CentOS Linux解决Device eth0 does not seem to be present
来源:互联网 发布:上海圣剑网络怎么样 编辑:程序博客网 时间:2024/05/29 12:28
在vm下重新复制虚拟机会出现这个错误
解决的办法
在VMware里克隆出来的CentOS Linux。。
ifconfig...没有看到eth0.。然后重启网卡又报下面错误。
故障现象:
service network restart
Shutting down loopback insterface: [ OK ]
Bringing up loopback insterface: [ OK ]
Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED]
解决办法:
首先,打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示:
# vi /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:9
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:50:bd:1
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
记录下,eth1网卡的mac地址00:0c:29:50:bd:17
接下来,打开/etc/sysconfig/network-scripts/ifcfg-eth0
# vi /etc/sysconfig/network-scripts/ifcfg-eth0
将 DEVICE="eth0" 改成 DEVICE="eth1" ,
将 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址 HWADDR="00:0c:29:50:bd:17"
最后,重启网络
# service network restart
或者
# /etc/init.d/network restart
正常了。
- Linux解决Device eth0 does not seem to be present
- Linux 解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- Linux CentOS解决Device eth0 does not seem to be present问题
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- CentOS Linux解决Device eth0 does not seem to be present
- MongoDB3.2增删查改方法简述(CRUD操作)
- js学习笔记2016.12.26
- 异步任务神器 Celery 简明笔记
- JavaScript 诡异的全局变量和局部变量
- JS操纵属性的两种方法
- CentOS Linux解决Device eth0 does not seem to be present
- 14.bash(2) 与 环境变量
- 实例化Spring容器
- C PRIMER PLUS总结(一)
- postgresql 查看数据库,表,索引,表空间以及大小
- goto
- Composer笔记(三):composer.json文件配置
- Tutorial: 463. Island Perimeter
- 闪回查询和闪回版本查询实验