大数据应用
来源：互联网 发布：本地文件同步软件 编辑：程序博客网 时间：2024/05/21 10:38
15:50 2016/8/4 summary
1.环境
1.1.服务端
1.1.1.宿主环境
1.1.1.1.处理器/4核/8线程(X64 i7-4790K 4.00GHz) 8G内存 256G固态硬盘/2T机械硬盘 (有的主板需要打开Intel VT(虚拟技术))
1.1.1.2.操作系统64位Windows 7 旗舰版 Service Pack 1
1.1.1.3.无任务剩余资源:100%CPU 6G内存 90G固态硬盘
1.1.2.虚拟硬件(安装VMware-workstation-full-10.0.2-1744117.1398244508)
1.1.2.1.新建虚拟机
1.1.2.2.自定义(高级)
1.1.2.3.Workstation 10.0
1.1.2.4.安装程序光盘映像(iso)(选择CentOS-6.5-x86_64-bin-DVD1.iso所在路径)
1.1.2.5.全名(node1)及用户名密码
1.1.2.6.虚拟机名称和位置
1.1.2.7.处理器数量选择1,核心数量2
1.1.2.8.内存3g
1.1.2.9.网络连接:使用桥接网络
1.1.2.10.SCSI控制器默认
1.1.2.11.虚拟硬盘类型默认
1.1.2.12.创建新虚拟硬盘
1.1.2.13.最大磁盘大小30G,其它默认
1.1.2.14.硬盘文件,默认
1.1.2.15.完成
1.1.3.操作系统(CentOS-6.5-x86_64-bin-DVD1.iso)
1.1.3.1.开启虚拟机等待安装结束,自已重启,并进入登陆界面
1.1.3.2.ctrl+alt+f1进入桌面(如果当前是终端界面),使用帐号登陆,设置网络(如校园网登陆),保证可使用互联网
1.1.3.3.ctrl+alt+f2进入终端登陆界面,使用root登陆,查看ip地址,退出
1.1.3.4.使用putty管理该结点,putty_V0.63.0.0.43510830.exe -v -ssh -pw password -P 22 root@node1OrIp
1.1.3.5.修改网卡ip地址获取为dhcp(若虚拟机创建时即为桥接模式,则已设为dhcp),使用如下第一行命令编辑,并将相应名值对修改如下第二行.操作命令见界面下提示(^x 表示ctrl+x 退出 ^o保存)
nano /etc/sysconfig/network-scripts/ifcfg-eth0
BOOTPROTO="dhcp"
1.1.3.6.关闭selinux,为影响smb使用
nano /etc/selinux/config
SELINUX=disabled
1.1.3.7.联网条件下安装smb server与client
#不同牌的centos可能不一样(可能安装名是smb,而不是samba)
yum -y install samba
mv /etc/samba/smb.conf /etc/samba/smb.conf_bak
#新建该文件并写入(注意每行前没有空格)
nano /etc/samba/smb.conf
[global]
workgroup = WORKGROUP
server string = hi
netbios name = hi
security = user
[hi]
comment = hi
path = /
public = no
writable = yes
guest = no
browseable = yes
valid users = root,hds
#admin users = hds
create mask = 0765
#开机启动smb
chkconfig smb on
#或者使用以下方式开机启动
nano /etc/rc.d/rc.local
service smb start
1.1.3.8.修改主机名
nano /etc/sysconfig/network
HOSTNAME=node1
1.1.3.9.添加hadoop用户及组,设置访问密码
groupadd hadoop
useradd -s /bin/bash -d /home/hds -m hds -g hadoop
passwd hds
smbpasswd -a hds
smbpasswd -a root
1.1.3.10.共享文件存储空间
#先在开发机windows上面共享一个具有读写权的文件夹
#root下操作
mkdir /home/hds/center
chown -R hds /home/hds/center
chgrp -R hadoop /home/hds/center
#开机挂载
nano /etc/rc.d/rc.local
mount -t cifs -o username=administrator,passwd=password,rw,dir_mode=0777,file_mode=0777 //centerIp/center /home/hds/center
#或使用fstab开挂载
nano /etc/fstab
//centerIp/center /home/hds/center cifs username=administrator,passwd=password,rw,dir_mode=0777,file_mode=0777 0 2
df
1.1.3.11.免密访问
#root登陆
ssh-keygen -t dsa -P '' -f ~/.ssh/id_dsa
mv ~/.ssh/id_dsa.pub ~/.ssh/authorized_keys
#hds登陆
su hds
ssh-keygen -t dsa -P '' -f ~/.ssh/id_dsa
mv ~/.ssh/id_dsa.pub ~/.ssh/authorized_keys
1.1.3.12 修改防火墙
#关掉(避免复杂的iptables设置)
chkconfig iptables off
#或者设置(需要很明确打开哪些端口,hadoop及spark会启动很多端口)
iptables -I INPUT -p tcp --dport 80 -j ACCEPT
iptables -I INPUT -p tcp --dport 8080 -j ACCEPT
iptables -I INPUT -p tcp --dport 8088 -j ACCEPT
iptables -I INPUT -p tcp --dport 4040 -j ACCEPT
iptables -I INPUT -p tcp --dport 443 -j ACCEPT
iptables -I INPUT -p tcp --dport 53 -j ACCEPT
iptables -I INPUT -p tcp --dport 139 -j ACCEPT
iptables -I INPUT -p tcp --dport 445 -j ACCEPT
/etc/rc.d/init.d/iptables save
service iptables restart
chkconfig iptables on
iptables -L -x -v -n
1.1.3.13.reboot
1.1.3.14.验证之前的设置上否正确,此时系统内存占用不到300m,磁盘不到3G
1.1.3.15.关机,虚拟机完整clone,按需要clone需要的数量,本环境下还可clone一台
1.1.3.16.修改hosts及hostname取得各结点ip地址,并为其命名,并保存在\\centerIP\center\nodes.txt
172.16.2.106 node1
172.16.2.57 node2
cat /home/hds/center/nodes.txt >> /etc/hosts
scp -r /etc/hosts root@node2:/etc/hosts
#手动(也可以写shell)修改各结点主机名
ssh node2
hostname node2
nano /etc/sysconfig/network
HOSTNAME=node2
1.1.3.17.使用ssh在各个结点登陆一次,既验证,也是为发初始回答yes
#root登陆
ssh node2
ssh node1
#hds登陆
ssh node2
ssh node1
1.1.4.JAVA/HADOOP(hdfs/yarn)
1.1.4.1.以任何方式下载以下文件,放入\\centerIP\center\目录下
jdk-8u73-linux-x64.tar.gz
hadoop-2.6.4.tar.gz
1.1.4.2.以hds(以下默认以hds用户操作)在各结点登陆解压至其home
tar zxvf ~/center/jdk-8u73-linux-x64.tar.gz
tar zxvf ~/center/hadoop-2.6.4.tar.gz
1.1.4.3.在每个结点创建以下目录
mkdir /tmp/tmp
mkdir ~/namenodeNameDir
mkdir ~/datanodeDataDir
1.1.4.4.配置hadoop
#复制~/hadoop-2.6.4/etc/hadoop 为~/center/conf
mkdir ~/center/logs
mkdir ~/center/conf
cp -R ~/hadoop-2.6.4/etc/hadoop/* ~/center/conf/
nano ~/center/conf/core-site.xml
<configuration>
<property><name>fs.defaultFS</name><value>hdfs://node1:9000</value></property>
<property><name>hadoop.tmp.dir</name><value>file:/tmp/tmp</value><description>tmp</description></property>
<property><name>io.file.buffer.size</name><value>131072</value></property>
</configuration>
#xml配置中的路径需要完整,不能是如 file:~/namenodeNameDir
nano ~/center/conf/hdfs-site.xml
<configuration>
<property><name>dfs.namenode.name.dir</name><value>file:/home/hds/namenodeNameDir</value></property>
<property><name>dfs.datanode.data.dir</name><value>file:/home/hds/datanodeDataDir</value></property>
<property><name>dfs.replication</name><value>2</value></property>
<property><name>dfs.webhdfs.enabled</name><value>true</value></property>
</configuration>
#让每个yarn计算结点管理2G(1G留给系统)内存,2*6=12G虚存,两个核,每次申请最多只允许申请2g内存
nano ~/center/conf/yarn-site.xml
<configuration>
<property><name>yarn.resourcemanager.address</name><value>node1:8032</value></property>
<property><name>yarn.resourcemanager.scheduler.address</name><value>node1:8030</value></property>
<property><name>yarn.resourcemanager.resource-tracker.address</name><value>node1:8035</value></property>
<property><name>yarn.resourcemanager.admin.address</name><value>node1:8033</value></property>
<property><name>yarn.resourcemanager.webapp.address</name><value>node1:8088</value></property>
<property><name>yarn.nodemanager.aux-services</name><value>mapreduce_shuffle</value></property>
<property><name>yarn.nodemanager.aux-services.mapreduce.shuffle.class</name><value>org.apache.hadoop.mapred.ShuffleHandler</value></property>
<property><name>yarn.nodemanager.resource.memory-mb</name><value>2048</value></property>
<property><name>yarn.nodemanager.vmem-pmem-ratio</name><value>6</value></property>
<property><name>yarn.nodemanager.pmem-check-enabled</name><value>true</value></property>
<property><name>yarn.nodemanager.vmem-check-enabled</name><value>true</value></property>
<property><name>yarn.scheduler.minimum-allocation-mb</name><value>16</value></property>
<property><name>yarn.scheduler.maximum-allocation-mb</name><value>2048</value></property>
<property><name>yarn.nodemanager.resource.cpu-vcores</name><value>2</value></property>
<property><name>yarn.scheduler.minimum-allocation-vcores</name><value>1</value></property>
<property><name>yarn.scheduler.maximum-allocation-vcores</name><value>2</value></property>
</configuration>
nano ~/center/conf/slaves
node1
node2
1.1.4.5.修改 .bashrc,文件尾部添加
nano ~/.bashrc
export JAVA_HOME=~/jdk1.8.0_73
export HADOOP_HOME=~/hadoop-2.6.4
export CLASSPATH=.:$JAVA_HOME/jre/lib:$JAVA_HOME/lib:$JAVA_HOME/lib/tools.jar
export PATH=$PATH:$JAVA_HOME/bin:$HADOOP_HOME/bin
export HADOOP_CONF_DIR=~/center/conf
export HADOOP_LOG_DIR=~/center/logs
scp ~/.bashrc hds@node2:~/.bashrc
1.1.4.6.初始化
~/hadoop-2.6.4/bin/hdfs namenode -format
1.1.4.7.启动
~/hadoop-2.6.4/sbin/stop-yarn.sh
~/hadoop-2.6.4/sbin/stop-dfs.sh
~/hadoop-2.6.4/sbin/start-dfs.sh
~/hadoop-2.6.4/sbin/start-yarn.sh
1.1.4.8.验证
#主结点包含 hdfs的主结点NameNode和SecondNameNode Yarn的主结点ResourceManager
#从结点包含 hdfs的从结点DataNode yarn的从结点NodeManager
#node1既是主结点也是从结点,node2仅是从结点
jps
3712 DataNode
4403 Jps
4102 NodeManager
4007 ResourceManager
3865 SecondaryNameNode
3594 NameNode
ssh node2
jps
2482 NodeManager
2379 DataNode
2639 Jps
#分别为hdfs/yarn集群
http://node1:50070
http://node1:8088/cluster/nodes
1.1.4.9.资源剩余: 内存2.2G 磁盘22G
free -m
df -m
1.2.客户端
1.2.1.硬件:1处理器/4核(AMD A8-5600K) 4G内存 1T机械硬盘
1.2.2.OS: windows7 旗舰版 Service Pack1
1.2.3.对于以下软件,进行下载,安装或解压至某个目录,其中hadoop-eclipse-plugin-2.2.0.jar插件直接丢进eclipseHome/plugins/目录下.scala暂时示使用
jdk-8-windows-x64.zip
apache-maven-3.3.9-bin.zip
eclipse-jee-mars-1-win32-x86_64.zip
hadoop-2.6.4.tar.gz
scala-2.11.6.tgz
spark-2.0.0-bin-hadoop2.6.tgz
hadoop-eclipse-plugin-2.2.0.jar
1.2.4.环境变量与命令接口(%yang%为软件所在目录,%center%为上述共享目录,该版本eclips自带maven,但没有独立版的速度快和灵活)
#创建 hds.bat
set yang=......
set center=......
set java_home=%yang%\jdk1.8.0_60
set maven_home=%yang%\apache-maven-3.3.9
set ECLIPSE_HOME=%yang%\eclipse
set HADOOP_HOME=%yang%\hadoop-2.6.4
set HADOOP_CONF_DIR=%center%\conf
set HADOOP_USER_NAME=hds
set SCALA_HOME=%yang%\scala-2.11.6
set SPARK_HOME=%yang%\spark-2.0.0-bin-hadoop2.6
set classpath=.;%java_home%\lib
set path=.;%HADOOP_HOME%\bin;%java_home%\bin;%JAVA_HOME%\jre\bin\client\;%maven_home%\bin;%path%
start cmd /k "doskey eclipse=start %ECLIPSE_HOME%\eclipse.exe"
1.2.5.eclipse
1.2.5.1.上一步打开的命令行中输入 eclipse 回车,即可运行eclipse,选择定workspace后,按需要设置maven等
1.2.5.2.新建工程->Maven Project->Create a simple project(打勾)->填写 Groud Id(如Learning)和Atfifact Id(如Spark),其它默认->finish
1.2.5.3.修改pom.xml文件内容为:
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>Learning</groupId>
<artifactId>Spark</artifactId>
<version>0.0.1-SNAPSHOT</version>
<packaging>jar</packaging>
<properties>
<project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
</properties>
<dependencies>
<dependency>
<groupId>org.apache.hadoop</groupId>
<artifactId>hadoop-client</artifactId>
<version>2.6.4</version>
</dependency>
<dependency>
<groupId>mysql</groupId>
<artifactId>mysql-connector-java</artifactId>
<version>5.1.18</version>
</dependency>
<dependency>
<groupId>org.apache.spark</groupId>
<artifactId>spark-mllib_2.10</artifactId>
<version>2.0.0</version>
</dependency>
</dependencies>
<build>
<plugins>
<plugin>
<artifactId>maven-compiler-plugin</artifactId>
<version>3.3</version>
<configuration>
<source>1.8</source>
<target>1.8</target>
</configuration>
</plugin>
<plugin>
<artifactId>maven-assembly-plugin</artifactId>
<configuration>
<archive>
<manifest>
<mainClass>org.shirdrn.spark.job.UserAgentStats</mainClass>
</manifest>
</archive>
<descriptorRefs>
<descriptorRef>jar-with-dependencies</descriptorRef>
</descriptorRefs>
<excludes>
<exclude>*.properties</exclude>
<exclude>*.xml</exclude>
</excludes>
</configuration>
<executions>
<execution>
<id>make-assembly</id>
<phase>package</phase>
<goals>
<goal>single</goal>
</goals>
</execution>
</executions>
</plugin>
</plugins>
</build>
</project>
1.2.5.4.alt+f5 选择此项目点OK以更新maven项目(更新完后,会提示错,其实不影响,可从Problems视图里删掉这些错误提示)
1.2.5.5.复制%spark_home%\examples\src进工程根目录,覆盖原目录,然后在eclipse选择工程按f5刷新,删除除了org.apache.spark.examples外的其它包,将以该包的JavaSparkPi为例运行
1.3.5.6.新建main程序,用以编写JavaSparkPi的launcher.
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import org.apache.spark.launcher.SparkLauncher;
public class PiLauncher {
static class InputStreamReaderRunnable implements Runnable {
private BufferedReader reader;
private String name;
public InputStreamReaderRunnable(InputStream is, String name) {
this.reader = new BufferedReader(new InputStreamReader(is));
this.name = name;
}
public void run() {
System.out.println("InputStream " + name + ":");
try {
String line = reader.readLine();
while (line != null) {
System.out.println(line);
line = reader.readLine();
}
reader.close();
} catch (IOException e) {
e.printStackTrace();
}
}
}
public static void main(String[] args) throws Exception {
SparkLauncher spark1 = new SparkLauncher()
.setMainClass("org.apache.spark.examples.JavaSparkPi")
.addAppArgs("100")
.setConf("spark.executor.instances", "3")
.setConf(SparkLauncher.DRIVER_MEMORY, "512m")
.setConf("spark.yarn.am.memory", "512m")
.setConf(SparkLauncher.EXECUTOR_MEMORY, "512m")
.setConf(SparkLauncher.EXECUTOR_CORES, "1")
//YARN cluster mode
.setMaster("yarn").setDeployMode("client").setAppResource("target/Spark-0.0.1-SNAPSHOT-jar-with-dependencies.jar").setConf("spark.sql.warehouse.dir", "file:///C:/Users/Administrator/AppData/Local/Temp/warehouse")
.setVerbose(true);
Process spark = spark1.launch();
InputStreamReaderRunnable inputStreamReaderRunnable = new InputStreamReaderRunnable(spark.getInputStream(),"input");
Thread inputThread = new Thread(inputStreamReaderRunnable, "LogStreamReader input");
inputThread.start();
InputStreamReaderRunnable errorStreamReaderRunnable = new InputStreamReaderRunnable(spark.getErrorStream(),"error");
Thread errorThread = new Thread(errorStreamReaderRunnable, "LogStreamReader error");
errorThread.start();
System.out.println("Waiting for finish...");
int exitCode = spark.waitFor();
System.out.println("Finished! Exit code:" + exitCode);
}
}
1.3.5.7.run as maven build...->goals写package->run以打包,下载依赖需要很长时间,有时还会卡死,需要重新执行.
1.3.5.8.选择上面的launcher以java application运行.打印的日志包含:
......
16/08/06 11:39:01 INFO cluster.YarnScheduler: Removed TaskSet 0.0, whose tasks have all completed, from pool
Pi is roughly 3.1419064
16/08/06 11:39:01 INFO scheduler.DAGScheduler: Job 0 finished: reduce at JavaSparkPi.java:59, took 72.764996 s
......
2.应用(注意资源的供给,当单次任务需求过多资源时,应手动分成多次执行任务,否则会OOM)
18:58 2016/8/6 电气隐患的数据挖掘
1.理解数据
1.1.N个配电柜,每个8组数据,每组数据(x,y)分别为时刻和该时刻传感器采集感知的值.
1.2.每个配电柜可能正常也可能隐患,目的是找出各配电柜模式,再分析哪些是隐患模式,哪些是正常模式,或者说各模式分别属于哪个隐患类别.
1.3.需要从每个配电柜的包含8个函数的数据文件中计算出一个对象用以代表此配电柜.如8个量的最大最小平均值组成的8*3=24维向量.
1.4.人可以分析出其中的规律,但数据量太多,需要交由机器处理,人只需要告诉机器自己是怎么处理的.
1.5.可以一点一点地比较,先比较各量平均值差异,再比较最大最小及其组合等,直到各模式显著不同.
1.6.不一定非要用spark api,用一切可以使用的api,只要达到了目的,尽管方法可能只是小数据才适用
2.上网查已有研究
2.1.配电柜隐患 低压(200v-400v)配电柜 配电网时空故障信息/故障诊断 温度/老化检测(不要太潮湿，常检查有无绝缘老化现象) 振动(曾有过所钢窗的塑料皮（带金属）刮倒变压器上造成短路)
3.实践
3.1.取得所有配电柜的文件名,文件名是配电柜的id
cd /d C:\Users\Administrator\Desktop\electronic
dir /b > id.csv
3.2.id.csv + data.csv = table.DistrubutionBox
3.3.将合并的表存入文件比存入mysql快很多.存文件时不能以文本存,因为表有多于一列的数据
3.4. text < csv < json < parque < mysql < hive
解释:
文件格式的数据类型强度. 意识到这点,才想起.csv是文本格式的,想要用比如数值最好用 mysql,但mysql太慢,hive暂时还未学习,使用parpue应该是不错的选择.这里暂时选择csv,代码手动指定其schema
3.5.逻辑处理流程(向量组DAG):
file -> (fileName(id),file) -> (id, label, sensorname, data, time) -> (id, label, sensorname, max(data), min(data), avg(data) -> (id, max_s0, min_s0, avg_s0, max_s1 ... max_s7, min_s7, avg_s7) -> (id, vector) (聚类得:)f:vector->clusterId (id, vector) -> (id,clusterId) (id,clusterId) join (id,label) by id -> (id,label,clusterId) -> f:cluster->label (id,label,clusterId)->(id,knownLabel,prediectedLabel)
解释:
(在这里以向量组来表示问题,一个向量组同时也是向量集合Collection<Vector>,也是一张数据库表.)
(这是一个抽象概念. 当看到spark的DAG时很亲切,一直想找个可以用DAG表示处理流程的工具,本想着有时间自己去实现一个,我称之为发展DAG.其实这种概念在不少软件里都有,但一来不太了解,二来可能用起来会发现跟我想要的不一样)
(RDD DAG与这里的向量组DAG相比,这里的向量组DAG可能会更加抽象?)
file 原始数据是一组文件,部分是有label的(仅5个),部分是无label的(159个)
(fileName(id), file) file隐含了这样的向量,一个fileName唯一对应一个配电柜,以其作为id,一个配电柜也唯一对应一组数据
(id,label,sensorname,data,time) 将(fileName(id), file)中的file数据取出,与id笛卡尔乘,同时fileName中包含label数据,如果文件名是 ^\d+-\d+\.csv格式,则后一个\d+是label,否则认为分类未知而为0
(id, label, sensorname, max(data), min(data), avg(data) 对上表或向量组,执行sql:select id, sensorname, label, count(data), max(data), min(data), avg(data) from DistributionBox group by id, sensorname, label
(id, max_s0, min_s0, avg_s0, max_s1 ... max_s7, min_s7, avg_s7) 对一表reduceByKey(id),把每个id对应的配电柜数据转换成一个向量,这个转换过程很重要,此方法的好坏决定后续分类预测结果的好坏.
(id, vector) 上表,虽本是向量组,但为了方便使用,而把后面的24维作为一个vector,在与id一些作为一个向量.
(聚类得:)f:vector->clusterId 取上表中的vector作为K-MEANS聚类的输入,并指定4个cluster,结果得出了此函数.
(id, vector) -> (id,clusterId) 利用上述函数,得(id, clusterId),即得出每个配电柜所属的cluster,也是其所属的模式.
(id,clusterId) join (id,label) by id -> (id,label,clusterId) 表连接
f:cluster->label 通过上表得函数
(id,label,clusterId)->(id,knownLabel,prediectedLabel) 使用上函数,得最终结果
4.改进
4.1.采集尽可能多的数据,有些量一旦偏离正常值则有问题,有些组合量偏离正常空间则有问题
5.结果
每次运行的结果会不一样,有一次,它把2和4当作同一类了.
以下这次结果显示:有分类的都与原来预测的一样(最后5行),从来有理由相信,未知分类的预测也是较可信的.
+---------+------------+----------------+
| id | knownLabel | predictedLabel |
+---------+------------+----------------+
| 146.csv | 0 | 3 |
| 45.csv | 0 | 2 |
| 53.csv | 0 | 3 |
| 145.csv | 0 | 2 |
| 91.csv | 0 | 4 |
| 110.csv | 0 | 4 |
| 114.csv | 0 | 2 |
| 94.csv | 0 | 4 |
| 13.csv | 0 | 4 |
| 44.csv | 0 | 3 |
| 127.csv | 0 | 2 |
| 9.csv | 0 | 2 |
| 29.csv | 0 | 4 |
| 92.csv | 0 | 4 |
| 117.csv | 0 | 4 |
| 96.csv | 0 | 2 |
| 24.csv | 0 | 2 |
| 111.csv | 0 | 2 |
| 82.csv | 0 | 4 |
| 34.csv | 0 | 4 |
| 122.csv | 0 | 4 |
| 134.csv | 0 | 4 |
| 78.csv | 0 | 4 |
| 30.csv | 0 | 2 |
| 147.csv | 0 | 2 |
| 81.csv | 0 | 2 |
| 109.csv | 0 | 4 |
| 106.csv | 0 | 3 |
| 61.csv | 0 | 1 |
| 83.csv | 0 | 2 |
| 79.csv | 0 | 2 |
| 132.csv | 0 | 2 |
| 26.csv | 0 | 2 |
| 20.csv | 0 | 2 |
| 38.csv | 0 | 2 |
| 150.csv | 0 | 2 |
| 86.csv | 0 | 2 |
| 103.csv | 0 | 1 |
| 87.csv | 0 | 4 |
| 52.csv | 0 | 3 |
| 116.csv | 0 | 1 |
| 107.csv | 0 | 3 |
| 67.csv | 0 | 4 |
| 15.csv | 0 | 2 |
| 97.csv | 0 | 1 |
| 27.csv | 0 | 3 |
| 48.csv | 0 | 3 |
| 5.csv | 0 | 3 |
| 159.csv | 0 | 4 |
| 113.csv | 0 | 2 |
| 12.csv | 0 | 2 |
| 144.csv | 0 | 2 |
| 131.csv | 0 | 2 |
| 22.csv | 0 | 3 |
| 139.csv | 0 | 2 |
| 115.csv | 0 | 3 |
| 112.csv | 0 | 4 |
| 135.csv | 0 | 3 |
| 47.csv | 0 | 3 |
| 18.csv | 0 | 2 |
| 90.csv | 0 | 4 |
| 152.csv | 0 | 3 |
| 1.csv | 0 | 2 |
| 125.csv | 0 | 4 |
| 37.csv | 0 | 2 |
| 40.csv | 0 | 4 |
| 28.csv | 0 | 2 |
| 136.csv | 0 | 4 |
| 100.csv | 0 | 4 |
| 138.csv | 0 | 1 |
| 11.csv | 0 | 2 |
| 33.csv | 0 | 4 |
| 16.csv | 0 | 3 |
| 141.csv | 0 | 2 |
| 148.csv | 0 | 4 |
| 25.csv | 0 | 2 |
| 21.csv | 0 | 2 |
| 140.csv | 0 | 2 |
| 155.csv | 0 | 2 |
| 85.csv | 0 | 3 |
| 39.csv | 0 | 4 |
| 54.csv | 0 | 3 |
| 41.csv | 0 | 2 |
| 23.csv | 0 | 2 |
| 19.csv | 0 | 2 |
| 35.csv | 0 | 3 |
| 31.csv | 0 | 2 |
| 130.csv | 0 | 2 |
| 69.csv | 0 | 3 |
| 80.csv | 0 | 2 |
| 137.csv | 0 | 2 |
| 72.csv | 0 | 4 |
| 153.csv | 0 | 2 |
| 119.csv | 0 | 3 |
| 105.csv | 0 | 3 |
| 51.csv | 0 | 1 |
| 98.csv | 0 | 4 |
| 57.csv | 0 | 2 |
| 6.csv | 0 | 2 |
| 101.csv | 0 | 2 |
| 14.csv | 0 | 2 |
| 129.csv | 0 | 4 |
| 143.csv | 0 | 2 |
| 88.csv | 0 | 2 |
| 154.csv | 0 | 2 |
| 89.csv | 0 | 2 |
| 121.csv | 0 | 3 |
| 124.csv | 0 | 4 |
| 59.csv | 0 | 2 |
| 77.csv | 0 | 2 |
| 42.csv | 0 | 2 |
| 32.csv | 0 | 4 |
| 62.csv | 0 | 2 |
| 76.csv | 0 | 2 |
| 74.csv | 0 | 3 |
| 63.csv | 0 | 4 |
| 126.csv | 0 | 2 |
| 95.csv | 0 | 3 |
| 8.csv | 0 | 2 |
| 17.csv | 0 | 2 |
| 56.csv | 0 | 2 |
| 3.csv | 0 | 4 |
| 133.csv | 0 | 4 |
| 4.csv | 0 | 4 |
| 49.csv | 0 | 2 |
| 73.csv | 0 | 2 |
| 84.csv | 0 | 2 |
| 158.csv | 0 | 4 |
| 93.csv | 0 | 2 |
| 58.csv | 0 | 4 |
| 128.csv | 0 | 2 |
| 64.csv | 0 | 4 |
| 118.csv | 0 | 1 |
| 157.csv | 0 | 2 |
| 65.csv | 0 | 2 |
| 2.csv | 0 | 2 |
| 151.csv | 0 | 2 |
| 46.csv | 0 | 4 |
| 102.csv | 0 | 4 |
| 66.csv | 0 | 4 |
| 71.csv | 0 | 3 |
| 10.csv | 0 | 2 |
| 68.csv | 0 | 2 |
| 43.csv | 0 | 1 |
| 7.csv | 0 | 3 |
| 75.csv | 0 | 3 |
| 120.csv | 0 | 3 |
| 149.csv | 0 | 3 |
| 99.csv | 0 | 2 |
| 104.csv | 0 | 2 |
| 156.csv | 0 | 2 |
| 60.csv | 0 | 3 |
| 50.csv | 0 | 2 |
| 108.csv | 0 | 2 |
| 142.csv | 0 | 2 |
| 123.csv | 0 | 2 |
| 36.csv | 0 | 2 |
| 55.csv | 0 | 2 |
| 70.csv | 0 | 4 |
| 1-1.csv | 1 | 1 |
| 3-1.csv | 1 | 1 |
| 2-2.csv | 2 | 2 |
| 5-3.csv | 3 | 3 |
| 4-4.csv | 4 | 4 |
+---------+------------+----------------+
6.代码
public static void electricity(String[] args) throws InterruptedException {
SparkSession ss = SparkSession.builder().appName("electronic").getOrCreate();
/* 一个.csv是一个配电柜,也是一个对象,其包含(文件名id,标签,数据) */
String dir = "file:///C:/Users/Administrator/Desktop/electronic";
List<String> ids = ss.read().format("csv")
.option("path", dir + "/id.csv")
.option("header", true)
.option("encoding", "gbk")
.load()
.map(row -> row.getString(0), Encoders.STRING()).collectAsList();
List<String> sensornames = ss.read().format("csv")
.option("path", dir + "/" + ids.get(0)).option("header", true)
.option("encoding", "gbk")
.load()
.map(row -> row.getString(0), Encoders.STRING()).distinct().collectAsList();
Map<String, Integer> sensornameToInt = new HashMap<>();
for (int i=0; i<sensornames.size(); i++) sensornameToInt.put(sensornames.get(i), i);
sensornameToInt.forEach((k,v)->System.out.println(k + " " + v));
/* 统一数据为一个表,5维(id,label,sensorname,data,time) */
/* 使用for存mysql可运行,很慢 尝试改为存为文件 */
List<StructField> fields = new ArrayList<StructField>();
fields.add(DataTypes.createStructField("id", DataTypes.StringType, true));
fields.add(DataTypes.createStructField("label", DataTypes.IntegerType, true));
StructType schema = DataTypes.createStructType(fields);
for (int i = 0; i < ids.size(); i++) {
String id = ids.get(i);
int label = 0;
Pattern p = Pattern.compile("^\\d+-(\\d)+\\.csv");
Matcher m = p.matcher(id);
if (m.matches())
label = Integer.valueOf(m.group(1));
List<Row> rows = new ArrayList<>();
rows.add(RowFactory.create(id, label));
Dataset<Row> l = ss.createDataFrame(rows, schema);
Dataset<Row> r = ss.read().format("csv").option("path", dir + "/" + id).option("header", true).option("encoding", "gbk").load();
StructType st = r.schema();
r = ss.createDataFrame(r.javaRDD()
.map(row->RowFactory.create(""+sensornameToInt.get(row.getString(0)), row.get(1), row.get(2)))
, st);
l.join(r).write().mode(i == 0 ? SaveMode.Overwrite : SaveMode.Append).format("csv")
.option("path", "file:///C:/Users/Administrator/Desktop/DistributionBox.csv")
.option("header", true)
.option("encoding", "gbk")
.save();
}
ss.stop();
}
public static void electricityAnalyze(String[] args) throws InterruptedException, AnalysisException {
SparkSession ss = SparkSession.builder().appName("electronic").getOrCreate();
Dataset<Row> rows = ss.read()
.format("csv")
.option("path", "file:///C:/Users/Administrator/Desktop/DistributionBox.csv")
.option("header", true)
.option("encoding", "gbk")
.load();
// rows.groupBy(rows.col("id")).count().show();
List<StructField> fields = new ArrayList<StructField>();
fields.add(DataTypes.createStructField("id", DataTypes.StringType, true));
fields.add(DataTypes.createStructField("label", DataTypes.IntegerType, true));
fields.add(DataTypes.createStructField("sensorname", DataTypes.IntegerType, true));
fields.add(DataTypes.createStructField("data", DataTypes.DoubleType, true));
fields.add(DataTypes.createStructField("time", DataTypes.TimestampType, true));
StructType schema = DataTypes.createStructType(fields);
rows = ss.createDataFrame(rows.javaRDD().map(row->RowFactory.create(row.getString(0), Integer.valueOf(row.getString(1)), Integer.valueOf(row.getString(2)), Double.valueOf(row.getString(3)), new Timestamp(Long.valueOf(row.getString(4))))), schema);
rows.createTempView("DistributionBox");
Dataset<Row> db = ss.sql("select id, sensorname, label, count(data), max(data), min(data), avg(data) from DistributionBox group by id, sensorname, label");
// db.show();
JavaRDD<Tuple2<String, Vector>> kv = db.javaRDD().mapToPair(row->{
String id = row.getString(row.fieldIndex("id"));
int sn = row.getInt(row.fieldIndex("sensorname"));
Map<String, Double> value = new HashMap<>();
value.put("max"+sn, row.getDouble(4));
value.put("min"+sn, row.getDouble(5));
value.put("avg"+sn, row.getDouble(6));
return new Tuple2<>(id, value);
}).reduceByKey((r1,r2)->{
Map<String, Double> value = new HashMap<>();
value.putAll(r1);
value.putAll(r2);
return value;
}).map(t->{
Double[] values = t._2.values().toArray(new Double[]{});
double[] values2 = new double[values.length];
for (int i=0; i<values.length; i++) values2[i] = values[i];
String id = t._1;
return new Tuple2<>(id, Vectors.dense(values2));
});
JavaRDD<Vector> dbv = kv.map(t->t._2);
//dbv.foreach(s->System.out.println(s.getId() + " " + s));
int numClusters = 4;
int numIterations = 20;
KMeansModel clusters = KMeans.train(dbv.rdd(), numClusters, numIterations);
System.out.println("Cluster centers:");
for (Vector center: clusters.clusterCenters()) {
System.out.println(" " + center);
}
double cost = clusters.computeCost(dbv.rdd());
System.out.println("Cost: " + cost);
// Evaluate clustering by computing Within Set Sum of Squared Errors
double WSSSE = clusters.computeCost(dbv.rdd());
System.out.println("Within Set Sum of Squared Errors = " + WSSSE);
/* 1.输出所有vector所属cluster
* 2.连接(clusterId,vector)和原来的(vector,id),(id,label),得到 (clusterId, id, label)*/
//clusters.predict(points)
Dataset<Row> idLable = db.select(db.col("id"), db.col("label")).distinct();
fields = new ArrayList<StructField>();
fields.add(DataTypes.createStructField("id", DataTypes.StringType, true));
fields.add(DataTypes.createStructField("clusterId", DataTypes.IntegerType, true));
schema = DataTypes.createStructType(fields);
Dataset<Row> idClusterId = ss.createDataFrame(kv.map(kv1->RowFactory.create(kv1._1, clusters.predict(kv1._2))), schema);
Dataset<Row> result = idLable.join(idClusterId, "id");
/* 1.取label值不为0的行,取label和clusterId两列,做出由clusterId->label的map映射
* 2.把result中所有配电柜的clusterId翻译成label*/
//result.where(result.col("label").equals(0));
Map<Integer, Integer> clusterIdToLabel = result.where(result.col("label").notEqual(0)).select(result.col("label"), result.col("clusterId"))
.javaRDD()
.map(r->{
Map<Integer, Integer> clusterIdLabelMap = new HashMap<>();
clusterIdLabelMap.put(r.getInt(1), r.getInt(0));
return clusterIdLabelMap;
}).reduce((m1,m2)->{
Map<Integer, Integer> clusterIdLabelMap = new HashMap<>();
clusterIdLabelMap.putAll(m1);
clusterIdLabelMap.putAll(m2);
return clusterIdLabelMap;
});
System.out.println(clusterIdToLabel);
fields = new ArrayList<StructField>();
fields.add(DataTypes.createStructField("id", DataTypes.StringType, true));
fields.add(DataTypes.createStructField("knownLabel", DataTypes.IntegerType, true));
fields.add(DataTypes.createStructField("predictedLabel", DataTypes.IntegerType, true));
schema = DataTypes.createStructType(fields);
result = ss.createDataFrame(result.javaRDD().map(kv1->RowFactory.create(kv1.getString(0), kv1.getInt(1), clusterIdToLabel.get(kv1.getInt(2)))), schema);
Properties pro = new Properties();
pro.put("driver", "com.mysql.jdbc.Driver");
pro.put("dbtable", "DistributionBox");
pro.put("url", "jdbc:mysql://ip:3306/dbname?useUnicode=true&characterEncoding=utf8&user=root&password=123456");
result.write().mode(SaveMode.Overwrite).jdbc(pro.getProperty("url"),pro.getProperty("dbtable"), pro);
ss.stop();
}
1.环境
1.1.服务端
1.1.1.宿主环境
1.1.1.1.处理器/4核/8线程(X64 i7-4790K 4.00GHz) 8G内存 256G固态硬盘/2T机械硬盘 (有的主板需要打开Intel VT(虚拟技术))
1.1.1.2.操作系统64位Windows 7 旗舰版 Service Pack 1
1.1.1.3.无任务剩余资源:100%CPU 6G内存 90G固态硬盘
1.1.2.虚拟硬件(安装VMware-workstation-full-10.0.2-1744117.1398244508)
1.1.2.1.新建虚拟机
1.1.2.2.自定义(高级)
1.1.2.3.Workstation 10.0
1.1.2.4.安装程序光盘映像(iso)(选择CentOS-6.5-x86_64-bin-DVD1.iso所在路径)
1.1.2.5.全名(node1)及用户名密码
1.1.2.6.虚拟机名称和位置
1.1.2.7.处理器数量选择1,核心数量2
1.1.2.8.内存3g
1.1.2.9.网络连接:使用桥接网络
1.1.2.10.SCSI控制器默认
1.1.2.11.虚拟硬盘类型默认
1.1.2.12.创建新虚拟硬盘
1.1.2.13.最大磁盘大小30G,其它默认
1.1.2.14.硬盘文件,默认
1.1.2.15.完成
1.1.3.操作系统(CentOS-6.5-x86_64-bin-DVD1.iso)
1.1.3.1.开启虚拟机等待安装结束,自已重启,并进入登陆界面
1.1.3.2.ctrl+alt+f1进入桌面(如果当前是终端界面),使用帐号登陆,设置网络(如校园网登陆),保证可使用互联网
1.1.3.3.ctrl+alt+f2进入终端登陆界面,使用root登陆,查看ip地址,退出
1.1.3.4.使用putty管理该结点,putty_V0.63.0.0.43510830.exe -v -ssh -pw password -P 22 root@node1OrIp
1.1.3.5.修改网卡ip地址获取为dhcp(若虚拟机创建时即为桥接模式,则已设为dhcp),使用如下第一行命令编辑,并将相应名值对修改如下第二行.操作命令见界面下提示(^x 表示ctrl+x 退出 ^o保存)
nano /etc/sysconfig/network-scripts/ifcfg-eth0
BOOTPROTO="dhcp"
1.1.3.6.关闭selinux,为影响smb使用
nano /etc/selinux/config
SELINUX=disabled
1.1.3.7.联网条件下安装smb server与client
#不同牌的centos可能不一样(可能安装名是smb,而不是samba)
yum -y install samba
mv /etc/samba/smb.conf /etc/samba/smb.conf_bak
#新建该文件并写入(注意每行前没有空格)
nano /etc/samba/smb.conf
[global]
workgroup = WORKGROUP
server string = hi
netbios name = hi
security = user
[hi]
comment = hi
path = /
public = no
writable = yes
guest = no
browseable = yes
valid users = root,hds
#admin users = hds
create mask = 0765
#开机启动smb
chkconfig smb on
#或者使用以下方式开机启动
nano /etc/rc.d/rc.local
service smb start
1.1.3.8.修改主机名
nano /etc/sysconfig/network
HOSTNAME=node1
1.1.3.9.添加hadoop用户及组,设置访问密码
groupadd hadoop
useradd -s /bin/bash -d /home/hds -m hds -g hadoop
passwd hds
smbpasswd -a hds
smbpasswd -a root
1.1.3.10.共享文件存储空间
#先在开发机windows上面共享一个具有读写权的文件夹
#root下操作
mkdir /home/hds/center
chown -R hds /home/hds/center
chgrp -R hadoop /home/hds/center
#开机挂载
nano /etc/rc.d/rc.local
mount -t cifs -o username=administrator,passwd=password,rw,dir_mode=0777,file_mode=0777 //centerIp/center /home/hds/center
#或使用fstab开挂载
nano /etc/fstab
//centerIp/center /home/hds/center cifs username=administrator,passwd=password,rw,dir_mode=0777,file_mode=0777 0 2
df
1.1.3.11.免密访问
#root登陆
ssh-keygen -t dsa -P '' -f ~/.ssh/id_dsa
mv ~/.ssh/id_dsa.pub ~/.ssh/authorized_keys
#hds登陆
su hds
ssh-keygen -t dsa -P '' -f ~/.ssh/id_dsa
mv ~/.ssh/id_dsa.pub ~/.ssh/authorized_keys
1.1.3.12 修改防火墙
#关掉(避免复杂的iptables设置)
chkconfig iptables off
#或者设置(需要很明确打开哪些端口,hadoop及spark会启动很多端口)
iptables -I INPUT -p tcp --dport 80 -j ACCEPT
iptables -I INPUT -p tcp --dport 8080 -j ACCEPT
iptables -I INPUT -p tcp --dport 8088 -j ACCEPT
iptables -I INPUT -p tcp --dport 4040 -j ACCEPT
iptables -I INPUT -p tcp --dport 443 -j ACCEPT
iptables -I INPUT -p tcp --dport 53 -j ACCEPT
iptables -I INPUT -p tcp --dport 139 -j ACCEPT
iptables -I INPUT -p tcp --dport 445 -j ACCEPT
/etc/rc.d/init.d/iptables save
service iptables restart
chkconfig iptables on
iptables -L -x -v -n
1.1.3.13.reboot
1.1.3.14.验证之前的设置上否正确,此时系统内存占用不到300m,磁盘不到3G
1.1.3.15.关机,虚拟机完整clone,按需要clone需要的数量,本环境下还可clone一台
1.1.3.16.修改hosts及hostname取得各结点ip地址,并为其命名,并保存在\\centerIP\center\nodes.txt
172.16.2.106 node1
172.16.2.57 node2
cat /home/hds/center/nodes.txt >> /etc/hosts
scp -r /etc/hosts root@node2:/etc/hosts
#手动(也可以写shell)修改各结点主机名
ssh node2
hostname node2
nano /etc/sysconfig/network
HOSTNAME=node2
1.1.3.17.使用ssh在各个结点登陆一次,既验证,也是为发初始回答yes
#root登陆
ssh node2
ssh node1
#hds登陆
ssh node2
ssh node1
1.1.4.JAVA/HADOOP(hdfs/yarn)
1.1.4.1.以任何方式下载以下文件,放入\\centerIP\center\目录下
jdk-8u73-linux-x64.tar.gz
hadoop-2.6.4.tar.gz
1.1.4.2.以hds(以下默认以hds用户操作)在各结点登陆解压至其home
tar zxvf ~/center/jdk-8u73-linux-x64.tar.gz
tar zxvf ~/center/hadoop-2.6.4.tar.gz
1.1.4.3.在每个结点创建以下目录
mkdir /tmp/tmp
mkdir ~/namenodeNameDir
mkdir ~/datanodeDataDir
1.1.4.4.配置hadoop
#复制~/hadoop-2.6.4/etc/hadoop 为~/center/conf
mkdir ~/center/logs
mkdir ~/center/conf
cp -R ~/hadoop-2.6.4/etc/hadoop/* ~/center/conf/
nano ~/center/conf/core-site.xml
<configuration>
<property><name>fs.defaultFS</name><value>hdfs://node1:9000</value></property>
<property><name>hadoop.tmp.dir</name><value>file:/tmp/tmp</value><description>tmp</description></property>
<property><name>io.file.buffer.size</name><value>131072</value></property>
</configuration>
#xml配置中的路径需要完整,不能是如 file:~/namenodeNameDir
nano ~/center/conf/hdfs-site.xml
<configuration>
<property><name>dfs.namenode.name.dir</name><value>file:/home/hds/namenodeNameDir</value></property>
<property><name>dfs.datanode.data.dir</name><value>file:/home/hds/datanodeDataDir</value></property>
<property><name>dfs.replication</name><value>2</value></property>
<property><name>dfs.webhdfs.enabled</name><value>true</value></property>
</configuration>
#让每个yarn计算结点管理2G(1G留给系统)内存,2*6=12G虚存,两个核,每次申请最多只允许申请2g内存
nano ~/center/conf/yarn-site.xml
<configuration>
<property><name>yarn.resourcemanager.address</name><value>node1:8032</value></property>
<property><name>yarn.resourcemanager.scheduler.address</name><value>node1:8030</value></property>
<property><name>yarn.resourcemanager.resource-tracker.address</name><value>node1:8035</value></property>
<property><name>yarn.resourcemanager.admin.address</name><value>node1:8033</value></property>
<property><name>yarn.resourcemanager.webapp.address</name><value>node1:8088</value></property>
<property><name>yarn.nodemanager.aux-services</name><value>mapreduce_shuffle</value></property>
<property><name>yarn.nodemanager.aux-services.mapreduce.shuffle.class</name><value>org.apache.hadoop.mapred.ShuffleHandler</value></property>
<property><name>yarn.nodemanager.resource.memory-mb</name><value>2048</value></property>
<property><name>yarn.nodemanager.vmem-pmem-ratio</name><value>6</value></property>
<property><name>yarn.nodemanager.pmem-check-enabled</name><value>true</value></property>
<property><name>yarn.nodemanager.vmem-check-enabled</name><value>true</value></property>
<property><name>yarn.scheduler.minimum-allocation-mb</name><value>16</value></property>
<property><name>yarn.scheduler.maximum-allocation-mb</name><value>2048</value></property>
<property><name>yarn.nodemanager.resource.cpu-vcores</name><value>2</value></property>
<property><name>yarn.scheduler.minimum-allocation-vcores</name><value>1</value></property>
<property><name>yarn.scheduler.maximum-allocation-vcores</name><value>2</value></property>
</configuration>
nano ~/center/conf/slaves
node1
node2
1.1.4.5.修改 .bashrc,文件尾部添加
nano ~/.bashrc
export JAVA_HOME=~/jdk1.8.0_73
export HADOOP_HOME=~/hadoop-2.6.4
export CLASSPATH=.:$JAVA_HOME/jre/lib:$JAVA_HOME/lib:$JAVA_HOME/lib/tools.jar
export PATH=$PATH:$JAVA_HOME/bin:$HADOOP_HOME/bin
export HADOOP_CONF_DIR=~/center/conf
export HADOOP_LOG_DIR=~/center/logs
scp ~/.bashrc hds@node2:~/.bashrc
1.1.4.6.初始化
~/hadoop-2.6.4/bin/hdfs namenode -format
1.1.4.7.启动
~/hadoop-2.6.4/sbin/stop-yarn.sh
~/hadoop-2.6.4/sbin/stop-dfs.sh
~/hadoop-2.6.4/sbin/start-dfs.sh
~/hadoop-2.6.4/sbin/start-yarn.sh
1.1.4.8.验证
#主结点包含 hdfs的主结点NameNode和SecondNameNode Yarn的主结点ResourceManager
#从结点包含 hdfs的从结点DataNode yarn的从结点NodeManager
#node1既是主结点也是从结点,node2仅是从结点
jps
3712 DataNode
4403 Jps
4102 NodeManager
4007 ResourceManager
3865 SecondaryNameNode
3594 NameNode
ssh node2
jps
2482 NodeManager
2379 DataNode
2639 Jps
#分别为hdfs/yarn集群
http://node1:50070
http://node1:8088/cluster/nodes
1.1.4.9.资源剩余: 内存2.2G 磁盘22G
free -m
df -m
1.2.客户端
1.2.1.硬件:1处理器/4核(AMD A8-5600K) 4G内存 1T机械硬盘
1.2.2.OS: windows7 旗舰版 Service Pack1
1.2.3.对于以下软件,进行下载,安装或解压至某个目录,其中hadoop-eclipse-plugin-2.2.0.jar插件直接丢进eclipseHome/plugins/目录下.scala暂时示使用
jdk-8-windows-x64.zip
apache-maven-3.3.9-bin.zip
eclipse-jee-mars-1-win32-x86_64.zip
hadoop-2.6.4.tar.gz
scala-2.11.6.tgz
spark-2.0.0-bin-hadoop2.6.tgz
hadoop-eclipse-plugin-2.2.0.jar
1.2.4.环境变量与命令接口(%yang%为软件所在目录,%center%为上述共享目录,该版本eclips自带maven,但没有独立版的速度快和灵活)
#创建 hds.bat
set yang=......
set center=......
set java_home=%yang%\jdk1.8.0_60
set maven_home=%yang%\apache-maven-3.3.9
set ECLIPSE_HOME=%yang%\eclipse
set HADOOP_HOME=%yang%\hadoop-2.6.4
set HADOOP_CONF_DIR=%center%\conf
set HADOOP_USER_NAME=hds
set SCALA_HOME=%yang%\scala-2.11.6
set SPARK_HOME=%yang%\spark-2.0.0-bin-hadoop2.6
set classpath=.;%java_home%\lib
set path=.;%HADOOP_HOME%\bin;%java_home%\bin;%JAVA_HOME%\jre\bin\client\;%maven_home%\bin;%path%
start cmd /k "doskey eclipse=start %ECLIPSE_HOME%\eclipse.exe"
1.2.5.eclipse
1.2.5.1.上一步打开的命令行中输入 eclipse 回车,即可运行eclipse,选择定workspace后,按需要设置maven等
1.2.5.2.新建工程->Maven Project->Create a simple project(打勾)->填写 Groud Id(如Learning)和Atfifact Id(如Spark),其它默认->finish
1.2.5.3.修改pom.xml文件内容为:
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>Learning</groupId>
<artifactId>Spark</artifactId>
<version>0.0.1-SNAPSHOT</version>
<packaging>jar</packaging>
<properties>
<project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
</properties>
<dependencies>
<dependency>
<groupId>org.apache.hadoop</groupId>
<artifactId>hadoop-client</artifactId>
<version>2.6.4</version>
</dependency>
<dependency>
<groupId>mysql</groupId>
<artifactId>mysql-connector-java</artifactId>
<version>5.1.18</version>
</dependency>
<dependency>
<groupId>org.apache.spark</groupId>
<artifactId>spark-mllib_2.10</artifactId>
<version>2.0.0</version>
</dependency>
</dependencies>
<build>
<plugins>
<plugin>
<artifactId>maven-compiler-plugin</artifactId>
<version>3.3</version>
<configuration>
<source>1.8</source>
<target>1.8</target>
</configuration>
</plugin>
<plugin>
<artifactId>maven-assembly-plugin</artifactId>
<configuration>
<archive>
<manifest>
<mainClass>org.shirdrn.spark.job.UserAgentStats</mainClass>
</manifest>
</archive>
<descriptorRefs>
<descriptorRef>jar-with-dependencies</descriptorRef>
</descriptorRefs>
<excludes>
<exclude>*.properties</exclude>
<exclude>*.xml</exclude>
</excludes>
</configuration>
<executions>
<execution>
<id>make-assembly</id>
<phase>package</phase>
<goals>
<goal>single</goal>
</goals>
</execution>
</executions>
</plugin>
</plugins>
</build>
</project>
1.2.5.4.alt+f5 选择此项目点OK以更新maven项目(更新完后,会提示错,其实不影响,可从Problems视图里删掉这些错误提示)
1.2.5.5.复制%spark_home%\examples\src进工程根目录,覆盖原目录,然后在eclipse选择工程按f5刷新,删除除了org.apache.spark.examples外的其它包,将以该包的JavaSparkPi为例运行
1.3.5.6.新建main程序,用以编写JavaSparkPi的launcher.
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import org.apache.spark.launcher.SparkLauncher;
public class PiLauncher {
static class InputStreamReaderRunnable implements Runnable {
private BufferedReader reader;
private String name;
public InputStreamReaderRunnable(InputStream is, String name) {
this.reader = new BufferedReader(new InputStreamReader(is));
this.name = name;
}
public void run() {
System.out.println("InputStream " + name + ":");
try {
String line = reader.readLine();
while (line != null) {
System.out.println(line);
line = reader.readLine();
}
reader.close();
} catch (IOException e) {
e.printStackTrace();
}
}
}
public static void main(String[] args) throws Exception {
SparkLauncher spark1 = new SparkLauncher()
.setMainClass("org.apache.spark.examples.JavaSparkPi")
.addAppArgs("100")
.setConf("spark.executor.instances", "3")
.setConf(SparkLauncher.DRIVER_MEMORY, "512m")
.setConf("spark.yarn.am.memory", "512m")
.setConf(SparkLauncher.EXECUTOR_MEMORY, "512m")
.setConf(SparkLauncher.EXECUTOR_CORES, "1")
//YARN cluster mode
.setMaster("yarn").setDeployMode("client").setAppResource("target/Spark-0.0.1-SNAPSHOT-jar-with-dependencies.jar").setConf("spark.sql.warehouse.dir", "file:///C:/Users/Administrator/AppData/Local/Temp/warehouse")
.setVerbose(true);
Process spark = spark1.launch();
InputStreamReaderRunnable inputStreamReaderRunnable = new InputStreamReaderRunnable(spark.getInputStream(),"input");
Thread inputThread = new Thread(inputStreamReaderRunnable, "LogStreamReader input");
inputThread.start();
InputStreamReaderRunnable errorStreamReaderRunnable = new InputStreamReaderRunnable(spark.getErrorStream(),"error");
Thread errorThread = new Thread(errorStreamReaderRunnable, "LogStreamReader error");
errorThread.start();
System.out.println("Waiting for finish...");
int exitCode = spark.waitFor();
System.out.println("Finished! Exit code:" + exitCode);
}
}
1.3.5.7.run as maven build...->goals写package->run以打包,下载依赖需要很长时间,有时还会卡死,需要重新执行.
1.3.5.8.选择上面的launcher以java application运行.打印的日志包含:
......
16/08/06 11:39:01 INFO cluster.YarnScheduler: Removed TaskSet 0.0, whose tasks have all completed, from pool
Pi is roughly 3.1419064
16/08/06 11:39:01 INFO scheduler.DAGScheduler: Job 0 finished: reduce at JavaSparkPi.java:59, took 72.764996 s
......
2.应用(注意资源的供给,当单次任务需求过多资源时,应手动分成多次执行任务,否则会OOM)
18:58 2016/8/6 电气隐患的数据挖掘
1.理解数据
1.1.N个配电柜,每个8组数据,每组数据(x,y)分别为时刻和该时刻传感器采集感知的值.
1.2.每个配电柜可能正常也可能隐患,目的是找出各配电柜模式,再分析哪些是隐患模式,哪些是正常模式,或者说各模式分别属于哪个隐患类别.
1.3.需要从每个配电柜的包含8个函数的数据文件中计算出一个对象用以代表此配电柜.如8个量的最大最小平均值组成的8*3=24维向量.
1.4.人可以分析出其中的规律,但数据量太多,需要交由机器处理,人只需要告诉机器自己是怎么处理的.
1.5.可以一点一点地比较,先比较各量平均值差异,再比较最大最小及其组合等,直到各模式显著不同.
1.6.不一定非要用spark api,用一切可以使用的api,只要达到了目的,尽管方法可能只是小数据才适用
2.上网查已有研究
2.1.配电柜隐患 低压(200v-400v)配电柜 配电网时空故障信息/故障诊断 温度/老化检测(不要太潮湿，常检查有无绝缘老化现象) 振动(曾有过所钢窗的塑料皮（带金属）刮倒变压器上造成短路)
3.实践
3.1.取得所有配电柜的文件名,文件名是配电柜的id
cd /d C:\Users\Administrator\Desktop\electronic
dir /b > id.csv
3.2.id.csv + data.csv = table.DistrubutionBox
3.3.将合并的表存入文件比存入mysql快很多.存文件时不能以文本存,因为表有多于一列的数据
3.4. text < csv < json < parque < mysql < hive
解释:
文件格式的数据类型强度. 意识到这点,才想起.csv是文本格式的,想要用比如数值最好用 mysql,但mysql太慢,hive暂时还未学习,使用parpue应该是不错的选择.这里暂时选择csv,代码手动指定其schema
3.5.逻辑处理流程(向量组DAG):
file -> (fileName(id),file) -> (id, label, sensorname, data, time) -> (id, label, sensorname, max(data), min(data), avg(data) -> (id, max_s0, min_s0, avg_s0, max_s1 ... max_s7, min_s7, avg_s7) -> (id, vector) (聚类得:)f:vector->clusterId (id, vector) -> (id,clusterId) (id,clusterId) join (id,label) by id -> (id,label,clusterId) -> f:cluster->label (id,label,clusterId)->(id,knownLabel,prediectedLabel)
解释:
(在这里以向量组来表示问题,一个向量组同时也是向量集合Collection<Vector>,也是一张数据库表.)
(这是一个抽象概念. 当看到spark的DAG时很亲切,一直想找个可以用DAG表示处理流程的工具,本想着有时间自己去实现一个,我称之为发展DAG.其实这种概念在不少软件里都有,但一来不太了解,二来可能用起来会发现跟我想要的不一样)
(RDD DAG与这里的向量组DAG相比,这里的向量组DAG可能会更加抽象?)
file 原始数据是一组文件,部分是有label的(仅5个),部分是无label的(159个)
(fileName(id), file) file隐含了这样的向量,一个fileName唯一对应一个配电柜,以其作为id,一个配电柜也唯一对应一组数据
(id,label,sensorname,data,time) 将(fileName(id), file)中的file数据取出,与id笛卡尔乘,同时fileName中包含label数据,如果文件名是 ^\d+-\d+\.csv格式,则后一个\d+是label,否则认为分类未知而为0
(id, label, sensorname, max(data), min(data), avg(data) 对上表或向量组,执行sql:select id, sensorname, label, count(data), max(data), min(data), avg(data) from DistributionBox group by id, sensorname, label
(id, max_s0, min_s0, avg_s0, max_s1 ... max_s7, min_s7, avg_s7) 对一表reduceByKey(id),把每个id对应的配电柜数据转换成一个向量,这个转换过程很重要,此方法的好坏决定后续分类预测结果的好坏.
(id, vector) 上表,虽本是向量组,但为了方便使用,而把后面的24维作为一个vector,在与id一些作为一个向量.
(聚类得:)f:vector->clusterId 取上表中的vector作为K-MEANS聚类的输入,并指定4个cluster,结果得出了此函数.
(id, vector) -> (id,clusterId) 利用上述函数,得(id, clusterId),即得出每个配电柜所属的cluster,也是其所属的模式.
(id,clusterId) join (id,label) by id -> (id,label,clusterId) 表连接
f:cluster->label 通过上表得函数
(id,label,clusterId)->(id,knownLabel,prediectedLabel) 使用上函数,得最终结果
4.改进
4.1.采集尽可能多的数据,有些量一旦偏离正常值则有问题,有些组合量偏离正常空间则有问题
5.结果
每次运行的结果会不一样,有一次,它把2和4当作同一类了.
以下这次结果显示:有分类的都与原来预测的一样(最后5行),从来有理由相信,未知分类的预测也是较可信的.
+---------+------------+----------------+
| id | knownLabel | predictedLabel |
+---------+------------+----------------+
| 146.csv | 0 | 3 |
| 45.csv | 0 | 2 |
| 53.csv | 0 | 3 |
| 145.csv | 0 | 2 |
| 91.csv | 0 | 4 |
| 110.csv | 0 | 4 |
| 114.csv | 0 | 2 |
| 94.csv | 0 | 4 |
| 13.csv | 0 | 4 |
| 44.csv | 0 | 3 |
| 127.csv | 0 | 2 |
| 9.csv | 0 | 2 |
| 29.csv | 0 | 4 |
| 92.csv | 0 | 4 |
| 117.csv | 0 | 4 |
| 96.csv | 0 | 2 |
| 24.csv | 0 | 2 |
| 111.csv | 0 | 2 |
| 82.csv | 0 | 4 |
| 34.csv | 0 | 4 |
| 122.csv | 0 | 4 |
| 134.csv | 0 | 4 |
| 78.csv | 0 | 4 |
| 30.csv | 0 | 2 |
| 147.csv | 0 | 2 |
| 81.csv | 0 | 2 |
| 109.csv | 0 | 4 |
| 106.csv | 0 | 3 |
| 61.csv | 0 | 1 |
| 83.csv | 0 | 2 |
| 79.csv | 0 | 2 |
| 132.csv | 0 | 2 |
| 26.csv | 0 | 2 |
| 20.csv | 0 | 2 |
| 38.csv | 0 | 2 |
| 150.csv | 0 | 2 |
| 86.csv | 0 | 2 |
| 103.csv | 0 | 1 |
| 87.csv | 0 | 4 |
| 52.csv | 0 | 3 |
| 116.csv | 0 | 1 |
| 107.csv | 0 | 3 |
| 67.csv | 0 | 4 |
| 15.csv | 0 | 2 |
| 97.csv | 0 | 1 |
| 27.csv | 0 | 3 |
| 48.csv | 0 | 3 |
| 5.csv | 0 | 3 |
| 159.csv | 0 | 4 |
| 113.csv | 0 | 2 |
| 12.csv | 0 | 2 |
| 144.csv | 0 | 2 |
| 131.csv | 0 | 2 |
| 22.csv | 0 | 3 |
| 139.csv | 0 | 2 |
| 115.csv | 0 | 3 |
| 112.csv | 0 | 4 |
| 135.csv | 0 | 3 |
| 47.csv | 0 | 3 |
| 18.csv | 0 | 2 |
| 90.csv | 0 | 4 |
| 152.csv | 0 | 3 |
| 1.csv | 0 | 2 |
| 125.csv | 0 | 4 |
| 37.csv | 0 | 2 |
| 40.csv | 0 | 4 |
| 28.csv | 0 | 2 |
| 136.csv | 0 | 4 |
| 100.csv | 0 | 4 |
| 138.csv | 0 | 1 |
| 11.csv | 0 | 2 |
| 33.csv | 0 | 4 |
| 16.csv | 0 | 3 |
| 141.csv | 0 | 2 |
| 148.csv | 0 | 4 |
| 25.csv | 0 | 2 |
| 21.csv | 0 | 2 |
| 140.csv | 0 | 2 |
| 155.csv | 0 | 2 |
| 85.csv | 0 | 3 |
| 39.csv | 0 | 4 |
| 54.csv | 0 | 3 |
| 41.csv | 0 | 2 |
| 23.csv | 0 | 2 |
| 19.csv | 0 | 2 |
| 35.csv | 0 | 3 |
| 31.csv | 0 | 2 |
| 130.csv | 0 | 2 |
| 69.csv | 0 | 3 |
| 80.csv | 0 | 2 |
| 137.csv | 0 | 2 |
| 72.csv | 0 | 4 |
| 153.csv | 0 | 2 |
| 119.csv | 0 | 3 |
| 105.csv | 0 | 3 |
| 51.csv | 0 | 1 |
| 98.csv | 0 | 4 |
| 57.csv | 0 | 2 |
| 6.csv | 0 | 2 |
| 101.csv | 0 | 2 |
| 14.csv | 0 | 2 |
| 129.csv | 0 | 4 |
| 143.csv | 0 | 2 |
| 88.csv | 0 | 2 |
| 154.csv | 0 | 2 |
| 89.csv | 0 | 2 |
| 121.csv | 0 | 3 |
| 124.csv | 0 | 4 |
| 59.csv | 0 | 2 |
| 77.csv | 0 | 2 |
| 42.csv | 0 | 2 |
| 32.csv | 0 | 4 |
| 62.csv | 0 | 2 |
| 76.csv | 0 | 2 |
| 74.csv | 0 | 3 |
| 63.csv | 0 | 4 |
| 126.csv | 0 | 2 |
| 95.csv | 0 | 3 |
| 8.csv | 0 | 2 |
| 17.csv | 0 | 2 |
| 56.csv | 0 | 2 |
| 3.csv | 0 | 4 |
| 133.csv | 0 | 4 |
| 4.csv | 0 | 4 |
| 49.csv | 0 | 2 |
| 73.csv | 0 | 2 |
| 84.csv | 0 | 2 |
| 158.csv | 0 | 4 |
| 93.csv | 0 | 2 |
| 58.csv | 0 | 4 |
| 128.csv | 0 | 2 |
| 64.csv | 0 | 4 |
| 118.csv | 0 | 1 |
| 157.csv | 0 | 2 |
| 65.csv | 0 | 2 |
| 2.csv | 0 | 2 |
| 151.csv | 0 | 2 |
| 46.csv | 0 | 4 |
| 102.csv | 0 | 4 |
| 66.csv | 0 | 4 |
| 71.csv | 0 | 3 |
| 10.csv | 0 | 2 |
| 68.csv | 0 | 2 |
| 43.csv | 0 | 1 |
| 7.csv | 0 | 3 |
| 75.csv | 0 | 3 |
| 120.csv | 0 | 3 |
| 149.csv | 0 | 3 |
| 99.csv | 0 | 2 |
| 104.csv | 0 | 2 |
| 156.csv | 0 | 2 |
| 60.csv | 0 | 3 |
| 50.csv | 0 | 2 |
| 108.csv | 0 | 2 |
| 142.csv | 0 | 2 |
| 123.csv | 0 | 2 |
| 36.csv | 0 | 2 |
| 55.csv | 0 | 2 |
| 70.csv | 0 | 4 |
| 1-1.csv | 1 | 1 |
| 3-1.csv | 1 | 1 |
| 2-2.csv | 2 | 2 |
| 5-3.csv | 3 | 3 |
| 4-4.csv | 4 | 4 |
+---------+------------+----------------+
6.代码
public static void electricity(String[] args) throws InterruptedException {
SparkSession ss = SparkSession.builder().appName("electronic").getOrCreate();
/* 一个.csv是一个配电柜,也是一个对象,其包含(文件名id,标签,数据) */
String dir = "file:///C:/Users/Administrator/Desktop/electronic";
List<String> ids = ss.read().format("csv")
.option("path", dir + "/id.csv")
.option("header", true)
.option("encoding", "gbk")
.load()
.map(row -> row.getString(0), Encoders.STRING()).collectAsList();
List<String> sensornames = ss.read().format("csv")
.option("path", dir + "/" + ids.get(0)).option("header", true)
.option("encoding", "gbk")
.load()
.map(row -> row.getString(0), Encoders.STRING()).distinct().collectAsList();
Map<String, Integer> sensornameToInt = new HashMap<>();
for (int i=0; i<sensornames.size(); i++) sensornameToInt.put(sensornames.get(i), i);
sensornameToInt.forEach((k,v)->System.out.println(k + " " + v));
/* 统一数据为一个表,5维(id,label,sensorname,data,time) */
/* 使用for存mysql可运行,很慢 尝试改为存为文件 */
List<StructField> fields = new ArrayList<StructField>();
fields.add(DataTypes.createStructField("id", DataTypes.StringType, true));
fields.add(DataTypes.createStructField("label", DataTypes.IntegerType, true));
StructType schema = DataTypes.createStructType(fields);
for (int i = 0; i < ids.size(); i++) {
String id = ids.get(i);
int label = 0;
Pattern p = Pattern.compile("^\\d+-(\\d)+\\.csv");
Matcher m = p.matcher(id);
if (m.matches())
label = Integer.valueOf(m.group(1));
List<Row> rows = new ArrayList<>();
rows.add(RowFactory.create(id, label));
Dataset<Row> l = ss.createDataFrame(rows, schema);
Dataset<Row> r = ss.read().format("csv").option("path", dir + "/" + id).option("header", true).option("encoding", "gbk").load();
StructType st = r.schema();
r = ss.createDataFrame(r.javaRDD()
.map(row->RowFactory.create(""+sensornameToInt.get(row.getString(0)), row.get(1), row.get(2)))
, st);
l.join(r).write().mode(i == 0 ? SaveMode.Overwrite : SaveMode.Append).format("csv")
.option("path", "file:///C:/Users/Administrator/Desktop/DistributionBox.csv")
.option("header", true)
.option("encoding", "gbk")
.save();
}
ss.stop();
}
public static void electricityAnalyze(String[] args) throws InterruptedException, AnalysisException {
SparkSession ss = SparkSession.builder().appName("electronic").getOrCreate();
Dataset<Row> rows = ss.read()
.format("csv")
.option("path", "file:///C:/Users/Administrator/Desktop/DistributionBox.csv")
.option("header", true)
.option("encoding", "gbk")
.load();
// rows.groupBy(rows.col("id")).count().show();
List<StructField> fields = new ArrayList<StructField>();
fields.add(DataTypes.createStructField("id", DataTypes.StringType, true));
fields.add(DataTypes.createStructField("label", DataTypes.IntegerType, true));
fields.add(DataTypes.createStructField("sensorname", DataTypes.IntegerType, true));
fields.add(DataTypes.createStructField("data", DataTypes.DoubleType, true));
fields.add(DataTypes.createStructField("time", DataTypes.TimestampType, true));
StructType schema = DataTypes.createStructType(fields);
rows = ss.createDataFrame(rows.javaRDD().map(row->RowFactory.create(row.getString(0), Integer.valueOf(row.getString(1)), Integer.valueOf(row.getString(2)), Double.valueOf(row.getString(3)), new Timestamp(Long.valueOf(row.getString(4))))), schema);
rows.createTempView("DistributionBox");
Dataset<Row> db = ss.sql("select id, sensorname, label, count(data), max(data), min(data), avg(data) from DistributionBox group by id, sensorname, label");
// db.show();
JavaRDD<Tuple2<String, Vector>> kv = db.javaRDD().mapToPair(row->{
String id = row.getString(row.fieldIndex("id"));
int sn = row.getInt(row.fieldIndex("sensorname"));
Map<String, Double> value = new HashMap<>();
value.put("max"+sn, row.getDouble(4));
value.put("min"+sn, row.getDouble(5));
value.put("avg"+sn, row.getDouble(6));
return new Tuple2<>(id, value);
}).reduceByKey((r1,r2)->{
Map<String, Double> value = new HashMap<>();
value.putAll(r1);
value.putAll(r2);
return value;
}).map(t->{
Double[] values = t._2.values().toArray(new Double[]{});
double[] values2 = new double[values.length];
for (int i=0; i<values.length; i++) values2[i] = values[i];
String id = t._1;
return new Tuple2<>(id, Vectors.dense(values2));
});
JavaRDD<Vector> dbv = kv.map(t->t._2);
//dbv.foreach(s->System.out.println(s.getId() + " " + s));
int numClusters = 4;
int numIterations = 20;
KMeansModel clusters = KMeans.train(dbv.rdd(), numClusters, numIterations);
System.out.println("Cluster centers:");
for (Vector center: clusters.clusterCenters()) {
System.out.println(" " + center);
}
double cost = clusters.computeCost(dbv.rdd());
System.out.println("Cost: " + cost);
// Evaluate clustering by computing Within Set Sum of Squared Errors
double WSSSE = clusters.computeCost(dbv.rdd());
System.out.println("Within Set Sum of Squared Errors = " + WSSSE);
/* 1.输出所有vector所属cluster
* 2.连接(clusterId,vector)和原来的(vector,id),(id,label),得到 (clusterId, id, label)*/
//clusters.predict(points)
Dataset<Row> idLable = db.select(db.col("id"), db.col("label")).distinct();
fields = new ArrayList<StructField>();
fields.add(DataTypes.createStructField("id", DataTypes.StringType, true));
fields.add(DataTypes.createStructField("clusterId", DataTypes.IntegerType, true));
schema = DataTypes.createStructType(fields);
Dataset<Row> idClusterId = ss.createDataFrame(kv.map(kv1->RowFactory.create(kv1._1, clusters.predict(kv1._2))), schema);
Dataset<Row> result = idLable.join(idClusterId, "id");
/* 1.取label值不为0的行,取label和clusterId两列,做出由clusterId->label的map映射
* 2.把result中所有配电柜的clusterId翻译成label*/
//result.where(result.col("label").equals(0));
Map<Integer, Integer> clusterIdToLabel = result.where(result.col("label").notEqual(0)).select(result.col("label"), result.col("clusterId"))
.javaRDD()
.map(r->{
Map<Integer, Integer> clusterIdLabelMap = new HashMap<>();
clusterIdLabelMap.put(r.getInt(1), r.getInt(0));
return clusterIdLabelMap;
}).reduce((m1,m2)->{
Map<Integer, Integer> clusterIdLabelMap = new HashMap<>();
clusterIdLabelMap.putAll(m1);
clusterIdLabelMap.putAll(m2);
return clusterIdLabelMap;
});
System.out.println(clusterIdToLabel);
fields = new ArrayList<StructField>();
fields.add(DataTypes.createStructField("id", DataTypes.StringType, true));
fields.add(DataTypes.createStructField("knownLabel", DataTypes.IntegerType, true));
fields.add(DataTypes.createStructField("predictedLabel", DataTypes.IntegerType, true));
schema = DataTypes.createStructType(fields);
result = ss.createDataFrame(result.javaRDD().map(kv1->RowFactory.create(kv1.getString(0), kv1.getInt(1), clusterIdToLabel.get(kv1.getInt(2)))), schema);
Properties pro = new Properties();
pro.put("driver", "com.mysql.jdbc.Driver");
pro.put("dbtable", "DistributionBox");
pro.put("url", "jdbc:mysql://ip:3306/dbname?useUnicode=true&characterEncoding=utf8&user=root&password=123456");
result.write().mode(SaveMode.Overwrite).jdbc(pro.getProperty("url"),pro.getProperty("dbtable"), pro);
ss.stop();
}
0 0
- 大数据应用随想
- 大数据应用
- spark大数据应用
- 大数据应用
- 大数据应用分类
- 大数据应用
- 大数据 应用场景
- 大数据应用
- 中国联通大数据应用
- 大数据时代：大数据的应用
- 大数据实践应用分享
- 大数据概念、算法、应用
- 关键时刻的大数据应用
- 大数据的商业应用
- 腾讯游戏大数据应用
- 大数据的实际应用。
- 架构大数据分析应用
- 权威大数据应用解决方案
- poj 2502 Dijkstra
- Android Studio快捷键
- 基于tcl tk 的HyperView二次开发实例【3】
- 工作后，我该如何学习？
- 301跳转.htaccess 详解以及 .htaccess 参数说明
- 大数据应用
- NSIS x64 位系统下安装
- 针对复制东西Eclipse或者MyEclipse中出现cannot paste the clipboard contents into the selected elements报错问题
- struts2表单重复提交问题
- 冒泡算法
- 11 enum 枚举
- Qt中文乱码终极解决办法
- Linux应用操作感悟
- 跳槽搞懂这些，就不怕被放鸽子！
