XOOM 连接 wpa2 enterprise 网络 …

XOOM 连接 wpa2 enterprise 网络 解决方法：

参考文章：https://forums.motorola.com/posts/90de5e9ea2

Step 1: Obtain WiFi ACE（WiFi Advanced Configuration Editor）

Download and install the WiFi Advanced Configuration Editor fromthe Market

on your device.

Step 2: Create new wireless connection

Go to Settings > Wireless and network> Wi-Fi settings

Turn on Wi-Fi then click Add Wi-Fi network

Use the following settings:

Network SSID – Your_SSID_Name

Security - 802.1X EAP or 802.1X Enterprise

EAP method - PEAP

Phase 2 authentications - MSCHAPV2

Enter your Windows login ID and password, then click Save.

Once this network is saved, you will see two networkslabeled

Your_SSID_Name. If your device continually tries and fails toconnect

proceed to step 3.

Step 3: Editing the wireless configuration

Open WiFi ACE and select the Your_SSID_Name network, then KeyManagement.

De-select (remove check) WPA_EAP

Step 4: Restarting the wireless radio

Exit WiFi ACE and go back to the wireless settings screen. Turnoff

wireless then back on, you should see your device starting toconnect to

Your_SSID_Name.

Once connected, you will still see two networks namedYour_SSID_Name.

FYI: By selecting the Connected network you can get a detaileddisplay of

your current signal status.

Step 5: Changing your password (sometimesrequires re-entry to connect)

Open WiFi ACE and go to Enterprise Configuration and enter yournew

(current) windows login password.