poj1408--Fishnet(求多边形面积)

Fishnet

Time Limit:1000MS     Memory Limit:10000KB     64bit IO Format:%I64d & %I64u

Submit Status

 

Appoint description: System Crawler  (2013-02-19)

Description

A fisherman named Etadokah awoke in a very small island. He could see calm, beautiful and blue sea around the island. The previous night he had encountered a terrible storm and had reached this uninhabited island. Some wrecks of his ship were spread around him. He found a square wood-frame and a long thread among the wrecks. He had to survive in this island until someone came and saved him. 

In order to catch fish, he began to make a kind of fishnet by cutting the long thread into short threads and fixing them at pegs on the square wood-frame. He wanted to know the sizes of the meshes of the fishnet to see whether he could catch small fish as well as large ones. 

The wood frame is perfectly square with four thin edges on meter long: a bottom edge, a top edge, a left edge, and a right edge. There are n pegs on each edge, and thus there are 4n pegs in total. The positions of pegs are represented by their (x,y)-coordinates. Those of an example case with n=2 are depicted in figures below. The position of the ith peg on the bottom edge is represented by (ai,0). That on the top edge, on the left edge and on the right edge are represented by (bi,1), (0,ci) and (1,di), respectively. The long thread is cut into 2n threads with appropriate lengths. The threads are strained between (ai,0) and (bi,1),and between (0,ci) and (1,di) (i=1,...,n). 

You should write a program that reports the size of the largest mesh among the (n+1)2 meshes of the fishnet made by fixing the threads at the pegs. You may assume that the thread he found is long enough to make the fishnet and the wood-frame is thin enough for neglecting its thickness. 
 

Input

The input consists of multiple sub-problems followed by a line containing a zero that indicates the end of input. Each sub-problem is given in the following format. 
n 
a1 a2 ... an 
b1 b2 ... bn 
c1 c2 ... cn 
d1 d2 ... dn 
you may assume 0 < n <= 30, 0 < ai,bi,ci,di < 1

Output

For each sub-problem, the size of the largest mesh should be printed followed by a new line. Each value should be represented by 6 digits after the decimal point, and it may not have an error greater than 0.000001.

Sample Input

20.2000000 0.60000000.3000000 0.80000000.1000000 0.50000000.5000000 0.600000020.3333330 0.66666700.3333330 0.66666700.3333330 0.66666700.3333330 0.666667040.2000000 0.4000000 0.6000000 0.80000000.1000000 0.5000000 0.6000000 0.90000000.2000000 0.4000000 0.6000000 0.80000000.1000000 0.5000000 0.6000000 0.900000020.5138701 0.94762830.1717362 0.17574120.3086521 0.70223130.2264312 0.534534310.40000000.60000000.30000000.50000000

Sample Output

0.2156570.1111120.0789230.2792230.348958

 

题意很简单，在1*1的正方形块中每条边有n个点，对应边的对应点连线，将正方形分割成(n+1)*(n+1)个小正方形，求出小正方形中的最大的面积。

先储存下每个点的坐标，然后用叉积计算出各个小正方形的面积，找出最大值。

 

#include <cstdio>#include <cstring>#include <algorithm>#include <cmath>using namespace std ;#define eps 1e-8struct node{    double x , y ;} p[40][40];double a[40] , b[40] , c[40] , d[40] ;node f(node a1,node a2,node b1,node b2){    node q = a1 ;    double t = ( (a1.x-b1.x)*(b1.y-b2.y) - (a1.y-b1.y)*(b1.x-b2.x) ) / ( (a1.x-a2.x)*(b1.y-b2.y) - ( a1.y-a2.y )*(b1.x-b2.x) ) ;    q.x += (a2.x-a1.x)*t ;    q.y += ( a2.y-a1.y )*t ;    return q ;}int main(){    int n , i , j ;    double k , max1 , ans ;    while( scanf("%d", &n) && n )    {        p[0][0].x = p[0][0].y = 0.0 ;        for(i = 1 ; i <= n ; i++)        {            scanf("%lf", &a[i]) ;            p[0][i].x = a[i] ;            p[0][i].y = 0.0 ;        }        p[0][n+1].x = 1.0 ;        p[0][n+1].y = 0.0 ;        p[n+1][0].x = 0 ;        p[n+1][0].y = 1.0 ;        for(i = 1 ; i <= n ; i++)        {            scanf("%lf", &b[i]) ;            p[n+1][i].x = b[i] ;            p[n+1][i].y = 1.0 ;        }        p[n+1][n+1].x = p[n+1][n+1].y = 1.0 ;        for(i = 1 ; i <= n ; i++)        {            scanf("%lf", &c[i]) ;            p[i][0].x = 0.0 ;            p[i][0].y = c[i] ;        }        for(i = 1 ; i <= n ; i++)        {            scanf("%lf", &d[i]) ;            p[i][n+1].x = 1.0 ;            p[i][n+1].y = d[i] ;        }        for(i = 1 ; i <= n ; i++)            for(j = 1 ; j <= n ; j++)            {                if( fabs( c[i]-d[i] ) < eps && fabs( b[j]-a[j] ) < eps )                {                    p[i][j].x = a[j] ;                    p[i][j].y = c[i] ;                }                else if( fabs( c[i]-d[i] ) < eps && fabs( b[j]-a[j] ) > eps )                {                    p[i][j].x = c[i]*(b[j]-a[j]) + a[j] ;                    p[i][j].y = c[i] ;                }                else if( fabs( c[i]-d[i] ) > eps && fabs( b[j]-a[j] ) < eps )                {                    p[i][j].x = a[j] ;                    p[i][j].y = a[j]*(d[i]-c[i]) + c[i] ;                }                else                {                    p[i][j] = f(p[0][j],p[n+1][j],p[i][0],p[i][n+1]) ;                }            }        node s1 , e1 , s2 , e2 ;        max1 = 0 ;        for(i = 0 ; i <= n ; i++)            for(j = 0 ; j <= n ; j++)            {                s1.x = p[i][j+1].x - p[i][j].x ; s1.y = p[i][j+1].y - p[i][j].y ;                e1.x = p[i+1][j+1].x - p[i][j+1].x ; e1.y = p[i+1][j+1].y - p[i][j+1].y ;                s2.x = p[i+1][j].x - p[i][j].x ; s2.y = p[i+1][j].y - p[i][j].y ;                e2.x = p[i+1][j+1].x - p[i+1][j].x ; e2.y = p[i+1][j+1].y - p[i+1][j].y ;                ans = ( fabs(s1.x*e1.y-s1.y*e1.x)/2.0 + fabs(s2.x*e2.y-s2.y*e2.x)/2.0 ) ;                max1 = max(max1,ans) ;            }        printf("%.6lf\n", max1) ;    }    return 0;}