ROS 使用stage进行(LaserScan)激光扫描仿真 51cto
来源:互联网 发布:瑞星防火墙软件 编辑:程序博客网 时间:2024/06/10 11:55
以my_stage为例
创建工程名为my_stage的package。
运行以下命令:
cd ~/catkin_ws/srccatkin_create_pkg my_stage std_msgs roscppstd_msgs roscpp 为依赖包
在my_stage 中的src中新建my_stage.cpp文件
#include<ros/ros.h>#include<sensor_msgs/LaserScan.h>#include<geometry_msgs/Twist.h>class Stopper{public: const static double FORWARD_SPEED_MPS = 0.5; const static double MIN_SCAN_ANGLE_RAD = -30.0/180*M_PI; const static double MAX_SCAN_ANGLE_RAD = +30.0/180*M_PI; const static float MIN_PROXIMITY_RANGE_M = 0.5; Stopper(); void startMoving();private:ros::NodeHandle node;ros::Publisher commandPub;ros::Subscriber laserSub;bool keepMoving;void moveForward();void scanCallback( const sensor_msgs::LaserScan ::ConstPtr& scan);};Stopper::Stopper(){ keepMoving=true; commandPub=node.advertise<geometry_msgs::Twist>("cmd_vel",10); laserSub=node.subscribe("base_scan",1,&Stopper::scanCallback,this);}void Stopper::moveForward(){ geometry_msgs::Twist msg; msg.linear.x=FORWARD_SPEED_MPS; commandPub.publish(msg);}void Stopper::scanCallback(const sensor_msgs::LaserScan::ConstPtr &scan){ int minIndex=ceil(( MIN_SCAN_ANGLE_RAD - scan->angle_min) / scan-> angle_increment); int maxIndex = floor(( MAX_SCAN_ANGLE_RAD - scan->angle_min) / scan-> angle_increment); float closestRange = scan->ranges[minIndex]; for (int currIndex = minIndex + 1; currIndex <= maxIndex; currIndex++) { if (scan->ranges[currIndex] < closestRange) { closestRange = scan->ranges[currIndex]; } } ROS_INFO_STREAM("Closest range: " << closestRange); if (closestRange < MIN_PROXIMITY_RANGE_M) { ROS_INFO("Stop!"); keepMoving = false; }}void Stopper::startMoving(){ros::Rate rate(10);ROS_INFO("start moving");while(ros::ok()&&keepMoving){ moveForward(); ros::spinOnce(); rate.sleep();}}int main(int argc,char **argv){ ros::init(argc,argv,"stopper"); Stopper stopper; stopper.startMoving(); return 0;}
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
修改CMakeLists文件如下
cmake_minimum_required(VERSION 2.8.3)project(my_stage)## Find catkin macros and libraries## if COMPONENTS list like find_package(catkin REQUIRED COMPONENTS xyz)## is used, also find other catkin packagesfind_package(catkin REQUIRED COMPONENTS roscpp std_msgs)## System dependencies are found with CMake's conventions# find_package(Boost REQUIRED COMPONENTS system)## Uncomment this if the package has a setup.py. This macro ensures## modules and global scripts declared therein get installed## See http://ros.org/doc/api/catkin/html/user_guide/setup_dot_py.html# catkin_python_setup()################################################## Declare ROS messages, services and actions #################################################### To declare and build messages, services or actions from within this## package, follow these steps:## * Let MSG_DEP_SET be the set of packages whose message types you use in## your messages/services/actions (e.g. std_msgs, actionlib_msgs, ...).## * In the file package.xml:## * add a build_depend tag for "message_generation"## * add a build_depend and a run_depend tag for each package in MSG_DEP_SET## * If MSG_DEP_SET isn't empty the following dependency has been pulled in## but can be declared for certainty nonetheless:## * add a run_depend tag for "message_runtime"## * In this file (CMakeLists.txt):## * add "message_generation" and every package in MSG_DEP_SET to## find_package(catkin REQUIRED COMPONENTS ...)## * add "message_runtime" and every package in MSG_DEP_SET to## catkin_package(CATKIN_DEPENDS ...)## * uncomment the add_*_files sections below as needed## and list every .msg/.srv/.action file to be processed## * uncomment the generate_messages entry below## * add every package in MSG_DEP_SET to generate_messages(DEPENDENCIES ...)## Generate messages in the 'msg' folder# add_message_files(# FILES# Message1.msg# Message2.msg# )## Generate services in the 'srv' folder# add_service_files(# FILES# Service1.srv# Service2.srv# )## Generate actions in the 'action' folder# add_action_files(# FILES# Action1.action# Action2.action# )## Generate added messages and services with any dependencies listed here# generate_messages(# DEPENDENCIES# std_msgs# )################################################## Declare ROS dynamic reconfigure parameters #################################################### To declare and build dynamic reconfigure parameters within this## package, follow these steps:## * In the file package.xml:## * add a build_depend and a run_depend tag for "dynamic_reconfigure"## * In this file (CMakeLists.txt):## * add "dynamic_reconfigure" to## find_package(catkin REQUIRED COMPONENTS ...)## * uncomment the "generate_dynamic_reconfigure_options" section below## and list every .cfg file to be processed## Generate dynamic reconfigure parameters in the 'cfg' folder# generate_dynamic_reconfigure_options(# cfg/DynReconf1.cfg# cfg/DynReconf2.cfg# )##################################### catkin specific configuration ####################################### The catkin_package macro generates cmake config files for your package## Declare things to be passed to dependent projects## INCLUDE_DIRS: uncomment this if you package contains header files## LIBRARIES: libraries you create in this project that dependent projects also need## CATKIN_DEPENDS: catkin_packages dependent projects also need## DEPENDS: system dependencies of this project that dependent projects also needcatkin_package(# INCLUDE_DIRS include# LIBRARIES my_stage# CATKIN_DEPENDS roscpp std_msgs# DEPENDS system_lib)############# Build ############### Specify additional locations of header files## Your package locations should be listed before other locations# include_directories(include)include_directories( ${catkin_INCLUDE_DIRS})## Declare a C++ library# add_library(my_stage# src/${PROJECT_NAME}/my_stage.cpp# )## Add cmake target dependencies of the library## as an example, code may need to be generated before libraries## either from message generation or dynamic reconfigure# add_dependencies(my_stage ${${PROJECT_NAME}_EXPORTED_TARGETS} ${catkin_EXPORTED_TARGETS})## Declare a C++ executable add_executable(my_stage src/my_stage.cpp)## Add cmake target dependencies of the executable## same as for the library above# add_dependencies(my_stage_node ${${PROJECT_NAME}_EXPORTED_TARGETS} ${catkin_EXPORTED_TARGETS})## Specify libraries to link a library or executable target against target_link_libraries(my_stage ${catkin_LIBRARIES} )############### Install ################ all install targets should use catkin DESTINATION variables# See http://ros.org/doc/api/catkin/html/adv_user_guide/variables.html## Mark executable scripts (Python etc.) for installation## in contrast to setup.py, you can choose the destination# install(PROGRAMS# scripts/my_python_script# DESTINATION ${CATKIN_PACKAGE_BIN_DESTINATION}# )## Mark executables and/or libraries for installation# install(TARGETS my_stage my_stage_node# ARCHIVE DESTINATION ${CATKIN_PACKAGE_LIB_DESTINATION}# LIBRARY DESTINATION ${CATKIN_PACKAGE_LIB_DESTINATION}# RUNTIME DESTINATION ${CATKIN_PACKAGE_BIN_DESTINATION}# )## Mark cpp header files for installation# install(DIRECTORY include/${PROJECT_NAME}/# DESTINATION ${CATKIN_PACKAGE_INCLUDE_DESTINATION}# FILES_MATCHING PATTERN "*.h"# PATTERN ".svn" EXCLUDE# )## Mark other files for installation (e.g. launch and bag files, etc.)# install(FILES# # myfile1# # myfile2# DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION}# )############### Testing ################# Add gtest based cpp test target and link libraries# catkin_add_gtest(${PROJECT_NAME}-test test/test_my_stage.cpp)# if(TARGET ${PROJECT_NAME}-test)# target_link_libraries(${PROJECT_NAME}-test ${PROJECT_NAME})# endif()## Add folders to be run by python nosetests# catkin_add_nosetests(test)
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 139
- 140
- 141
- 142
- 143
- 144
- 145
- 146
- 147
- 148
- 149
- 150
- 151
- 152
- 153
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 166
- 167
- 168
- 169
- 170
- 171
- 172
- 173
- 174
- 175
- 176
- 177
- 178
- 179
- 180
- 181
- 182
- 183
- 184
- 185
- 186
- 187
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 139
- 140
- 141
- 142
- 143
- 144
- 145
- 146
- 147
- 148
- 149
- 150
- 151
- 152
- 153
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 166
- 167
- 168
- 169
- 170
- 171
- 172
- 173
- 174
- 175
- 176
- 177
- 178
- 179
- 180
- 181
- 182
- 183
- 184
- 185
- 186
- 187
package.xml文件
<?xml version="1.0"?><package> <name>my_stage</name> <version>0.0.0</version> <description>The my_stage package</description> <maintainer email="unicorn@todo.todo">unicorn</maintainer> <license>TODO</license> <buildtool_depend>catkin</buildtool_depend> <build_depend>roscpp</build_depend> <build_depend>std_msgs</build_depend> <run_depend>roscpp</run_depend> <run_depend>std_msgs</run_depend> <export> </export></package>
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
新建在my_stage目录下新建launch文件夹,在luanch文件夹下新建my_stage.launch文件
<launch><node name = "stage" pkg="stage_ros" type = "stageros" args="$(find stage_ros)/world/willow-erratic.world"/><node name = "my_stage" pkg = "my_stage" type = "my_stage"output = "screen" /></launch>
运行:
cd ~/catkin_ws catkin_makeroscore roslaunch my_stage my_stage.launch
结果显示:
0 0