poj 3020 二分图
来源:互联网 发布:linux创建多级文件夹 编辑:程序博客网 时间:2024/06/06 20:32
Antenna Placement
Time Limit: 1000MS Memory Limit: 65536KTotal Submissions: 8419 Accepted: 4181
Description
The Global Aerial Research Centre has been allotted the task of building the fifth generation of mobile phone nets in Sweden. The most striking reason why they got the job, is their discovery of a new, highly noise resistant, antenna. It is called 4DAir, and comes in four types. Each type can only transmit and receive signals in a direction aligned with a (slightly skewed) latitudinal and longitudinal grid, because of the interacting electromagnetic field of the earth. The four types correspond to antennas operating in the directions north, west, south, and east, respectively. Below is an example picture of places of interest, depicted by twelve small rings, and nine 4DAir antennas depicted by ellipses covering them.
Obviously, it is desirable to use as few antennas as possible, but still provide coverage for each place of interest. We model the problem as follows: Let A be a rectangular matrix describing the surface of Sweden, where an entry of A either is a point of interest, which must be covered by at least one antenna, or empty space. Antennas can only be positioned at an entry in A. When an antenna is placed at row r and column c, this entry is considered covered, but also one of the neighbouring entries (c+1,r),(c,r+1),(c-1,r), or (c,r-1), is covered depending on the type chosen for this particular antenna. What is the least number of antennas for which there exists a placement in A such that all points of interest are covered?
Obviously, it is desirable to use as few antennas as possible, but still provide coverage for each place of interest. We model the problem as follows: Let A be a rectangular matrix describing the surface of Sweden, where an entry of A either is a point of interest, which must be covered by at least one antenna, or empty space. Antennas can only be positioned at an entry in A. When an antenna is placed at row r and column c, this entry is considered covered, but also one of the neighbouring entries (c+1,r),(c,r+1),(c-1,r), or (c,r-1), is covered depending on the type chosen for this particular antenna. What is the least number of antennas for which there exists a placement in A such that all points of interest are covered?
Input
On the first row of input is a single positive integer n, specifying the number of scenarios that follow. Each scenario begins with a row containing two positive integers h and w, with 1 <= h <= 40 and 0 < w <= 10. Thereafter is a matrix presented, describing the points of interest in Sweden in the form of h lines, each containing w characters from the set ['*','o']. A '*'-character symbolises a point of interest, whereas a 'o'-character represents open space.
Output
For each scenario, output the minimum number of antennas necessary to cover all '*'-entries in the scenario's matrix, on a row of its own.
Sample Input
27 9ooo**oooo**oo*ooo*o*oo**o**ooooooooo*******ooo*o*oo*oo*******oo10 1***o******
Sample Output
175
解析:
二分图的最大独立集问题:
最小覆盖 = 点数-最大匹配数。
二分图最大独立集=顶点数-二分图最大匹配。
建图的时候。‘*’和四个方向的'*'建图。由于建图是互相加边。所以在算出最大匹配要除以二。
代码:
#include <iostream>#include <cstdio>#include <cstring>#include <algorithm>#include <vector>using namespace std;const int maxn = 50;bool map[maxn*maxn][maxn*maxn];int dir[][2] = {0, 1, 1, 0, -1, 0, 0, -1};bool mark[maxn*maxn];int cy[maxn*maxn];int cx[maxn*maxn];int n, m, tot;int findpath(int u) { for (int i=0; i<tot; i++) { if (!mark[i] && map[u][i]) { mark[i] = true; if (cy[i] == -1 || findpath(cy[i])) { // 若i没有匹配 或者还有别的匹配。 cy[i] = u; cx[u] = i; return 1; } } } return 0;}int Maxmatch() { memset(cx, -1, sizeof(cx)); memset(cy, -1, sizeof(cy)); int ans = 0; for (int i=0; i<tot; i++) { if (cx[i] == -1) { for (int j=0; j<tot; j++) mark[j] = false; ans += findpath(i); } } return ans;}int main(){//freopen("in.txt","r",stdin);//freopen("out.txt","w",stdout); int T; scanf("%d", &T); while (T--) { memset(map, false, sizeof(map)); tot=0; char g[maxn][maxn]; int hash[maxn][maxn]; scanf("%d%d", &n, &m); for (int i=0; i<n; i++) { scanf("%s", g[i]); for (int j=0; j<m; j++) if (g[i][j] == '*') hash[i][j] = tot++; } for (int i=0; i<n; i++) { for (int j=0; j<m; j++) { if (g[i][j] == '*') { int u = i*m+j; for (int k=0; k<4; k++) { int nx = i+dir[k][0]; int ny = j+dir[k][1]; if (nx < 0 || nx >= n) continue; if (ny < 0 || ny >= m) continue; if (g[nx][ny] == '*') { int v = nx*m+ny; map[hash[i][j]][hash[nx][ny]] = true; } } } } } int ans = Maxmatch(); cout << tot-ans/2 << endl; }return 0;}
0 0
- poj 3020 二分图
- poj 3020 二分图
- poj-3020-3041-二分图
- 二分图小结-poj.3020
- poj 3020 Antenna Placement 二分图匹配
- poj 3020 二分图最小路径覆盖
- poj 3020 Antenna Placement 二分图
- poj 3020 Antenna Placement 二分图匹配
- poj-3020-Antenna Placement-二分图
- poj-3020-二分图最大匹配
- POJ 3020二分图的最大匹配
- poj 3020 二分图最大匹配
- Antenna Placement poj 3020 二分图
- 【二分图】poj 3020 Antenna Placement
- POJ 3020 二分匹配
- poj 3020 (二分匹配)
- poj 1693 二分图
- poj 3041 二分图
- Simulator 慢动作问题
- SpringMVC访问静态资源的三种方式
- poj 1276 Cash Machine 多重背包
- Git10--分支管理
- 组合补考的我且先装个比,竞赛图中求汉密尔顿圈算法设计
- poj 3020 二分图
- 凸优化笔记(三)--凸函数
- Android 热修复 - AndFix 使用心得
- displaytag 中文问题 探索日志 注释
- Git11--创建与合并分支
- C语言面试之CPU控制
- 2.2 Nand flash驱动移植--分区
- 函数指针
- 数据结构学习之路-第一章:绪论