POJ 1222 EXTENDED LIGHTS OUT
来源:互联网 发布:英雄连2英军单位数据 编辑:程序博客网 时间:2024/05/16 09:38
异或高斯消元:
每个灯的开和关对周围5个格子产生影响,选择一些灯使所有的灯关闭.
可以构建一个每个灯对周围影响的30×30矩阵,矩阵的值等于原来的状态。
再用高斯消元求解每个灯的状态。
EXTENDED LIGHTS OUT
Time Limit: 1000MS Memory Limit: 10000KTotal Submissions: 6442 Accepted: 4228
Description
In an extended version of the game Lights Out, is a puzzle with 5 rows of 6 buttons each (the actual puzzle has 5 rows of 5 buttons each). Each button has a light. When a button is pressed, that button and each of its (up to four) neighbors above, below, right and left, has the state of its light reversed. (If on, the light is turned off; if off, the light is turned on.) Buttons in the corners change the state of 3 buttons; buttons on an edge change the state of 4 buttons and other buttons change the state of 5. For example, if the buttons marked X on the left below were to be pressed,the display would change to the image on the right.
The aim of the game is, starting from any initial set of lights on in the display, to press buttons to get the display to a state where all lights are off. When adjacent buttons are pressed, the action of one button can undo the effect of another. For instance, in the display below, pressing buttons marked X in the left display results in the right display.Note that the buttons in row 2 column 3 and row 2 column 5 both change the state of the button in row 2 column 4,so that, in the end, its state is unchanged.
Note:
1. It does not matter what order the buttons are pressed.
2. If a button is pressed a second time, it exactly cancels the effect of the first press, so no button ever need be pressed more than once.
3. As illustrated in the second diagram, all the lights in the first row may be turned off, by pressing the corresponding buttons in the second row. By repeating this process in each row, all the lights in the first
four rows may be turned out. Similarly, by pressing buttons in columns 2, 3 ?, all lights in the first 5 columns may be turned off.
Write a program to solve the puzzle.
The aim of the game is, starting from any initial set of lights on in the display, to press buttons to get the display to a state where all lights are off. When adjacent buttons are pressed, the action of one button can undo the effect of another. For instance, in the display below, pressing buttons marked X in the left display results in the right display.Note that the buttons in row 2 column 3 and row 2 column 5 both change the state of the button in row 2 column 4,so that, in the end, its state is unchanged.
Note:
1. It does not matter what order the buttons are pressed.
2. If a button is pressed a second time, it exactly cancels the effect of the first press, so no button ever need be pressed more than once.
3. As illustrated in the second diagram, all the lights in the first row may be turned off, by pressing the corresponding buttons in the second row. By repeating this process in each row, all the lights in the first
four rows may be turned out. Similarly, by pressing buttons in columns 2, 3 ?, all lights in the first 5 columns may be turned off.
Write a program to solve the puzzle.
Input
The first line of the input is a positive integer n which is the number of puzzles that follow. Each puzzle will be five lines, each of which has six 0 or 1 separated by one or more spaces. A 0 indicates that the light is off, while a 1 indicates that the light is on initially.
Output
For each puzzle, the output consists of a line with the string: "PUZZLE #m", where m is the index of the puzzle in the input file. Following that line, is a puzzle-like display (in the same format as the input) . In this case, 1's indicate buttons that must be pressed to solve the puzzle, while 0 indicate buttons, which are not pressed. There should be exactly one space between each 0 or 1 in the output puzzle-like display.
Sample Input
20 1 1 0 1 01 0 0 1 1 10 0 1 0 0 11 0 0 1 0 10 1 1 1 0 00 0 1 0 1 01 0 1 0 1 10 0 1 0 1 11 0 1 1 0 00 1 0 1 0 0
Sample Output
PUZZLE #11 0 1 0 0 11 1 0 1 0 10 0 1 0 1 11 0 0 1 0 00 1 0 0 0 0PUZZLE #21 0 0 1 1 11 1 0 0 0 00 0 0 1 0 01 1 0 1 0 11 0 1 1 0 1
Source
Greater New York 2002
[Submit] [Go Back] [Status] [Discuss]
#include <iostream>#include <cstdio>#include <cstring>#include <algorithm>using namespace std;int a[40][40],ans[40];void Gauss(){ for(int k=0;k<30;k++) { int mx=k; for(int i=k+1;i<30;i++) if(a[i][k]>a[mx][k]) mx=i; if(mx) { for(int i=0;i<=30;i++) swap(a[mx][i],a[k][i]); } for(int i=0;i<30;i++) { if(i==k) continue; if(a[i][k]) { for(int j=k;j<=30;j++) { a[i][j]^=a[k][j]; } } } } for(int i=0;i<30;i++) ans[i]=a[i][30];}int main(){ int T_T,cas=1; scanf("%d",&T_T); while(T_T--) { memset(a,0,sizeof(a)); memset(ans,0,sizeof(ans)); for(int i=0;i<5;i++) { for(int j=0;j<6;j++) { scanf("%d",&a[j+i*6][30]); a[j+i*6][j+i*6]=1; if(i-1>=0) a[j+i*6][j+6*(i-1)]=1; if(i+1<5) a[j+i*6][j+6*(i+1)]=1; if(j-1>=0) a[j+i*6][j-1+i*6]=1; if(j+1<6) a[j+i*6][j+1+i*6]=1; } } Gauss(); printf("PUZZLE #%d\n",cas++); for(int i=0;i<30;i++) { if(i%6) putchar(32); printf("%d",ans[i]); if((i+1)%6==0) putchar(10); } } return 0;}
1 4
- poj 1222 EXTENDED LIGHTS OUT
- POJ 1222 EXTENDED LIGHTS OUT
- POJ 1222 : EXTENDED LIGHTS OUT
- POJ 1222 EXTENDED LIGHTS OUT
- POJ 1222 EXTENDED LIGHTS OUT
- POJ 1222 EXTENDED LIGHTS OUT
- poj 1222:EXTENDED LIGHTS OUT
- POJ 1222 EXTENDED LIGHTS OUT
- POJ 1222 EXTENDED LIGHTS OUT
- poj 1222EXTENDED LIGHTS OUT
- POJ 1222 EXTENDED LIGHTS OUT
- POJ 1222 EXTENDED LIGHTS OUT
- [POJ 1222] EXTENDED LIGHTS OUT
- 【POJ 1222】EXTENDED LIGHTS OUT
- POJ 1222 EXTENDED LIGHTS OUT
- poj-1222 EXTENDED LIGHTS OUT
- poj 1222 EXTENDED LIGHTS OUT
- POJ 1222 EXTENDED LIGHTS OUT
- 足球与oracle系列(4):从巴西惨败于德国,想到,差异的RAC拓扑对比!
- NPAPI插件开发学习:NPAPI的介绍
- The Kernel Newbie Corner: Kernel Symbols: What's Available to Your Module, What Isn't
- 谁有Chart FX for .NET 6.2 For VS2003的破解,给我一份.【紧急】
- PostgreSQL备份与恢复示例
- POJ 1222 EXTENDED LIGHTS OUT
- OpenSessionInViewFilter 的配置及替代方案
- first day for new job
- NPAPI插件开发学习:Webkit的插件机制
- RabbitMQ (二)工作队列
- 如何:测试 UserControl 的运行时行为
- 自定义对象的归档 //类只有实现 NSCoding 协议才具备归档功能 归档最好定义成宏,笔误好发现.
- JAVA中的四种引用
- 3.14 Simplify Path