poj 2923 Relocation (01背包+状态压缩)
来源:互联网 发布:淘宝美工速成b段班 编辑:程序博客网 时间:2024/05/01 17:14
Description
Emma and Eric are moving to their new house they bought after returning from their honeymoon. Fortunately, they have a few friends helping them relocate. To move the furniture, they only have two compact cars, which complicates everything a bit. Since the furniture does not fit into the cars, Eric wants to put them on top of the cars. However, both cars only support a certain weight on their roof, so they will have to do several trips to transport everything. The schedule for the move is planed like this:
- At their old place, they will put furniture on both cars.
- Then, they will drive to their new place with the two cars and carry the furniture upstairs.
- Finally, everybody will return to their old place and the process continues until everything is moved to the new place.
Note, that the group is always staying together so that they can have more fun and nobody feels lonely. Since the distance between the houses is quite large, Eric wants to make as few trips as possible.
Given the weights wi of each individual piece of furniture and the capacities C1 and C2 of the two cars, how many trips to the new house does the party have to make to move all the furniture? If a car has capacity C, the sum of the weights of all the furniture it loads for one trip can be at most C.
Input
The first line contains the number of scenarios. Each scenario consists of one line containing three numbers n, C1 and C2. C1 and C2 are the capacities of the cars (1 ≤ Ci ≤ 100) and n is the number of pieces of furniture (1 ≤ n ≤ 10). The following line will contain n integers w1, …, wn, the weights of the furniture (1 ≤ wi ≤ 100). It is guaranteed that each piece of furniture can be loaded by at least one of the two cars.
Output
The output for every scenario begins with a line containing “Scenario #i:”, where i is the number of the scenario starting at 1. Then print a single line with the number of trips to the new house they have to make to move all the furniture. Terminate each scenario with a blank line.
Sample Input
26 12 133 9 13 3 10 117 1 1001 2 33 50 50 67 98
Sample Output
Scenario #1:2Scenario #2:3
Source
TUD Programming Contest 2006, Darmstadt, Germany
题意:
有 n 个货物,并且知道了每个货物的重量,每次用载重量分别为c1,c2的火车装载,问最少需要运送多少次可以将货物运完。
分析: 找出所有状态(1.....(1<<n)-1)中选出可以用两辆车一次运完的状态;
思路:
解法为状态压缩DP+背包,本题的解题思路是先枚举选择若干个时的状态,总状态量为1<<n,判断这些状态集合里的那些物品能否一次就运走,如果能运走,那就把这个状态看成一个物品。预处理完能从枚举中找到tot个物品,再用这tot个物品中没有交集(也就是两个状态不能同时含有一个物品)的物品进行01背包,每个物品的体积是a[i],价值是1,求包含n个物品的最少价值也就是dp[(1<<n)-1](dp[i]表示状态i需要运的最少次数)。其实难点在于如何预处理,判断状态是否一次运走,可以运用01背包的部分思想;状态转移方程:dp[j|k] = min(dp[j|k],dp[k]+1) (k为state[i,1<=j<=(1<<n)-1])。算法复杂度O((2^N)*N)
代码:
#include<cstdio>#include<algorithm>#include<cstring>using namespace std;const int maxn=10;const int INF=0x3f3f3f3f;int a[maxn];bool vis[1<<maxn];int b[1<<maxn],dp[1<<maxn];int n,c1,c2;bool judge(int x){ memset(vis,false,sizeof(vis)); int sum=0; vis[0]=true; for(int i=0;i<n;i++) { if(x&(1<<i)) { sum+=a[i]; for(int k=c1;k>=a[i];k--) //01背包 if(vis[k-a[i]]) vis[k]=true; } } if(sum>c1+c2) return false; for(int i=0;i<=c1;i++) if(vis[i]&&sum-i<=c2) return true; return false;}int main(){ int t,T=1; scanf("%d",&t); while(t--) { scanf("%d%d%d",&n,&c1,&c2); for(int i=0;i<n;i++) scanf("%d",&a[i]); int tot=0; for(int i=1;i<(1<<n);i++) if(judge(i)) //判断是否一次运完 b[tot++]=i; for(int i=0;i<(1<<n);i++) dp[i]=INF; dp[0]=0; for(int i=0;i<tot;i++) for(int j=(1<<n)-1;j>=0;j--) { if(dp[j]==INF) continue; if(!(j&b[i])) dp[j|b[i]]=min(dp[j|b[i]],dp[j]+1); } printf("Scenario #%d:\n",T++); printf("%d\n\n",dp[(1<<n)-1]); }}
- poj 2923 Relocation (枚举+背包 | 状态压缩+01背包)
- poj 2923 Relocation(状态压缩+01背包)
- poj 2923 Relocation 状态压缩01背包
- poj 2923 Relocation 状态压缩+01背包
- POJ 2923 - Relocation(状态压缩+01背包)
- POJ 2923 Relocation(状态压缩+01背包)
- POJ 2923 Relocation(状态压缩+ 01背包)
- poj 2923 Relocation(状态压缩+01背包)
- poj 2923 Relocation(DP+状态压缩+01背包)
- poj 2923 Relocation(状态压缩+01背包)
- POJ 2923 Relocation(状态压缩+01背包)
- poj 2923 Relocation (01背包+状态压缩)
- POJ 2923 Relocation (状态压缩+背包)
- POJ 2923 Relocation(状态压缩+背包思想)
- POJ Relocation 状态压缩 01背包
- POJ 2923 Relocation(状态压缩DP+DP:01背包)
- poj 2923 Relocation(状态压缩加上01背包)
- POJ 2923 Relocation (状态压缩 0-1背包)
- 使用sar收集Linux服务器性能数据
- POJ 1064
- airbnb开源动画库lottie
- HBase学习笔记——物理模型
- Linux多线程编程(三)-----生产者与消费者(条件变量,信号量)
- poj 2923 Relocation (01背包+状态压缩)
- 《Spring设计思想》AOP实现原理(基于JDK和基于CGLIB)
- javascript中对两个NOT运算符的理解
- Codeforces Round #397 (Div. 1 + Div. 2 combined) 题解(CF765A,CF765B,CF765C,CF765D,CF765E,CF765F)
- 共享关于android的几本书
- 【BZOJ 3211】花神游历各国 &【 线段树区间开根】
- stm32
- SQL Server递归查询
- 获取手机短信并显示