写入某个字符串中
28.函数名snprintf
功能:将可变个参数(...)按照format格式化成字符串,然后将其复制到str中
功 能: 拷贝一个字符串到另一个字符串
用 法: char *strcpy(char *destin, char *source);
说明:src和dest所指内存区域不可以重叠且destin必须有足够的空间来容纳src的字符串。返回指向destin的指针。
程序例:
#include <stdio.h>
#include <string.h>
int main(void) {
char string[10];
char *str1 = "abcdefghi";
stpcpy(string, str1);
printf("%s\n", string);
return 0;
}
2.函数名: strcat
功 能: 把src所指字符串添加到dest结尾处(覆盖dest结尾处的'\0')
用 法: char *strcat(char *destin, char *source);
说明:src和dest所指内存区域不可以重叠且dest必须有足够的空间来容纳src的字符串。
返回指向dest的指针。
程序例:
#include <string.h>
##include<stdio.h>
int main(void) {
char destination[25];
char *blank = " ",*c = "C++", *Borland = "Borland";
strcpy(destination, Borland);
strcat(destination, blank);
strcat(destination, c);
printf("%s\n", destination);
return 0;
}
3.函数名: strchr
功 能: 在一个串中查找给定字符的第一个匹配之处\
用 法: char *strchr(char *str, char c);
说明:返回首次出现c的位置的指针,返回的地址是被查找字符串指针开始的第一个与c相同字符的指针,如果Str中不存在Val则返回NULL。
程序例:
#include <string.h>
#include <stdio.h>
int main(void) {
char string[15];
char *ptr, c = 'r';
strcpy(string, "This is a string");
ptr = strchr(string, c);
if (ptr)
printf("The character %c is at position: %d\n", c, ptr-string); //ptr 是c的地址减去字符串的首地址则为c
// 在该字符串中的位置
else
printf("The character was not found\n");
return 0;
}
4.函数名: strcmp
功 能: 串比较
用 法: int strcmp(char *str1, char *str2);
说明:
当s1<s2时,返回为负数;
当s1=s2时,返回值= 0;
当s1>s2时,返回正数。
即:两个字符串自左向右逐个字符相比(按ASCII值大小相比较),直到出现不同的字符或遇'\0'为止。如:
"A"<"B" "a">"A" "computer">"compare"
特别注意:strcmp(const char *s1,const char * s2)这里面只能比较字符串,即可用于比较两个字符串常量,或比较数组和字符串常量,不能比较数字等其他形式的参数。
程序例:
#include <string.h>
#include <stdio.h>
int main(void) {
char *buf1 = "aaa", *buf2 = "bbb", *buf3 = "ccc";
int ptr;
ptr = strcmp(buf2, buf1);
if (ptr > 0)
printf("buffer 2 is greater than buffer 1\n");
else
printf("buffer 2 is less than buffer 1\n");
ptr = strcmp(buf2, buf3);
if (ptr > 0)
printf("buffer 2 is greater than buffer 3\n");
else
printf("buffer 2 is less than buffer 3\n");
return 0;
}
5.函数名: strncmpi
功 能: 将一个串中的一部分与另一个串比较, 大小写不敏感
用 法: int strncmpi(char *str1, char *str2, unsigned maxlen);
说明:
strncmpi是到strnicmp的宏定义
当s1<s2时,返回值<0
当s1=s2时,返回值=0
当s1>s2时,返回值>0
程序例:
#include <string.h>
#include <stdio.h>
int main(void) {
char *buf1 = "BBB", *buf2 = "bbb";
int ptr;
ptr = strcmpi(buf2, buf1);
if (ptr > 0)
printf("buffer 2 is greater than buffer 1\n");
if (ptr < 0)
printf("buffer 2 is less than buffer 1\n");
if (ptr == 0)
printf("buffer 2 equals buffer 1\n");
return 0;
}
6.函数名: strcspn
功 能: 在串中查找第一个给定字符集内容的段
用 法: int strcspn(char *str1, char *str2);
说明:strcspn()从参数str1 字符串的开头计算连续的字符, 而这些字符都完全不在参数str2 所指的字符
串中. 简单地说, 若strcspn()返回的数值为n, 则代表字符串str1 开头连续有n 个字符都不是字符串str2 内的字符.
返回值:返回字符串str1 开头连续不含字符串str2 内的字符数目
程序例:
#include <stdio.h>
#include <string.h>
#include <alloc.h>
int main(void) {
char *string1 = "1234567890";
char *string2 = "747DC8";
int length;
length = strcspn(string1, string2);
printf("Character where strings intersect is at position %d\n", length);
return 0;
}
7.函数名: strdup
功 能: 将串拷贝到新建的位置处
用 法: char *strdup(char *str);
说明:strdup()在内部调用了malloc()为变量分配内存,不需要使用返回的字符串时,需要用free()释放相应的内存空间,否则会造成内存泄漏。
程序例:
#include <stdio.h>
#include <string.h>
#include <alloc.h>
int main(void)
{
char *dup_str, *string = "abcde";
dup_str = strdup(string);
printf("%s\n", dup_str);
free(dup_str);
return 0;
}
8.函数名: stricmp
功 能: 以大小写不敏感方式比较两个串
用 法: int stricmp(char *str1, char *str2);
说明:strcmpi是到stricmp的宏定义,实际未提供此函数。
当s1<s2时,返回值<0
当s1=s2时,返回值=0
当s1>s2时,返回值>0
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char *buf1 = "BBB", *buf2 = "bbb";
int ptr;
ptr = stricmp(buf2, buf1);
if (ptr > 0)
printf("buffer 2 is greater than buffer 1\n");
if (ptr < 0)
printf("buffer 2 is less than buffer 1\n");
if (ptr == 0)
printf("buffer 2 equals buffer 1\n");
return 0;
}
9.函数名: strerror
功 能: 返回指向错误信息字符串的指针
用 法: char *strerror(int errnum);
程序例:
#include<stdio.h>
#include<errno.h>
int main(void)
{
char *buffer;
buffer = strerror(errno);
printf("Error: %s\n", buffer);
return 0;
}
10.函数名: strcmpi
功 能: 将一个串与另一个比较, 不管大小写
用 法: int strcmpi(char *str1, char *str2);
程序例:
#include<string.h>
#include<stdio.h>
int main(void)
{
char *buf1 = "BBB", *buf2 = "bbb";
int ptr;
ptr = strcmpi(buf2, buf1);
if (ptr > 0)
printf("buffer 2 is greater than buffer 1\n");
if (ptr < 0)
printf("buffer 2 is less than buffer 1\n");
if (ptr == 0)
printf("buffer 2 equals buffer 1\n");
return 0;
}
11.函数名: strncmp
功 能: 串比较
用 法: int strncmp(char *str1, char *str2, int maxlen);
程序例:
#include<string.h>
#include<stdio.h>
int main(void)
{
char *buf1 = "aaabbb", *buf2 = "bbbccc", *buf3 = "ccc";
int ptr;
ptr = strncmp(buf2,buf1,3);
if (ptr > 0)
printf("buffer 2 is greater than buffer 1\n");
else
printf("buffer 2 is less than buffer 1\n");
ptr = strncmp(buf2,buf3,3);
if (ptr > 0)
printf("buffer 2 is greater than buffer 3\n");
else
printf("buffer 2 is less than buffer 3\n");
return(0);
}
12.函数名: strncmpi
功 能: 把串中的一部分与另一串中的一部分比较, 不管大小写
用 法: int strncmpi(char *str1, char *str2);
程序例:
#include<string.h> #include<stdio.h>
int main(void)
{
char *buf1 = "BBBccc", *buf2 = "bbbccc";
int ptr;
ptr = strncmpi(buf2,buf1,3);
if (ptr > 0)
printf("buffer 2 is greater than buffer 1\n");
if (ptr < 0)
printf("buffer 2 is less than buffer 1\n");
if (ptr == 0)
printf("buffer 2 equals buffer 1\n");
return 0;
}
13.函数名: strncpy
功 能: 串拷贝
用 法: char *strncpy(char *destin, char *source, int maxlen);
程序例:
#include<stdio.h>
#include<string.h>
int main(void)
{
char string[10];
char *str1 = "abcdefghi";
strncpy(string, str1, 3);
string[3] = '\0';
printf("%s\n", string);
return 0;
}
14.函数名: strnicmp
功 能: 不注重大小写地比较两个串
用 法: int strnicmp(char *str1, char *str2, unsigned maxlen);
程序例:
#include<string.h>
#include<stdio.h>
int main(void)
{
char *buf1 = "BBBccc", *buf2 = "bbbccc";
int ptr;
ptr = strnicmp(buf2, buf1, 3);
if (ptr > 0)
printf("buffer 2 is greater than buffer 1\n");
if (ptr < 0)
printf("buffer 2 is less than buffer 1\n");
if (ptr == 0)
printf("buffer 2 equals buffer 1\n");
return 0;
}
15.函数名: strnset
功 能: 将一个串中的所有字符都设为指定字符
用 法: char *strnset(char *str, char ch, unsigned n);
程序例:
#include<stdio.h>
#include<string.h>
int main(void)
{
char *string = "abcdefghijklmnopqrstuvwxyz";
char letter = 'x';
printf("string before strnset: %s\n", string);
strnset(string, letter, 13);
printf("string after strnset: %s\n", string);
return 0;
}
16.函数名: strpbrk
功 能: 在串中查找给定字符集中的字符
用 法: char *strpbrk(char *str1, char *str2);
程序例:
#include<stdio.h>
#include<string.h>
int main(void)
{
char *string1 = "abcdefghijklmnopqrstuvwxyz";
char *string2 = "onm";
char *ptr;
ptr = strpbrk(string1, string2);
if (ptr)
printf("strpbrk found first character: %c\n", *ptr);
else
printf("strpbrk didn't find character in set\n");
return 0;
}
17.函数名: strrchr
功 能: 在串中查找指定字符的最后一个出现 用 法: char *strrchr(char *str, char c);
程序例:
#include<string.h>
#include<stdio.h>
int main(void)
{
char string[15];
char *ptr, c = 'r';
strcpy(string, "This is a string");
ptr = strrchr(string, c);
if (ptr)
printf("The character %c is at position: %d\n", c, ptr-string);
else
printf("The character was not found\n");
return 0;
}
18.函数名: strrev
功 能: 串倒转
用 法: char *strrev(char *str);
程序例:
#include<string.h>
#include<stdio.h>
int main(void)
{
char *forward = "string";
printf("Before strrev(): %s\n", forward);
strrev(forward);
printf("After strrev(): %s\n", forward);
return 0;
}
19.函数名: strset
功 能: 将一个串中的所有字符都设为指定字符
用 法: char *strset(char *str, char c);
程序例:
#include<stdio.h>
#include<string.h>
int main(void) {
char string[10] = "123456789";
char symbol = 'c';
printf("Before strset(): %s\n", string);
strset(string, symbol);
printf("After strset(): %s\n", string);
return 0;
}
20.函数名: strspn
功 能: 在串中查找指定字符集的子集的第一次出现
用 法: int strspn(char *str1, char *str2);
程序例:
#include<stdio.h>
#include<string.h>
#include<alloc.h>
int main(void)
{
char *string1 = "1234567890";
char *string2 = "123DC8";
int length;
length = strspn(string1, string2);
printf("Character where strings differ is at position %d\n", length);
return 0;
}
21.函数名: strstr
功 能: 在串中查找指定字符串的第一次出现
用 法: char *strstr(char *str1, char *str2);
程序例:
#include<stdio.h>
#include<string.h>
int main(void)
{
char *str1 = "Borland International", *str2 = "nation", *ptr;
ptr = strstr(str1, str2);
printf("The substring is: %s\n", ptr);
return 0;
}
22.函数名: strtod
功 能: 将字符串转换为double型值
用 法: double strtod(char *str, char **endptr);
程序例:
#include<stdio.h>
#include<stdlib.h>
int main(void)
{
char input[80], *endptr;
double ;
printf("Enter a floating point number:");
gets(input);
strtod(input, &endptr);
printf("The string is %s the number is %lf\n", input, );
return 0;
}
23.函数名: strtok
功 能: 查找由在第二个串中指定的分界符分隔开的单词
用 法: char *strtok(char *str1, char *str2);
程序例:
#include<string.h>
#include<stdio.h>
int main(void)
{
char input[16] = "abc,d";
char *p;
/* strtok places a NULL terminator in front of the token, if found */
p = strtok(input, ",");
if (p)
printf("%s\n", p);
/* A second call to strtok using a NULL
as the first parameter returns a pointer
to the character following the token
*/
p = strtok(NULL, ",");
if (p)
printf("%s\n", p);
return 0;
}
24.函数名: strtol
功 能: 将串转换为长整数
用 法: long strtol(char *str, char **endptr, int base);
程序例:
#include<stdlib.h>
#include<stdio.h>
int main(void)
{
char *string = "87654321", *endptr;
long lnumber;
/* strtol converts string to long integer */
lnumber = strtol(string, &endptr, 10);
printf("string = %s long = %ld\n", string, lnumber);
return 0;
}
函数名: strupr
功 能: 将串中的小写字母转换为大写字母
用 法: char *strupr(char *str);
程序例:
#include<stdio.h>
#include<string.h>
int main(void)
{
char *string = "abcdefghijklmnopqrstuvwxyz", *ptr;
/* converts string to upper case characters */
ptr = strupr(string); printf("%s\n", ptr);
return 0;
}
25.函数名: swab
功 能: 交换字节
用 法: void swab (char *from, char *to, int nbytes);
程序例:
#include<stdlib.h>
#include<stdio.h>
#include<string.h>
char source[15] = "rFna koBlrna d"; char target[15];
int main(void) {
swab(source, target, strlen(source));
printf("This is target: %s\n", target);
return 0;
}
26.函数名:fprintf
int fprintf (FILE* stream, const char*format, [argument])
fprintf()函数根据指定的format(格式)发送信息(参数)到由stream(流)指定的文件. fprintf()只能和printf()一样工作. fprintf()的返回值是输出的字符数,发生错误时返回一个负值.
FILE*stream:文件指针
const char* format:输出格式
[argument]:附加参数列表
%d, %i 十进制有符号整数
%u 十进制无符号整数
%f 浮点数
%s 字符串
%c 单个字符
%p指针的值
%e, %E 指数形式的浮点数
%x无符号以小写十六进制表示的整数
%X 无符号以大写十六进制表示的整数
%o 无符号以八进制表示的整数
%g 自动选择合适的表示法
#include <stdio.h>
int main(void)
{
FILE *FSPOINTER;
char STRBUFF[16] = "Hello World."
//...
FSPOINTER = fopen("HELLO.TXT", "w+");
//...
fprintf(FSPOINTER, "%s", STRBUFF);
//...
return 0;
};
输出至文件HELLO.TXT:
Hello World
27.函数名 sprintf
int sprintf( char *buffer, const char *format, [ argument] … );
功能:字符串格式化命令,主要功能是把格式化的数据写入某个字符串中
buffer:char型指针,指向将要写入的字符串的缓冲区。
format:格式化字符串。
[argument]...:可选参数,可以是任何类型的数据。
返回值:字符串长度(strlen)
#include <stdio.h>
int main()
{
int a=8,b=9,n;
char buf[200];
sprintf(buf,"%d + %d = %d ",a,b,a+b);
printf("%s\n",buf);
return 0;
}
结果:8 + 9 = 17
28.函数名snprintf
int snprintf(char *str, size_t size, const char *format, ...)
功能:将可变个参数(...)按照format格式化成字符串,然后将其复制到str中
(1) 如果格式化后的字符串长度 < size,则将此字符串全部复制到str中,并给其后添加一个字符串结束符('\0');
(2) 如果格式化后的字符串长度 >= size,则只将其中的(size-1)个字符复制到str中,并给其后添加一个字符串结束符('\0'),返回值为欲写入的字符串长度。
#include <stdio.h>
int main()
{
int a =1234;
char buf[200];
snprintf(buf,200,"%d%d",a,456);
printf("%s\n",buf);
return 0;
}
结果是:1234456
实例:建立一个text.txt文件,并写入字符串
#include <stdio.h>
#include <string.h>
int main()
{
FILE *fp; //定义一个文件指针
char temp[1024];
fp = fopen("text.txt","wb");//只读的方式打开一个二进制text.txt文件(若不存在则新建一个,若存在,清除原先的内容)
if(NULL == fp)//打开失败
{
printf("open file fault.\n");
return -1;
}
while(1)
{
scanf("%s",temp); //向数组中写入数据
if(0==struct studentmp(temp,"end"))//如果输入end则结束输入
{
break;
}
struct studentat(temp,"\n");
fwrite(temp,sizeof(char),strlen(temp),fp);//向fp指向的文件text.txt中写入temp数组中的内容,sizeof(char)每个元素所占的字节数,strlen(temp)要写入多少个这样的元素
}
fclose(fp);//关闭text.txt文件
return 0;
}
- C字符串操作函数
- C字符串操作函数
- C字符串操作函数
- c 字符串操作函数
- C--字符串操作函数
- C语言字符串操作函数
- C字符串操作函数实现
- C语言字符串操作函数
- C语言字符串操作函数
- C语言字符串操作函数
- C语言字符串操作函数
- C语言字符串操作函数
- C字符串操作函数代码
- C中的字符串操作函数
- C字符串操作函数实现
- C语言字符串操作函数
- C语言字符串操作函数
- C语言 字符串操作函数
- NOIP2016 的一些记录
- Hibernate3.3(5)
- Arduino 舵机介绍及常用函数
- 圆周率问题
- 蜜汁错误
- C--字符串操作函数
- 栈回溯技术及uClibc的堆实现原理
- get_included_files函数
- poj2955(括号匹配问题)
- Spring 实现动态注册Bean
- 欢迎使用CSDN-markdown编辑器
- SAP推出下一代数字转型平台SAP HANA 2
- 更新订单内多个商品的数量---在存在相同商品id时。
- 从1到n整数中1出现的次数