LCD灯
来源:互联网 发布:淘宝虚拟类目直通车 编辑:程序博客网 时间:2024/05/16 00:42
/*-----------------------------------------------
名称:LCD1602
论坛:www.doflye.net
编写:shifang
日期:2009.5
修改:无
内容:通过标准程序静态显示字符
引脚定义如下:1-VSS 2-VDD 3-V0 4-RS 5-R/W 6-E 7-14 DB0-DB7 15-BLA 16-BLK
------------------------------------------------*/
#include<reg52.h> //包含头文件,一般情况不需要改动,头文件包含特殊功能寄存器的定义
#include<intrins.h>
sbit RS = P2^4; //定义端口
sbit RW = P2^5;
sbit EN = P2^6;
#define RS_CLR RS=0
#define RS_SET RS=1
#define RW_CLR RW=0
#define RW_SET RW=1
#define EN_CLR EN=0
#define EN_SET EN=1
#define DataPort P0
unsigned char *time = "23-58-49";
/*------------------------------------------------
uS延时函数,含有输入参数 unsigned char t,无返回值
unsigned char 是定义无符号字符变量,其值的范围是
0~255 这里使用晶振12M,精确延时请使用汇编,大致延时
长度如下 T=tx2+5 uS
------------------------------------------------*/
void DelayUs2x(unsigned char t)
{
while(--t);
}
void delay(int n)
{
int i,j;
for(i = 0;i < 255;i++)
for( j = 0; j < n;j++)
{}
}
/*------------------------------------------------
mS延时函数,含有输入参数 unsigned char t,无返回值
unsigned char 是定义无符号字符变量,其值的范围是
0~255 这里使用晶振12M,精确延时请使用汇编
------------------------------------------------*/
void DelayMs(unsigned char t)
{
while(t--)
{
//大致延时1mS
DelayUs2x(245);
DelayUs2x(245);
}
}
/*------------------------------------------------
判忙函数
------------------------------------------------*/
/*bit LCD_Check_Busy(void)
{
DataPort= 0xFF;
RS_CLR;
RW_SET;
EN_CLR;
_nop_();
EN_SET;
return (bit)(DataPort & 0x80);
} */
/*------------------------------------------------
写入命令函数
------------------------------------------------*/
void LCD_Write_Com(unsigned char com)
{
// while(LCD_Check_Busy()); //忙则等待
DelayMs(5);
RS_CLR;
RW_CLR;
EN_SET;
DataPort= com;
_nop_();
EN_CLR;
}
/*------------------------------------------------
写入数据函数
------------------------------------------------*/
void LCD_Write_Data(unsigned char Data)
{
//while(LCD_Check_Busy()); //忙则等待
DelayMs(5);
RS_SET;
RW_CLR;
EN_SET;
DataPort= Data;
_nop_();
EN_CLR;
}
/*------------------------------------------------
清屏函数
------------------------------------------------*/
void LCD_Clear(void)
{
LCD_Write_Com(0x01);
DelayMs(5);
}
/*------------------------------------------------
写入字符串函数
------------------------------------------------*/
void LCD_Write_String(unsigned char x,unsigned char y,unsigned char *s)
{
if (y == 0)
{
LCD_Write_Com(0x80 + x); //表示第一行
}
else
{
LCD_Write_Com(0xC0 + x); //表示第二行
}
while (*s)
{
LCD_Write_Data( *s);
s ++;
}
}
/*------------------------------------------------
写入字符函数
------------------------------------------------*/
void LCD_Write_Char(unsigned char x,unsigned char y,unsigned char Data)
{
if (y == 0)
{
LCD_Write_Com(0x80 + x);
}
else
{
LCD_Write_Com(0xC0 + x);
}
LCD_Write_Data( Data);
}
/*------------------------------------------------
初始化函数
------------------------------------------------*/
void LCD_Init(void)
{
LCD_Write_Com(0x38); /*显示模式设置*/
DelayMs(5);
LCD_Write_Com(0x38);
DelayMs(5);
LCD_Write_Com(0x38);
DelayMs(5);
LCD_Write_Com(0x38);
LCD_Write_Com(0x08); /*显示关闭*/
LCD_Write_Com(0x01); /*显示清屏*/
LCD_Write_Com(0x06); /*显示光标移动设置*/
DelayMs(5);
LCD_Write_Com(0x0C); /*显示开及光标设置*/
}
/*------------------------------------------------
主函数
------------------------------------------------*/
void main(void)
{
unsigned char i,j;
unsigned char *p,*q;
LCD_Init();
while (1)
{
i = 3;
j = 1;
p = "15150664075";//"This New World!";
q = "here is my tel:";//"Welcome to" ;
LCD_Clear();
//LCD_Write_String(2,0,"Welcome to");
while (*q)
{
LCD_Write_Char(j,0,*q);
j ++;
q ++;
DelayMs(250);
}
DelayMs(250);
while (*p)
{
LCD_Write_Char(i,1,*p);
i ++;
p ++;
DelayMs(250);
}
//DelayMs(255);
delay(800);
}
}
名称:LCD1602
论坛:www.doflye.net
编写:shifang
日期:2009.5
修改:无
内容:通过标准程序静态显示字符
引脚定义如下:1-VSS 2-VDD 3-V0 4-RS 5-R/W 6-E 7-14 DB0-DB7 15-BLA 16-BLK
------------------------------------------------*/
#include<reg52.h> //包含头文件,一般情况不需要改动,头文件包含特殊功能寄存器的定义
#include<intrins.h>
sbit RS = P2^4; //定义端口
sbit RW = P2^5;
sbit EN = P2^6;
#define RS_CLR RS=0
#define RS_SET RS=1
#define RW_CLR RW=0
#define RW_SET RW=1
#define EN_CLR EN=0
#define EN_SET EN=1
#define DataPort P0
unsigned char *time = "23-58-49";
/*------------------------------------------------
uS延时函数,含有输入参数 unsigned char t,无返回值
unsigned char 是定义无符号字符变量,其值的范围是
0~255 这里使用晶振12M,精确延时请使用汇编,大致延时
长度如下 T=tx2+5 uS
------------------------------------------------*/
void DelayUs2x(unsigned char t)
{
while(--t);
}
void delay(int n)
{
int i,j;
for(i = 0;i < 255;i++)
for( j = 0; j < n;j++)
{}
}
/*------------------------------------------------
mS延时函数,含有输入参数 unsigned char t,无返回值
unsigned char 是定义无符号字符变量,其值的范围是
0~255 这里使用晶振12M,精确延时请使用汇编
------------------------------------------------*/
void DelayMs(unsigned char t)
{
while(t--)
{
//大致延时1mS
DelayUs2x(245);
DelayUs2x(245);
}
}
/*------------------------------------------------
判忙函数
------------------------------------------------*/
/*bit LCD_Check_Busy(void)
{
DataPort= 0xFF;
RS_CLR;
RW_SET;
EN_CLR;
_nop_();
EN_SET;
return (bit)(DataPort & 0x80);
} */
/*------------------------------------------------
写入命令函数
------------------------------------------------*/
void LCD_Write_Com(unsigned char com)
{
// while(LCD_Check_Busy()); //忙则等待
DelayMs(5);
RS_CLR;
RW_CLR;
EN_SET;
DataPort= com;
_nop_();
EN_CLR;
}
/*------------------------------------------------
写入数据函数
------------------------------------------------*/
void LCD_Write_Data(unsigned char Data)
{
//while(LCD_Check_Busy()); //忙则等待
DelayMs(5);
RS_SET;
RW_CLR;
EN_SET;
DataPort= Data;
_nop_();
EN_CLR;
}
/*------------------------------------------------
清屏函数
------------------------------------------------*/
void LCD_Clear(void)
{
LCD_Write_Com(0x01);
DelayMs(5);
}
/*------------------------------------------------
写入字符串函数
------------------------------------------------*/
void LCD_Write_String(unsigned char x,unsigned char y,unsigned char *s)
{
if (y == 0)
{
LCD_Write_Com(0x80 + x); //表示第一行
}
else
{
LCD_Write_Com(0xC0 + x); //表示第二行
}
while (*s)
{
LCD_Write_Data( *s);
s ++;
}
}
/*------------------------------------------------
写入字符函数
------------------------------------------------*/
void LCD_Write_Char(unsigned char x,unsigned char y,unsigned char Data)
{
if (y == 0)
{
LCD_Write_Com(0x80 + x);
}
else
{
LCD_Write_Com(0xC0 + x);
}
LCD_Write_Data( Data);
}
/*------------------------------------------------
初始化函数
------------------------------------------------*/
void LCD_Init(void)
{
LCD_Write_Com(0x38); /*显示模式设置*/
DelayMs(5);
LCD_Write_Com(0x38);
DelayMs(5);
LCD_Write_Com(0x38);
DelayMs(5);
LCD_Write_Com(0x38);
LCD_Write_Com(0x08); /*显示关闭*/
LCD_Write_Com(0x01); /*显示清屏*/
LCD_Write_Com(0x06); /*显示光标移动设置*/
DelayMs(5);
LCD_Write_Com(0x0C); /*显示开及光标设置*/
}
/*------------------------------------------------
主函数
------------------------------------------------*/
void main(void)
{
unsigned char i,j;
unsigned char *p,*q;
LCD_Init();
while (1)
{
i = 3;
j = 1;
p = "15150664075";//"This New World!";
q = "here is my tel:";//"Welcome to" ;
LCD_Clear();
//LCD_Write_String(2,0,"Welcome to");
while (*q)
{
LCD_Write_Char(j,0,*q);
j ++;
q ++;
DelayMs(250);
}
DelayMs(250);
while (*p)
{
LCD_Write_Char(i,1,*p);
i ++;
p ++;
DelayMs(250);
}
//DelayMs(255);
delay(800);
}
}
0 0
- LCD灯
- LCD背光灯驱动
- LCD
- lcd
- lcd
- lcd
- LCD
- lcd
- LCD
- LCD
- LCD
- lcd
- LCD
- LCD
- LCD
- 红外遥控led灯及LCD屏幕
- LCD和LCD控制器
- LCD和LCD控制器
- requests 库的另类用法(stream)
- Java 开源博客 Solo 1.8.0 发布 - 改进文件上传
- 由于清屏命令,导致调用函数前的语句无法打印
- BZOJ 1057: [ZJOI2007]棋盘制作 单调栈裸题
- 写了一个从oracle导数据到hbase的多线程java程序,只要创建一个实体加上注解基本就可以导数据了
- LCD灯
- [转载]ANSYS12.0安装教程
- 嵌入式 && 桌面类软件引导过程
- 让EFCore更疯狂些的扩展类库(二):查询缓存、分部sql、表名替换、遍历的策略配置
- Java赋值、运算符与类型转换
- windows访问虚拟机里的CentOS7中angular应用
- 泛型
- POJ 3191The Moronic Cowmpouter
- access json.jbuilder file in api